BRIT
Kindersicherheit GmbH
Kindersicherheit GmbH
Theodor-Heuss-Str
89340 Leipheim
Germany
+49 (0) 8221 3670 199
BRIT
1 Churchill Way W
Andover
Hampshire SP10 3UW
United Kingdom
+44 (0) 1264 386034
BRIT
Jörgen Kocksgatan 4
SE-211 20 Malmö
Sweden
www.britax-roemer
BRIT
30 32
26
20
32 26
45
45
32
30
26
20
07
26
19
08
44
21 32
20
21
44
08 22 20
19 19
09
20 21
09
18
19
08
ww
EN
ADV
2000034433 A4
User instructions
76 - 150 cm
T
T
tofunction correctly
lation or by external objects. Such malfunctions may be:
• When you press the red r
• The buckle clips no longer engage (i.e. they pop out again when you try to push
them in).
• The buckle clips do not engage without an audible click.
• The buckle clips are dicult to push in (you feel a certain amount of r
• It takes a lot of force t
Remedy
Rinse out the harness buckle so that it works perfectly again:
CLEANING THE HARNESS BUCKLE
1. Open the V 31 and remove it.
2. Remove the grey release plat 32 as described in Section “10. REMOVING
THE5-POINT HARNESS AND RE-A
3. Place the release plate 32 along with the harness buckle 20 in warm water
withsome washing-up liquid for at lease one hour
4. Thoroughly rinse the harness buckle 20 and dry it completely
5. Attach the grey release plat 32 as described in Section 10. “ REMOVING
THE5-POINT HARNESS AND RE-A
6. Attach the crotch cushion 31 .
CLEANING
CAUTION Please ensure that you use only original BRIT
covers, as the seat cover is an integr
correct functioning of the system. Replacement seat covers ar
dealer
CAUTION! The child seat must not be used without its cover
• The seat cover can be removed and washed with a mild deter
machine with the “Delicates” progr
onthe washing label of the seat cover
• The shoulder cushions can be removed and washed in lukewarm soapy wat
•
water
Removing the shoulder cushions
1. Loosen the shoulder str 08 as far as possible.
2. Open the shoulder cushions 19 by the Velcro fast
Child seat back
3. Bring the top tether 13 forward over the front of the seat.
4. Unhook the stor 14 at the top.
5. Pull out the shoulder str 08 a little so that you can see the rubber loops
oftheshoulder cushions 19 underneath.
6. Unhook the rubber loops from the plastic bars 41 on the shoulder strap height
adjuster 42 .
7. Pull the shoulder cushions 19 forwards out of the harness slots.
Reattaching the shoulder cushions
Simply follow the steps above in reverse or
CAUTION The shoulder cushions 19 and belts must not be twisted or swapped
over08 must be located under the black cover band 43
inthe shoulder cushions 19 .
08
19 14
13
41
42
08
43
Removing the cover
Headrest
1. Open the two press studs 33 at the belt slots.
2. Push the headr
3. Pull the elastic band up fr 34 out
ofthetwo slots in the seat pan.
4. Pull the cover edge out of the gap between the seat pan and the inlay cushion.
5. Unhook the rubber loops 35 under the headrest.
Seat pan
6. Undo the V 31 and remove it.
7. Open the four press studs 36 on the seat and back surface.
8. Push the harness buckle 20 or SecureGuard 26 through the cover slot.
9. Unhook the rubber loops 37 at the front under the seat surface and pull the tabs
38 out of the seat pan.
10. 28 .
1 Pull the cover edge and tabs 39 out of the gap between the seat pan
andtheinlay cushion.
12. Pull the rubber loops 40 at the top of the back of the backrest out of the gap
inthe seat pan and and unhook them.
Reattaching the cover:
Simply follow the steps above in reverse or
33
34
35
31
20
36 37
38
28 40
39
CAUTION! If the child seat is installed with Method A , always install the harness
buckle 20 correctly, and if installed with Method B , always install SecureGuard
26 correctly32 is correctly attached.
CAUTION! Check that the str
the slots in the cover
buckle 20 and the front slot is provided for the SecureGuard 26 . The slot at the
front edge of the seat is for the harness adjusting str 22 .
3. C GENERAL SAFETY INS 2. USE IN THE VEHICLE
Please take the time to r
them in the storage pouch pr
14 on the child seat for later refer
The instructions must accompany the child seat if it is later passed on to
athird party
DANGER! F
•
of the child seat can get jammed in the door
sible that the child seat may be damaged without the damage being immediately
visible. In this case the child seat must be replaced. Please dispose of it properly
•
ground).
•
all the mechanical parts are fully functional.
•
•
Never leave your child unattended in the child seat in the vehicle.
•
• When not in use, protect the child seat from direct exposure to sunlight.
The child seat can become very hot in direct sunshine. Children's skin is sensi-
tive and could be harmed as a result.
•
The more snugly the belt ts over your child's body-
fore, avoid having your child wear thick clothes under the belt.
•
about and play
•
your child's feet will not knock against the backrest of the front seat (to prevent
the risk of injury).
DANGER! F
In the case of an emergency stop or accident, unsecured objects or people may
cause injury to other occupants in the vehicle. Therefore, please always ensure that ...
•
instructions and those marked on the child seat.
•
down rear seat bench has snapped into place).
•
are held securely
• all persons in the vehicle have their seatbelts fastened.
