644488
183
Zoom out
Zoom in
Vorherige Seite
1/186
Nächste Seite
BE-1204B-BC • BE-1206B-BC 11-3
Chapter 11 Connection and Installation of Optional Equipment
! Winding lower thread
W1328Q
1. Turn the power switch on.
2. Set the bobbin [1] in the bobbin winder shaft [2].
3. Put the thread through the thread guide [3].
4. Wind the thread around the bobbin [1] several times in the direction of the arrow.
5. Press the bobbin hold [4].
If the thread cannot be wound evenly, loosen the screw [5] and move the thread guide [3] right and left
for adjustment.
In order to wind more threads around the bobbin, loosen the thread [6] and move the bobbin hold [4].
6. After winding is finished, pull out the bobbin from the bobbin winder shaft and trim the thread using
the thread trimmer [7].
If the thread is wound too tight and comes off from the tension disk, loosen the knob [8]. If the thread is
too loose, tighten the knob [8].
If the circuit protector [9] functions, the bobbin winder motor does not rotate. Leave it for a while for
cooling. Then press the circuit protector [9]. (The thread does not come out when the motor is not
cooled enough.)
[3]
[5]
[8]
[3]
[7]
[2]
[1]
[9]
[4]
[6]
183

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother BE-1206B-BC Stand-Alone type wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info