767963
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
BRITAX RÖMER
Kindersicherheit GmbH
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
89340 Leipheim
Germany
+49 (0) 8221 3670 199
BRITAX Excelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
+44 (0) 1264 386034
BRITAX Nordiska Barn AB
Jörgen Kocksgatan 4
SE-211 20 Malmö
Sweden
www.britax-roemer.com | hello@britax-roemer.com
BRITAX RÖMER Child Safety EMEA
16
15
15 – 36 kg
22
10 22
19
19
20
22
19
06 07
03 16
www.britax-roemer.com
2000031236 19/12
GB
User instructions
KIDFIX² R
KIDFIX² S
15 kg – 36 kg
(~4 Y – 12 Y)
+
a
b
a
b
12
29
13
30
31
13
30
12
29
30
31
13
32
1. SAFETY NOTES 2. INTRODUCTION
5. ADJUSTING THE HEADREST
7. DISASSEMBLY AND DISPOSAL
4. USE IN THE VEHICLE 6. CARE AND MAINTENANCE
3. APPROVAL
If you have any further questions about the use of the child seat, please
contact us:
Please take the time to read these instructions carefully and keep
them to hand in the storage compartment provided on the child safe-
ty seat at all times! The instructions must accompany the child seat if
it is passed on to athird party!
DANGER! To protect your child:
In the event of an accident at acollision speed of more than 10 km/h, the
child seat may be damaged without the damage being immediately visi-
ble. In this case the child seat must be replaced. Please dispose of it
properly.
Always have your child seat checked if it has been damaged (e.g by fall-
ing to the ground).
Regularly check all important parts for damage. In particular, ensure that
all the mechanical parts are fully functional.
Never apply oil or grease to any parts of the child seat.
Never leave your child unattended on the child seat in the vehicle.
Only allow your child to enter and exit the vehicle on the pavement side.
Protect the child seat from intense direct sunlight when not in use. The
child seat can become very hot in direct sunshine. Children's skin is sen-
sitive and could be harmed as aresult.
The more snugly the belt fits over your child's body, the better the
child will be protected. Therefore, avoid having your child wear thick
clothes under the belt.
On long journeys, take regular breaks in order to give your child the
chance to run about and play.
DANGER! For the safety of all vehicle occupants:
In the case of an emergency stop or accident, unsecured objects or people
may cause injury to other occupants in the vehicle. Therefore, please always
ensure that ...
the backrests of the vehicle seats are locked (e.g. If there is afolding rear
seat bench, check that it is latched in place).
all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf)
are secured.
all persons in the vehicle have their seat belts fastened.
the child seat is secured whenever it is in the vehicle, even if not carrying
achild.
WARNING! For your protection when handling the child seat:
Never use the child safety seat in afree-standing position, even for testing.
When swivelling the backrest up, 12 nothing must come between the
back-rest 12 and the seat cushion 09 . You or your child’s fingers could be
jammed and injured.
To avoid damage, ensure that the child seat is not jammed in between
hard objects (car door, seat rails, etc.).
Keep the child seat in asafe place when not in use. Do not place heavy
objects on the seat and do not store it directly next to sources of heat or
in direct sunlight.
CAUTION! To protect your vehicle:
Certain car seat covers made from more sensitive materials (e.g. velour,
leather, etc.) may show signs of wear when achild seat is used on them.
For optimum protection of your car seat covers, we recommend using the
BRITAX RÖMER car seat protector from our range of accessories.
We are delighted that you have chosen our child seat to accompany your
child safely through anew stage in his or her life.
To protect your child correctly, the child seat must always be used and
installed as described in these instructions!
These instructions use the following symbols:
Symbol Keyword Explanation
DANGER! Risk of serious physical injury
WARNING! Risk of minor physical injury
CAUTION! Risk of material damage
TIP! Useful notes
Instructions that follow afixed sequence are numbered.
