Bedienungsanleitung Brother HL-2460 (Seite 2 von 2) (Englisch)

681811

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Back

Set

Reprint

Data

Job cancel

ON OFF

Back

Set

Reprint

Data

Job cancel

Back

Set

Reprint

Data

Job cancel

ON OFF

Turn the printer power

switch on.

Turn the printer power switch off.

Connect the interface cable to your PC, and

then connect it to the printer.

Click the Next button.

For Parallel interface cable users (For Windows

users only)

If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.

After the administrator has made the required settings, install the driver referring to the "Installing the

Driver for Network users" section of the Quick Network Setup Guide.

Step 6 Connect the printer to your PC & Install the printer driver.

Note: If "Add New Hardware Wizard"

appears, click the Cancel button.

Click "Connect the interface cable and

install the printer driver / utilities."

Select the parallel interface

cable.

Step 5 Print a test page.

Step 6 Install the driver & Connect the printer to your PC.

For Network users

If you print from a Macintosh computer, you will have to connect it to the printer via a Network

(Brother recommends using the NC-4100h network board).

For Macintosh

users

Click the OK button.

Note: When "Add New Hardware Wizard"

appears on your PC, click the Cancel

button.

Note: Install the driver before you connect

the USB interface cable to the printer. If you

have already connected it, remove it.

After your PC has restarted, click Start,

Setting and Printers.

Select the Brother HL-2460 series

(copy2) icon.

Click the File menu, and then select Set as Default printer.

The setup is now complete.

Make sure the printer power switch is on.

Connect the USB interface cable to your PC, and then connect

it to the printer.

For USB interface cable users (For Windows

users only)

Click "Connect the interface cable

and install the printer driver /

utilities."

Select the USB cable.

Follow the on-screen

instructions.

Click the Next button.

Control Panel

Data LED : Orange

Switches

Language Setting (Default is English)

Blinking

Off

For more information, see "CONTROL

PANEL" in Chapter 3 of the User's Guide on

the supplied CD-ROM.

Data remains in the printer buffer.

Receiving or processing data.

No remaining data.

Exit from the control panel menu, reprint settings and clear error messages.

Pause / Continue printing.

Stop and cancel the printer operation in progress.

Select the reprint menu.

Move forward and backward through menus.

Select the control panel menu.

Set the selected menus and the settings.

Go back one level in the menu structure.

1. Select the SETUP mode by pressing the

+ switch, and then press the Set switch.

2. Check that the LANGUAGE message appears, and then press the Set switch.

3. Choose your language by pressing the

+ or - switch, and then press the Set switch. An asterisk mark (

) appears at

the end of the display.

(You can return to the READY status by pressing the Go switch.)

Set

Back

Job Cancel

Reprint

Step 7 (For Windows

2000 users only) Set up your PC printer port.

Click the Finish button.

The setup is now complete.

Press the Go switch. The printer prints a test page.

Check that the test page has printed correctly.

Note: When you are ready to set

the Control Panel message

language, refer to the Control

Panel section at the bottom of

this sheet.

After the printer has finished warming up, the

READY message appears.

Plug the AC power cord into an AC

outlet.

Turn the power switch on.

Make sure that the printer power switch is off.

Connect the AC power cord to the printer.

Do NOT connect the interface cable.

For Windows

98/Me users: The setup is now complete.

For Windows

2000 users: Go to Step 7.

Follow the instructions for your interface cable

and operating system.

Unfold the tray

extension flap

REDAY

PRINTING

Note 1. A real time clock is built into this printer. Set the time referring to Chapter 3 of the User's Guide on the CD-ROM.

You need to set the time before you can use the log management and reprint functions.

2. Please enhance the RAMDISK size when you want to use the reprint functions without the optional HDD or

CompactFlash.

See RAM expansion in Chapter 4 of the User's Guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-2460 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-2460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info