613412
6
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
KNOWING YOUR SEWING MACHINE
5
THE MAIN PARTS
1 Bobbin winder (Page 12)
This winds the thread onto the bobbin for use as the
lower thread.
2 Stitch length dial (Page 11)
Rotate the dial to control the stitch length.
3 Spool pin (Page 12, 16)
This holds the spool of thread.
4 Upper tension-control dial (Page 26)
This controls the tension of the upper thread.
5 Thread guide (Page 12, 16)
This is used when winding the thread onto the
bobbin and then threading the machine.
6 Thread take-up lever (Page 17)
7 Thread cutter (Page 23)
Pass the threads through the thread cutter to cut
them.
8 Needle threader (Page 18)
(This is only available on certain models.)
9 Quick-set bobbin (Page 15, 20)
(This is only available on certain models.)
0 Flat bed attachment with accessory compartment
(Page 5)
A Presser foot (Page 8)
B Reverse sewing lever (Page 11)
Push this lever to stitch in the reverse direction.
C Pattern selection dial (Page 9)
Rotate the dial in either direction to choose the
stitch you want.
D Handwheel
Used to manually raise and lower the needle.
E Buttonhole fine-adjustment screw (Page 34)
F Main power and sewing light switch (Page 7)
You can turn the main power and sewing light
switch on and off.
G Foot controller jack / socket (Page 6)
Plug in the foot controller plug and connect the
machine to the power supply.
H Presser foot lever (Page 16)
Used to raise and lower the presser foot.
I Foot controller (Page 7)
You can use this to control the sewing speed, and to
start and stop sewing.
Foot Controller: Model KD-1902 for 110/120V area
Model KD-2902 for 220/240V area
The foot controller part code differs depending on the
country or region. Contact your dealer or the nearest
authorized service center.
Flat bed attachment
The accessories can be stored in a compartment inside
the flat bed attachment.
1
Slide the flat bed attachment to the left to
open it.
1 Flat bed attachment
2 Storage compartment
1
3
2
4
5
6
7
8
9
0
A
B
C
D
G
F
H
I
E
1
2
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother GS2500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info