Belt guide (bright red)
Belt holder Compartment for user manual
Headrest adjustment handle
Thank you for choosing
to keep your child safe through a new stage of
In order to protect your child correctly, the
must always be used
and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact
Blaubeurer Straße 71
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
1 Churchill Way West
Hampshire SP10 3UW
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
1. Press the button...
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt 18 in dark red and the lap belt
17 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with a 3-point belt.
Please nd the information on the seats approved for child safety seats of the weight classes 15
to 36 kg in the operating instructions of your vehicle.
The KID II is approved for one method of installation:
Symbol Installation type Approval type
with the vehicle's 3-point seatbelt universal
You can use your child safety seat as follows:
In the direction of travel yes
against the direction of travel no 1)
with 2-point belt no
with 3-point belt2) yes
on front passenger seat yes 3)
on outer rear seat yes
on centre rear seat (with
3-point belt) yes 4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the
vehicle seat is also approved for use by adults. The seat may not be in the area of effect of
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
Child safety seat
Testing and certication
In accordance with ECE* R 44/04
Group Body weight
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certied according
to the requirements of the European Standard for Child Safety Equipment
(ECE R 44/03). The seal of approval E (in a circle) and the approval number
are located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modica-
tions to the child safety seat. Only the manufacturer is permit-
ted to make modications to the child safety seat.
WARNING! Use the
exclusively for securing your child in your
vehicle. It is in no way suitable as a seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
6. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
1. Operate the release button of your vehicle seat
2. Pull out the diagonal belt 18 from the dark red belt
holder 02 on the headrest 05 .
The child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the corre-
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
2. Unhook the cover hooks 20 on the rear of the back-
rest 07 .
3. Remove the upper part of the cover.
4. Unhook the cover loops 21 at the bottom on the rear
of the backrest 07
5. Pull off the cover from the seat cushion 03 .
Removing the headrest cover
Unhook the cover loops
on the back of the head-
7. Unhook the cover hooks 20 on the front of the back-
rest 07 .
Pull off the cover of the headrest
►The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulls
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer or from an ADAC ofce.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts can be cleaned using soapy water. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
15 to 36 kg
(~4 to 12 years of age)
141210_KID_II_GB.indd 1 10.12.2014 11:00:17