463670
7
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
5
1
KNOWING YOUR SEWING MACHINE
THE MAIN PARTS
1 Bobbin winder (Page 16)
This winds the thread onto the bobbin for use as the
lower thread.
2 Spool pin (Page 16, 21)
This holds the spool of thread.
3 Thread guide (Page 16, 21)
This is used when winding the thread onto the bobbin
and then threading the machine.
4 Thread take-up lever (Page 21)
5 Hole for extra spool pin (Page 25)
This holds a second spool of thread for sewing with the
twin needle.
6 Stitch width dial (Page 15)
This controls the stitch width.
7 Upper tension-control dial (Page 25)
This controls the tension of the upper thread.
8 Thread cutter (Page 28)
Pass the threads through the thread cutter to cut them.
9 Needle threader (Page 22)
(This is only available on certain models.)
0 Quick-set bobbin (Page 19)
(This is only available on certain models.)
A Flat bed attachment with accessory compartment
(Page 10)
B Presser foot (Page 9)
C Reverse sewing lever (Page 15)
You can push this to stitch in the reverse direction.
D Pattern selection dial (Page 11)
You can turn this in either direction to choose the stitch
you want.
E Stitch length dial (Page 14)
This controls the stitch length.
F Buttonhole fine-adjustment screw (Page 36)
G Handwheel
Used to manually raise and lower the needle.
H Main power and sewing light switch (Page 8)
You can turn the main power and sewing light switch
on and off.
I Foot controller jack / socket (Page 7)
Plug in the foot controller plug and connect the
machine to the power supply.
J Presser foot lever (Page 21)
Used to raise and lower the presser foot.
K
Buttonhole lever (1-Step automatic buttonhole) (
Page 34
)
Lower the buttonhole lever when sewing buttonholes.
L Foot controller (Page 8)
You can use this to control the sewing speed, and to
start and stop sewing.
Parts Code for Zigzag Presser Foot: XC4901-051
Foot Controller: Model KD-1902
Parts Code: XC7359-022 (110/120V Area)
XC7438-222 (220/240V Area)
XC7456-222 (U.K.)
XC7455-022 (Australia, New Zealand)
1
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother XL-3600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother XL-3600

Brother XL-3600 Bedienungsanleitung - Deutsch - 51 seiten

Brother XL-3600 Bedienungsanleitung - Holländisch - 51 seiten

Brother XL-3600 Bedienungsanleitung - Französisch - 51 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info