729969
5
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
03
LESEN UND BEFOLGEN SIE ALLE
NACHSTEHENDEN SICHERHEITSHINWEISE.
Sicherheit der Arbeitsumgebung
Ihr Arbeitsplatz muss stets aufgeräumt sein.
Bedienen Sie den W-LAN 3D-Drucker nicht in der Nähe von entzündlichen
Flüssigkeiten, Gas oder Staub.
Elektrische Sicherheit
Schließen Sie den W-LAN 3D-Drucker ausschließlich an eine richtig geerdete Steckdose an.
Verwenden Sie den W-LAN 3D-Drucker nicht an feuchten oder nassen Orten.
Setzen Sie den W-LAN 3D-Drucker keiner direkten Sonneneinstrahlung aus.
Verwenden Sie den Drucker nicht während eines Gewitters.
Bitte trennen Sie den Drucker vom Stromnetz, wenn Sie ihn über einen längeren
Personenschutz
Berühren Sie die Düse und die Arbeitsplatte nicht während des Drucks.
Berühren Sie die Düse nach dem Ende des Druckvorgangs nicht.
Kleiden Sie sich richtig. Tragen Sie keine lose Kleidung oder Schmuck. Halten Sie Haare, Kleidung
und Handschuhe von beweglichen Teilen fern.
Bedienen Sie den Drucker nicht, wenn Sie übermüdet sind, unter dem Einfluss von Drogen,
Alkohol oder Medikamenten stehen.
Warnungen
Lassen Sie das Gerät nicht über einen längeren Zeitraum unbeaufsichtigt.
Nehmen Sie keine Veränderungen am Gerät vor.
Senken Sie die Arbeitsplatte vor dem Einführen/Entfernen des Fillaments ab.
(Die Distanz zwischen Düse und Arbeitsplatte muss mindestens 50 mm betragen)
Benutzen Sie das Gerät in einer gut belüfteten Umgebung.
Verwenden Sie das Gerät niemals für ungesetzliche Zwecke.
Verwenden Sie das Gerät niemals, um Behälter für die Aufbewahrung von
.
Electrical Safety
Electrical Safety
Personal Safety
Personal Safety
Cautions
Cautions
You must always keep your workingspace clean.
You must always keep your workingspace clean.
Dont use the Wi 3D-Printer near inammable liquids, gas or dust.
Dont use the Wi 3D-Printer near inammable liquids, gas or dust.
Keep the W-LAN 3D printer out of reach of children and untrai-
ned persons.
Keep the W-LAN 3D printer out of reach of children and untrai-
ned persons.
Only connect the W-LAN 3D Printer to a properly grounded power outlet.
Only connect the W-LAN 3D Printer to a properly grounded power outlet.
Avoid using the device during an thunderstorm.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
In case of uncertain accident, please unplug the device if you do not use it for long.
Do not use Adventurer 3 in damp or wet locations. Do not expose Adventurer
3 to burning sun.
Do not use Adventurer 3 in damp or wet locations. Do not expose Adventurer
3 to burning sun.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after nishing printing.
Do not touch the nozzle after nishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
To lower the build plate before loading/unloading lament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
To lower the build plate before loading/unloading lament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
Do not leave the device unattended for long.
Do not leave the device unattended for long.
Do not make any modications to the device.
Do not make any modications to the device.
Operate the device in a well-ventilated environment.
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.
Never use the device to make any electrical appliance.
Never put the model into your mouth.
Never put the model into your mouth.
Do not operate the device while you are tired or under the inuence of drugs, alcohol or
medication.
Do not operate the device while you are tired or under the inuence of drugs, alcohol or
medication.
Safety Notice
PLEASE READ AND STRICTLY FOLLOW ALL THE
SAFETY WARNINGS AND NOTICE BELOW
Work Environment Safety
Electrical Safety
Personal Safety
Cautions
You must always keep your workingspace clean.
Dont use the Wi 3D-Printer near inammable liquids, gas or dust.
Keep the W-LAN 3D printer out of reach of children and untrai-
ned persons.
Only connect the W-LAN 3D Printer to a properly grounded power outlet.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
Do not use Adventurer 3 in damp or wet locations. Do not expose Adventurer
3 to burning sun.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after nishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
To lower the build plate before loading/unloading lament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
Do not leave the device unattended for long.
Do not make any modications to the device.
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.
Never put the model into your mouth.
Do not operate the device while you are tired or under the inuence of drugs, alcohol or
medication.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bresser 2010100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bresser 2010100

Bresser 2010100 Bedienungsanleitung - Deutsch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info