Example:
1. Press the button...
Belt guide colours
For clear dierentiation, the two vehi-
cle seat belts are shown in dierent
colours. The diagonal strap 16 is
shown in dark red and the lap belt 15
in bright red. The belt guides on the
child safety seat follow the same col-
our scheme.
BRITAX RÖMER
Child seat
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
KIDFIX² R
KIDFIX² S II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
This child seat has been designed, tested and approved according to the re-
quirements of the European Standard for Child Safety Equipment (ECE R
44/04). The certification mark (letter E in acircle) and approval number can
be found on the orange approval label (sticker on the child seat).
DANGER! The certification is invalidated if any modifications are made to
the child seat. Only the manufacturer is permitted to make modifications
to the child safety seat. The child seat is approved for use both with and
without SecureGuard.
WARNING! The KIDFIX² R and KIDFIX² S must be used exclusively for
securing your child in the vehicle. They are in no way suitable for use as
aseat or atoy in the home.
DANGER! Never secure your child or the child seat with a2-point belt. If
your child is secured in the child seat with a2-point belt only, this may
cause serious injuries, which could even be fatal.
Please refer to your vehicle’s instruction manual for instructions on
how to use child restraint systems. The seat can be used in vehicles with
ISOFIX anchoring systems (see type list) and in vehicles with 3-point
belts.
Please refer to your vehicle’s instruction manual for information on the
seats approved as child seats for weight class 15 to 36 kg.
The KIDFIX² R and KIDFIX² S are approved for two dierent installation
methods:
Symbol Installation type Approval type
with the ISOFIT locking arms in the ISOFIX fixing
points on the vehicle. Check the list of vehicle
types.
semi-universal a)
with the vehicle's 3-point seat belt universal
a) This means that the child seat may be used only in vehicles that are listed in the at-
tached vehicle type list. This type list is constantly being updated. The latest version
can be obtained from us or at www.britax-roemer.com
You can install your child seat as follows:
in the direction of travel Yes
against the direction of travel No1)
with 2-point belt No
with 3-point belt 2) Yes
with ISOFIX fixing points
(between seat surface and
backrest)
Yes
On front passenger seat Yes
3)
On outer rear seat Yes
on centre rear seat
(with 3-point belt) Yes
4)
1) Use is permitted on arear-facing vehicle seat (e.g. in avan or minibus) only if the vehi-
cle seat is also approved for use by adults. The seat must not be within the activated
range of an airbag.
2) The safety belt must be approved to ECE R 16 or acomparable standard (indicated on
the belt’s test label by an "E" or "e" inside acircle).
3) If there is afront airbag: Slide the car seat well back and follow the related instructions
in the vehicle’s instruction manual.
4) Cannot be used if the vehicle seat is equipped with a2-point belt only.
1. Grasp the adjustment handle 10 on the back of the
headrest 22 and pull it upwards. This unlocks the
headrest.
2. You can now move the unlocked headrest 22 to
the desired height. When you release the adjust-
ment handle 10 , the headrest 22 locks into place.
3. Place the child seat on the car seat.
4. Sit your child on the child seat and check the height.
Repeat the above procedure until the headrest 22 is
at the correct height.
A correctly adjusted headrest 22 ensures optimal positioning of the diago-
nal strap 16 , and gives your child optimum protection. The headrest 22
must be positioned so that two fingers can be inserted between your
child's shoulders the headrest 22 .
To adjust the height of the headrest to fit your child:
Please ensure that you only use original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils
important functions that ensure smooth operation of the system. Replace-
ment seat covers are available from your dealer.
The cover can be removed and washed with amild detergent, selecting
the “Delicates” programme on the washing machine (30 °C). Please ob-
serve the instructions on the washing label of the cover.
The plastic parts can be cleaned in soapy water. Do not use aggressive
cleaning agents (such as solvents).
DANGER! The child safety seat must not be used without the seat cover.
Removing the seat cover
1. Push the headrest of the vehicle seat to its top posi-
tion.
2. Unhook the cover hook 19 on the rear of the back-
rest.
3. Pull o the top part of the cover and fold it forwards
onto the seat surface.
