Bedienungsanleitung Brita 3-Way Water Filter Dispenser (Seite 4 von 13) (Englisch)

504591

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

ENGLISH 3

3 BRITA 3-Way Water Filter Dispenser –

easy installation

Before starting, please check that you have all the components

listed above (see ﬁ g. 1) as well as the recommended tools.

There are 7 steps to the installation.

Prior to installation, read the Technical Data (chapter 7) and

the Important Information (chapter 9). The system cannot

be installed with a low pressure boiler as this might lead to

water damages.

After storage and transport below 0°C, the product must be

stored in the open original packaging for at least 24 hours at

the stated ambient temperatures (chapter 7) for operation.

3.1 Step 1: Selecting the carbonate hardness

setting (++/+) on the ﬁ lter head

The ﬁ lter head has been set to meet most European water con-

ditions. In some soft water areas though, you may wish to adjust

the ﬁ lter head to your local settings. To do so, ﬁ rst carry out a

carbonate test using the supplied testing strip. The strip can be

found in the outer wrapping of these Usage Instructions.

Using the testing strip:

• Let the red response ﬁ eld of the probe soak in a glass of your

tap water for 1 second (ﬁ g. 2).

• After 1 minute, compare the colour of the response ﬁ eld with

the table and read the appropriate setting from the table.

Depending on the colour of the testing strip, we recommend

setting your ﬁ lter head as follows:

Setting + ++

Colour

Red, orange,

yellow

Green, dark

green

Capacity 1000 L 500 L

German Carbonate

Hardness [°dH]

up to 8.5 above 8.5

English Carbonate

Hardness [°eH]

up to 10.6 above 10.6

Setting + ++

French Carbonate

Hardness [°fH]

up to 15.2 above 15.2

Grains per Gallon CaCO3

[gpg CaCO3]

up to 8.9 above 8.9

Milligram per Litre CaCO3

[mg/L CaO3]

up to 151 above 151

The ﬁ lter head is set to “++” by default. To change the setting,

use an Allen key (4 mm). Turn in the direction of the arrow until

the “+” appears in the window (ﬁ g. 3).

The ﬁ lter head contains a ﬂ ow regulator already installed which

guarantees smooth water ﬂ ow from your dispenser even at higher

water pressures.

3.2 Step 2: Starting the BRITA electronic

cartridge exchange indicator

A Commissioning:

Please insert the enclosed batteries (2 x AA) into the appropriate

compartment of the BRITA electronic cartridge exchange indicator

with display. A long beep will sound after insertion of the batteries.

B Initial programming with ++ or + setting (see step 1):

Important: The BRITA electronic cartridge exchange indicator has

been set to 90 days to co-ordinate with the cartridge ﬁ ltration set-

ting of “++”. Both of these default settings will deliver optimum

ﬁ ltration performance for most water conditions.

Caution: Please, ensure that you activate the electronic BRITA

cartridge exchange indicator with display during the day so that the

signal can start during the day.

Initial programming with ++ setting (see ﬁ g. 4):

a Press the DISPLAY button brieﬂ y to activate the display. Initially,

the default setting of 90 days is displayed.

b Then press the START/RESET button brieﬂ y to activate the

90-day timer.

c A ﬂ ashing spot in the bottom left of the display indicates that the

timer has begun.

Initial programming with + setting (see ﬁ g. 4):

a Press the DISPLAY button brieﬂ y to activate the display. Initially,

the default setting of 90 days is displayed.

b Press and hold the DISPLAY button and then press the

START/RESET button brieﬂ y at the same time. This activates

the setting mode.

(ﬁ g. 2)

(ﬁ g. 3)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brita 3-Way Water Filter Dispenser Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info