Bedienungsanleitung Brother DCP-L2540DW (Seite 1 von 2) (Englisch)

585287

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Unpack the machine and check the components

Read the Product Safety Guide first, then read this Quick Setup Guide for the

correct installation procedure.

Manuals in Spanish for this model are available on the enclosed CD-ROM. (USA

only)

Manuales en Español para este modelo están disponibles en el CD-ROM

incluido. (sólo en Estados Unidos)

NOTE:

• The components included in the box and the AC power plug may differ

depending on your country.

• The illustrations in this Quick Setup Guide are based on the MFC-L2700DW.

• You must purchase the correct interface cable for the interface you want to use.

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet

(2 meters) long.

Network cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T

or 100BASE-TX Fast Ethernet Network.

Remove the packing materials and install the toner cartridge

Load paper in the paper tray

Connect the machine to your computer/mobile device

Connect the power cord and turn on the machine

Configure the machine for faxing (for MFC models only)

If you do not plan to use the fax feature on this machine, go to step 6.

Drum Unit

(Pre-installed)

AC Power Cord

(only for certain

models)

Quick Setup Guide CD‑ROM

Starter Toner

Cartridge

Telephone Line Cord

(For MFC models)

Product Safety Guide Basic User's Guide

A. Connect the telephone line cord

Adjust the paper guides.

• Windows

PC with a CD-ROM drive, go to step 6A

• Windows

PC without a CD-ROM drive, go to step 6B

• Macintosh, go to step 6B

• Mobile device users with a WPS/AOSS™-supported access point/router, go to step 6C

Back Front

Select your language (if needed)

1. (DCP model)

a. Press Menu.

b. Press ▲ or ▼ to display General Setup, and then press OK.

c. Press ▲ or ▼ to display Local Language, and then press OK.

(MFC model) Press Menu, 0, 0.

2. Press ▲ or ▼ to select your language, and then press OK.

3. Press Stop/Exit.

B. Set the date and time

Date

1. Press Menu, 0, 1, 1.

2. Enter the last two digits for the year on the dial pad,

and then press OK.

3. Enter the two digits for the month on the dial pad, and

then press OK.

4. Enter the two digits for the day on the dial pad, and

then press OK.

Clock Type

1. Press ▲ or ▼ to select 12h Clock or 24h Clock,

and then press OK.

Time

1. Enter the time using the dial pad, and then press OK.

 12h Clock only

Press ▲ or ▼ to select AM or PM, and then press

OK.

2. Press Stop/Exit.

NOTE:

• To complete fax setup on your machine, see the Basic User's Guide.

• Your machine is programmed to automatically receive faxes. To change this default mode, see the Basic User's Guide.

Remove the orange part.

Quick Setup Guide

DCP‑L2520DW / DCP‑L2540DW / MFC‑L2680W / MFC‑L2685DW /

MFC‑L2700DW / MFC‑L2705DW / MFC‑L2707DW

Not all models are available in all countries.

The latest manuals are available at the Brother

Solutions Center: solutions.brother.com/manuals.

Watch our FAQ Videos for help

with setting up your Brother

machine:

solutions.brother.com/videos.

Version D

USA/CAN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-L2540DW Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-L2540DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info