631154
60
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
59
6
The fabric is
wrinkled.
You have not threaded the upper
thread properly or fitted the bobbin
properly.
Thread the upper thread and fit the
bobbin thread properly.
page 20, 23
You have not fitted the spool prop-
erly.
Fit the spool properly. page 23, 27
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 29
The needle is bent or blunt. Replace the needle. page 11, 12
If you are sewing thin fabric, the
stitch is too thick.
Sew with stabiliser material under
the fabric.
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 28
Stitches are
skipped.
You have not threaded the upper
thread properly.
Correct the upper threading. page 23
You have not used the right combi-
nation of fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 29
The needle is bent or blunt. Replace the needle. page 11, 12
You have not fitted the needle prop-
erly.
Fit the needle properly. page 12
Dust has accumulated under the
needle plate or in the shuttle.
Remove the needle plate cover and
clean the plate and the shuttle.
page 55
There is a high-
pitched noise
while sewing.
Dust has built up in the feed dogs or
in the shuttle.
Clean the shuttle. page 55
You have not threaded the upper
thread properly.
Correct the upper threading. page 23
The shuttle is scratched.
Replace the shuttle.
Contact your retailer or the nearest
authorized service center.
You have not used bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 18
The needle
threader can not
be used.
You have not moved the needle
holder to its highest position.
Turn the balance wheel toward you
(counterclockwise) to raise the nee-
dle holder to the highest position.
page 24
You have not fitted the needle prop-
erly.
Fit the needle properly. page 12
The stitch is not
sewn correctly.
The presser foot that you are using is
not correct for the type of stitch.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 28
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 55
Symptom Possible cause How to put it right Reference
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother Comfort 12 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother Comfort 12

Brother Comfort 12 Bedienungsanleitung - Deutsch - 63 seiten

Brother Comfort 12 Bedienungsanleitung - Holländisch - 63 seiten

Brother Comfort 12 Bedienungsanleitung - Französisch - 63 seiten

Brother Comfort 12 Bedienungsanleitung - Spanisch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info