585305
198
Zoom out
Zoom in
Vorherige Seite
1/203
Nächste Seite
190
Important information for the toner cartridge life D
Colour/Mono setting on the printer driver D
Users can change the Colour/Mono settings on the printer driver as follows:
Auto
The machine checks the content of the document for colour. If colour is detected anywhere in
the document, it will print the whole of the document using the colour cartridges. In other words,
it will mix some of the toners to help achieve every shade detected in the document, increasing
the density of toner applied to the page. If no colour content is detected, it will print the
document in monochrome.
The default setting on your machine is Auto.
NOTE
The machine’s colour sensor is very sensitive and may perceive faded black text or an off-
white background as colour. If you know that your document is black and white and you want
to preserve colour toner, select Mono mode.
Colour
Whether the document contains colour or is just monochrome, your machine will print the
document using the colour cartridges.
Mono
Select this mode if the document has only black and greyscale text and/or objects. If your
document contains colour, this mode prints the document in 256 levels of grey using the black
toner.
NOTE
If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a colour
document, the print job cannot be completed. You can cancel your print job and choose to start
the print job again in Mono mode, as long as Black toner is available.
For more information about the settings in the printer driver, see Software and Network User's
Guide.
Toner Cartridge Life D
This product detects the life of the toner cartridges using the following two methods:
Detection by counting the dots of each colour that are necessary to create an image
Detection by counting the rotations of the developer roller
This product has a function that will count the dots of each colour used to print every document
and the rotations of each toner cartridge’s developer roller. The print operation will stop when
either one of the upper limits are reached. The upper limit is set above the number of dots or
rotations that would be required for the cartridge to perform consistently with its advertised
page yield. This function is intended to reduce the risk of poor print quality and damage to the
machine.
198

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-dcp-l8400cdn

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother DCP-L8400CDN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother DCP-L8400CDN

Brother DCP-L8400CDN Bedienungsanleitung - Deutsch - 77 seiten

Brother DCP-L8400CDN Installationsanweisung - Deutsch - 2 seiten

Brother DCP-L8400CDN Bedienungsanleitung - Deutsch - 214 seiten

Brother DCP-L8400CDN Bedienungsanleitung - Englisch - 77 seiten

Brother DCP-L8400CDN Installationsanweisung - Englisch - 2 seiten

Brother DCP-L8400CDN Bedienungsanleitung - Holländisch - 77 seiten

Brother DCP-L8400CDN Installationsanweisung - Holländisch - 2 seiten

Brother DCP-L8400CDN Bedienungsanleitung - Holländisch - 204 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info