3XOORIIVXI¿FLHQWODSDQGGLDJRQDOEHOW(approx.600 – 900mm). Open the lock-
off arm on the side opposite the seat belt buckle. Pull back the child seat cover
to reveal the crotch strap. Feed the belt through the lock-off belt guide and seat
shell slot (dia 4g), up on to the top face of the seat base, behind the crotch
strap (inset) and down through the slot on the other side of the child seat.
Open the other lock-off arm, feed the seat belt under the lock-off arm and
attach the tongue into the buckle (dia 4h).
Slide the loop ends of the tether straps between the front car seat and back
as shown (dia 4d). Bring the buckle ends of the tether straps around the
outside of the car seat and feed through the loops 2. Slide the buckle ends
under the seat. Snap the buckles of the tether straps onto the tongues on the
sides of the child seat 3. Provisionally tighten the tether straps by pulling the
loose ends downwards 4.
Pull all of the seat belt slack through the
child seat ensuring the seat belt is not
twisted (dia 4i). When the belt is as tight
as possible, close the lock-off arms on
BOTH sides of the seat ensuring that
they click into place.
If the buckle now lies in the position
marked as wrong with a and the seat
belt cannot be correctly tightened (dia 4j),
try another seating position in the car.
Finally tighten the tether straps by pulling
the loose ends downwards (dia 4k)
on lids of storage boxes or similar.
seat by trying to move it back and forth
and side to side. If it seems loose, you
In case the seat has now contact to the
dashbord to avoid pressure marks a
fabric piece can be placed in between as