•
a child.
W
•
•
T
jects (car door
•
Keep the child seat in a safe place when not in use. Do not place heavy objects
on the seat and do not store directly next to heat sources or in direct sunlight.
CAUTION! T
•
etc.) may show wear marks after a child seat has been used. For optimum
protection of your car seat covers, we recommend using the BRIT
car seat protector from our range of accessories.
Please observe the waste disposal regulations in your country
Disposal of packaging Container for cardboard bo
Seat cover Residual waste, waste inciner
Plastic parts T
according to the labels
Metal parts Container for metals
Belt straps Container for polyester
Buckle and clip Residual waste
9. DISPOSAL
10. REMOVING THE 5-POINT HARNESS AND RE-A
11. RE-A
4. Open the two press studs on the inside of the headrest cover
5. Release the two press studs on the back of the cover.
6. Release the two press studs on the seat cover and fold the cover forwards.
Whendoing so, pull the SecureGuard 26 out of the cover
7. Loosen the 5-point harness 09 on the child seat as far as possible.
Tip: P 18 .
8. Release the two opened shoulder cushions 19 from the V
around the shoulder str 08 .
DANGER Make sure that the shoulder str 08 pass correctly through theshoul-
der cushions 19 .
9. Remove the belt clips 21 from the recess provided on the 44 inside of the backrest.
10. 32 and push it along with the SecureGuard 26 towards
the backrest 30 .
1 32 around so that the harness buckle 20 is at the top
and the SecureGuard 26 is at the bottom .
“We r
Guard when the child to be secur
1. Loosen the 5-point harness on the child seat as far as possible 09 .
2. Open the harness buckle and place the belt clips 21 in the belt guides
onthesides.
3. Loosen the press studs on the backr
wards and the lower half downwards.
4. Insert the belt clips 21 in the recess provided on the 44 inside of the backrest.
5. Open the two shoulder cushions 19 by the V
6. Push the V 19 under the back-
restcover and attach it to the fleece strip pr
Check that the two shoulder cushions are not overlapping.
7. Pull the adjusting str 22 to tighten the harness.
8. Release the two press studs on the seat cover and fold the cover forwards.
Whiledoing this, pull the harness buckle 20 out of the cover.
9. Raise the grey release plat 32 and push it along with the harness buckle 20
towards the backr 30 .
10. T32 so that the SecureGuard (B ) 26 is at the top
and the harness buckle (A ) 20 is at the bottom .
1 Stow the harness buckle 20 in the recess provided and push the gr
32 back into the holder until it engages with an audible click.
12. Pass the Secur 26 through the slot in the cover with sow-on B .
Child seat back
1. Slide the headrest 07 to the lowest position.
2. Pr 45 , at the same
time moving it to the upper position.
Tip! The headr 07 can be adjusted for body heights between 76cm and
102cm.
Child seat front
3. Fold the lower part of the headr
13. Close the two bottom press studs on the cover
14.
15.
Tip! The headr 07 has two separat
as the headrest has been ext T
push the lock in the middle of the group change switch 45 and at the same time
move it to the top position.
Tip! The headr 07 can be set to body siz
12. 26 in the recess provided and push the grey release plat
32 back into its holder until it engages with an audible click.
13. 20 through the slot in the cover which is nearer
tothebackrest.
14.
15.
16.
2.3 Requirements
This child seat is approved for three installation methods, A , B1 and B2 . Use the
installation method depending on the size of the child t
Tip! The installation methods can be found in Section 5 “Installation & Use ”
[pageII].
Tip! Information on the vehicle seats can be found in the instruction manual for
the vehicle. If in doubt, refer to the manufactur
F(i-Size Universal ISOFIX)
Use installation method A . The child seat may only be used on the following vehicle
seats:
• V
• V
be secured of 9–18kg. In addition, the vehicle seat position must have a top t
anchorage point.
(i-Size boost
Use installation method B1 on vehicle seats with i-Size approval. The child seat may
also be used on vehicle seats which are included in the enclosed vehicle type list.
Alternatively, you may use installation method B2 on vehicle seats with i-Siz
proval or universal approval.
Tip! Some vehicle seats reduce the adjustability of the child seat. This aects the
“
133 cm - 150 cm (Specific vehicle booster seat)
Use installation method B1 or B2 . The child seat may only be used in vehicle seats
that are listed in the attached vehicle type list.
Tip! The latest version of this list can be obtained from our website.
ww
2.1 Use as intended
This child seat has been designed, tested and appr
ments of the European Standard for Child Safety Equipment (UN 129/03). It is
designed to secure a child in the vehicle. It may only be used on forward-facing or
rearnot a toy and is not suitable for use as a seat outside
the vehicle.
The child seat is approved for use both with and without the XP
2.2 SAFETY NO
Elimination of the protective function through modifications
Unauthorised technical changes can cause the prot
reduced or completely eliminat
are made to the child seat.
• Do not make any technical changes to the child safety seat.
• Only the manufacturer is permitted t
Risk of injury through improper use
If you do not use this product as intended, serious injury or death may result.
•Never secure the child seat with a 2-point seat belt.
• Read and follow the instruction manual for the vehicle used to transport this child
seat.
• If there is a front airbag, slide the vehicle seat a long way back.
• If in doubt, refer to the manufacturer or the vendor of the child r
• Use the child seat according to the body height of the child t
