The product satises the relevant safety
standards.
Read instructions before use.
The product must be recycled.
W
Applicable to the given situation (general
warning sign).
Class II protection device with double insulation
Only use inside.
Parameter description Parameter value
Product name Humidier
Model BCLB-2.3-WT
Rated voltage [V~]/
Frequency [Hz]
230/50
Rated power [W] 23
Protection class II
Capacity [l] 2,5
Humidication capacity
[ml/h]
280
Operation time with full
tank [h]
8
Recommended room cubic
capacity [m3 ]
125
Dimensions [mm] 200x185x265
W 0.8
TECHNICAL D
1.
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NO
THOROUGHL
USER MANUAL.
T
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. T
into account technological progress and noise reduction
opportunities, the device was designed to reduce noise
emission risks to the minimum.
LEGEND
The original operation manual is in German. Other
language versions are translations from German.
2.
A Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may
or serious injury or even death.
Whenever
and instructions, it shall mean humidier. Do not use in
very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover air inlets/outlets.
2.
a) The plug has to t the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. W
device increases the risk of damage to the device and
of electric shock.
c) Do not touch the device with wet or damp hands
d) Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
e) If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock
2.
a) Do not use the device in an explosion hazard zone,
for example in the presence of ammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
b) In case of doubt whether the product operates
correctly or nding damage please contact the
service centre of the manufacturer.
c) Only the service centre of the manufacturer can
make repairs of the product Do not attempt to make
repairs yourself!
d) If
(CO2 ) re extinguishers suitable for use on live
devices to put it out.
2.
a) Do not use the device when tired, ill or under the
inuence
can signicantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/ or knowledge unless they are supervised by
a person responsible for their safety or they have
received instructions on how to operate the device.
c) T
make sure the switch is on the OFF position before
connecting to a power source.
EN
USER MANU
3.
2.
a) When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
b) T
not
any screws
c) Clean the device regularly to avoid a durable
encrustation of dirt
d) The device is not a toy. Cleaning and maintenance
may not be carried out by children without adult
supervision.
e) It
device.
f) Do
towards walls, electrical appliances and furniture.
g) It is forbidden to tilt, overturn the device and to
ll and to empty the water tank if the device is
connected to the power supply.
h) It is forbidden to place the device on a carpet, towel
or blanket. The ventilation opening located on the
bottom of the device can be blocked and can cause
the device to overheat.
i) It is prohibited to cover the mist outlet from the
device.
3.
The
humidity.
The user is liable for any damage resulting from
nonintended use of the device.
1. Nozzle
2. W
3. Backlight switch
4. Intensity adjustment knob
5. Diode
6. Basis
EN
1
2
3
4
5
6
3.
Handling
• Replenish the tank with water according to the
instructions described in the point „T up/
emptying the water tank“
• The user has the possibility of adding fragrance oil
to the humidier.
• Connect the device to a power supply compatible
with the information on the nameplate.
• Switch on the device and set the steam intensity by
turning the knob (4). The diode (5) will turn green. In
the event that there is too little water in the tank, the
diode will turn red.
• The humidier has an automatic shut-o function
when the minimum water level in the tank is
exceeded.
• The device has a multi-coloured LED backlight. The
backlight is turned on by pressing the button (3)
• After the
knob and disconnect it from the power supply.
T
• Before commencement of emptying or lling
the water tank, it is necessary to disconnect the
humidier from the power supply!
• Remove the spray nozzle located at the top of the
device.
• Remove the water tank by lifting it up, turn it over,
unscrew the cap and then ll it with water,
• Only use clean, dirt-free water in order to ll the
device tank. It is recommended to use ltered
or distilled water. In case of using tap water it is
necessary to clean the device every month.
• Close the cap. Always verify whether the tank has
been properly closed.
• Place the container in the original position. Install
the nozzle.
3.
• Always unplug the device before cleaning it
• Use cleaners without corrosive substances to clean
each surface
• Use a soft cloth for cleaning.
• The lter. In case of using
water from the water supply network it is necessary
to clean the lter once a month by using
the water supply system by washing it under running
water.
• After cleaning the device, all parts should be dried
before reusing it.
• Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
dier from the actual machine.
3.
Appliance location
The work surface where the device will be located must
be suitable for the size of the appliance, please refer to
the measurements. The work surface must be levelled, dry,
heat-resistant
enable a proper use of the device. The surface must be
waterproof.
The device should be set at a distance of at least 3 meters
from electrical appliances.
7 7
21.11.2018
