650235
7
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
6
COK
COK
COK
COK
COK
COK
COK
To register an Executive handset to a
base station (if you have changed the
System Code from 0000)
Note
The number you save becomes the handset’s name
(ie. ‘Handset 1’).
Press the UP button to scroll to the
Base
menu.
Press OK to confirm.
Use the UP or DOWN button to scroll to
Base settings
.
Press OK to confirm.
Use the DOWN button to scroll to
Handsets
.
Press OK to confirm.
Use the DOWN button to scroll to
De-
register
.
Press OK to confirm.
Enter the System Code.
Press OK to confirm.
Use the UP or DOWN button to scroll to the
handset that you want to de-register.
Press OK to confirm.
This will time out and go back to idle.
Or
Press the C button until you get back to idle.
The handset is now de-registered.
To de-register an Executive handset
from the base
COK
COK
COK
Note
When planning to use a handset with more than one
base, we recommend that you:
Give a number to each base (from 1-4).
Number each handset (from 1-6).
Register your handset(s) at base 2
(and 3 & 4 if used) using the same internal
number as at base 1.
COK
COK
COK
COK
CODE
On the handset:
Use the UP button to scroll to
Base
.
Press OK to confirm.
The display will show
Register
.
Press OK to confirm.
Use the UP or DOWN button to scroll to
Automatic
.
Press OK to confirm.
The display will show
Searching for base
.
COK
COK
COK
At the base:
Press and hold down the PAGE button on the
base until it starts to flash.
On the handset:
Use the UP button to scroll to
Base
.
Press OK to confirm.
The display will show
Register
.
Press OK to confirm.
Use the UP or DOWN button to scroll to
select
Custom
.
Press OK to confirm.
Use the UP or DOWN button to scroll to the
required base number.
Press OK to confirm.
At this stage if you require you can edit the
base name.
Press OK to confirm.
Enter the System Code using the keypad.
Press OK to confirm.
The display will now flash
Searching for base
.
You will then see a list of the available handset
numbers.
Use the UP or DOWN button to scroll to the
number you require.
Press OK to confirm.
CODE
On-Air1000Classic/Exec(145x181) 15/8/00 5:42 pm Page 6
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BT On-Air 1000 additional handset wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info