4. Release the cover hooks 19 on the front of the back-
rest and on both sides of the seat surface and loosen
the plastic cards on the front of the seat cushion.
5. Pull the cover away from the seat surface.
Removing the headrest cover
1. Unhook the cover straps 20 on the rear of the back-
rest.
2. Unhook the cover hooks 19 on the front of the back-
rest.
3. Pull the headrest cover 22 o; to do this, detach the
two hooks on the bottom of the headrest.
The cover can now be washed. Please observe the
instructions on the washing label of the cover.
Putting the cover on
Follow the above steps in the reverse order to put the cover
on.
UNFASTENING YOUR CHILD:
To unfasten your child, press the release button on the car seat buckle.
DANGER! The child seat must always be secured when in the vehicle, even
if not carrying achild.
RE-ATTACHING THE BACKREST:
4. Follow steps 1 - 7 in paragraph 10.1 “Removing the backrest“ in the re-
verse order.
Please follow the disposal regulations applying in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal recycling
Plastic parts To be placed in the corresponding container
as labelled
Metal parts Container for metals
Belt straps Container for polyester
Buckle and clip Residual waste
1. Press the release button on car vehicle seat buckle.
2. Open the dark red belt holder 03 by pressing the
button on the belt holder 03 backwards, then pull out
the diagonal
belt 16 .
Only for installation type A (ISOFIT):
3. To release the ISOFIT fitting, squeeze the green lock-
ing button 07 and red release button 06 together, first
on one side then on the other.
The child safety seat can now be removed.
REMOVAL:
Remove the seat cover
1. Fold up the cover of the backrest
12
.
2. Fold the cover of the seat shell
29
forwards.
Remove the seat cover
1. Fold up the cover of the backrest
12
.
2. Fold the cover of the seat shell
29
forwards.
Remove SecureGuard
8.1
Installing SecureGuard
8.2
Remove SecureGuard
1. Press the SecureGuard
13
downward and slide the Se-
cureGuard
13
out of the recess
31
.
TIP! Keep the SecureGuard
13
for later use.
Attaching SecureGuard
1. Take the SecureGuard
13
and position it right in front of
the recess
31
.
2. Slide and press the metal plate
32
into the recess
31
until the plate
32
clicks into place.
We recommend using the seat with SecureGuard.
TIP!
The following chapters describe use with
SecureGuard.
3. Unhook the cover straps on the seat shell
29
.
4. Pull the SecureGuard
13
downward and away through the
seat cover.
5. Remove the plastic cards
30
of the seat cover from the seat
shell
29
.
6. Remove the cover and the seat cushion.
Mounting the seat cover
1. Position the seat cover on the seat shell
29
.
2. Insert the plastic cards
30
of the seat cover into the
designated recesses on the seat shell
29
.
3. Pull the seat cover over the seat shell
29
.
4. Hook the cover straps back onto the seat shell
29
.
5. Position the seat cover behind the backrest cover
12
.
3. Unhook the cover straps on the seat shell
29
.
4. Remove the plastic cards
30
of the seat cover from the
seat shell
29
.
5. Remove the cover and the seat cushion.
Mounting the seat cover
1. Position the seat cover on the seat shell
29
.
2. Pull the SecureGuard
13
through the slot in the seat
cushion.
3. Insert the plastic cards
30
of the seat cover into the desig-
nated recesses on the seat shell
29
.
4. Pull the seat cover over the seat shell
29
.
5. Hook the cover straps back onto the seat shell
29
.
6. Position the seat cover behind the backrest cover
12
.
8. Remove and install SecureGuard
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Britax-Romer KIDFIX 2 S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Britax-Romer KIDFIX 2 S

Britax-Romer KIDFIX 2 S Bedienungsanleitung - Deutsch - 2 seiten

Britax-Romer KIDFIX 2 S Bedienungsanleitung - Holländisch - 2 seiten

Britax-Romer KIDFIX 2 S Bedienungsanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info