729959
9
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Imprint | 11
Manual_7007310000000_MeteoTrend_Colour_en_BRESSER_v1216 9 / 10
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next setting.
5. Settings order: Year > Month > Day > Change day and month > 12/24-hours mode > Hours >
Minutes > Language >°C/°F
6. Finally press the MODE button to save the settings and exit the setting mode.
11 Alarm setting
1. Press ALARM button several times to select the desired alarm function: daily alarm (W) or single
alarm (S).
2. Press UP button when an alarm function has been selected to activate the alarm. The display
switches to the preset alarm time.
3. Press and hold ALARM button for approx. 3 seconds to enter the alarm time setting mode.
4. The value to be set flashes.
5. Press UP or DOWN button to change the value.
6. Press ALARM button to confirm and continue to the next setting.
7. Settings order: Hours > Minutes
8. Finally press the ALARM button to save the settings and exit the setting mode.
NOTICE!The pre-alarm (PRE-AL) can be activated only in combination with the daily (W) or
single alarm (S). Once the pre-alarm is activated, an alarm will sound at a preset time (15, 30,
45, 60 or 90 minutes) before the actual alarm time and when the outdoor temperature is below
3 °C.
12 Snooze function
1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will
sound again in 4 minutes.
2. Press AARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
13 Receiving measurements automatically
Once batteries are installed, the base station will display the indoor temperature readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
14 Manual measurement display
1. Press MEM button several times to display the saved values one after another.
2. Display order: Current values > MIN (lowest values) > MAX (highest values)
3. Press MEM button for approx. 3 seconds during highest or lowest value display to irrevocable de-
lete all saved values.
Saved highest and lowest values will be deleted automatically every day on 0:00!
15 Weather trend display
The weather station will calculate a weather trend for the next 12 hours on basis of the measured val-
ues.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bresser-7007310-meteotrend-colour

Suche zurücksetzen

  • Die Zeitumstellung von Sommer auf Winterzeit erfolgt nicht automatisch. Muß sie manuell durchgeführt werden? Eingereicht am 31-10-2021 12:51

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bresser 7007310 MeteoTrend Colour wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bresser 7007310 MeteoTrend Colour

Bresser 7007310 MeteoTrend Colour Bedienungsanleitung - Deutsch - 12 seiten

Bresser 7007310 MeteoTrend Colour Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info