Bedienungsanleitung BT Studio Plus 5100 (Seite 1 von 2) (Englisch)

650254

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Ofﬁces worldwide

The services described in this publication are subject to availability and may be

modiﬁed from time to time. Services and equipment are supplied subject to

British Telecommunications plc’s respective standard conditions of contract.

Nothing in this publication forms any part of a contract.

Registered Ofﬁce: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

Designed and produced by The Art & Design Partnership Ltd.

Printed in China / Issue 3 / ADP10-12

10%

General information

For information on safety instructions,

cleaning, technical information or

connecting to a switchboard, please

refer to the ‘General Information’

section in the full user guide at

www.bt.com/producthelp

Guarantee

Your BT Studio Plus 5100 is guaranteed for a period of

12 months from the date of purchase.

Subject to the terms listed below, the guarantee

will provide for the repair of, or at BT’s or its agent’s

discretion the option to replace the BT Studio Plus

5100, or any component thereof, (other than

batteries), which is identiﬁed as faulty or below

standard, or as a result of inferior workmanship or

materials. Products over 28 days old from the date

of purchase may be replaced with a refurbished or

repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that

occur within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent

as instructed.

This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

This guarantee does not affect your statutory rights.

For further information within and outside the 12

month guarantee, please refer to the full user guide at

www.bt.com/producthelp

Product disposal instructions

The symbol shown here and on the product

means that the product is classed as Electrical or

Electronic Equipment and should not be disposed with

other household or commercial waste at the end of its

working life.

The Waste of Electrical and Electronic Equipment

(WEEE) Directive (2002/96/EC) has been put in place

to recycle products using best available recovery and

recycling techniques to minimise the impact on the

environment, treat any hazardous substances and

avoid the increasing landﬁll.

Product disposal instructions for residential users

When you have no further use for it, please remove

any batteries and dispose of them and the product as

per your local authority’s recycling processes. For more

information please contact your local authority or the

retailer where the product was purchased.

Product disposal instructions for business users

Business users should contact their suppliers and check

the terms and conditions of the purchase contract

and ensure that this product is not mixed with other

commercial waste for disposal.

Warning

This equipment is not designed for making

emergency telephone calls when the power fails.

Alternative arrangements should be made for

access to emergency services.

R&TTE Directive & Declaration

of Conformity

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards.

This equipment complies with the essential

requirements for the Radio Equipment and

Telecommunications Terminal Equipment Directive

(1999/5/EC).

For a copy of the Declaration of Conformity

please refer to www.bt.com/producthelp

2 Charge

1 Remove the protective ﬁlm from the handset

screen and activate the batteries by pulling the

plastic tab away from the back of the handset.

2 Place the handset on the base to charge.

3 After 24 hours, plug the telephone line

cord into the telephone wall socket.

Important: Charge the handset batteries for 24 hours

or your phone may not work.

Set up your additional handsets (multipacks only)

1 For each additional handset and charger: plug the mains power adaptor (item code

048610) into the socket on the back of the charger, secure the cable behind the

retaining clip and plug the other end into the mains wall socket and switch the

power on.

2 Remove the protective ﬁlm from the handset screen and activate the batteries as

shown above.

3 Place the handset on the charger to charge for 24 hours.

If you ever need to remove the batteries, simply slide open the battery

compartment cover and using the ﬁnger holes grip the batteries and pull them out.

Your BT Studio Plus 5100 is now ready for use.

1 The telephone line cord

is pre-installed but don’t

plug the other end into

the wall socket yet.

3 Plug the other end of

the power adaptor

into the wall socket

and switch on.

Please

turn

over

Important: Only use the mains power adaptors, cables and rechargeable batteries

supplied in this box, or this product may not work. Any replacement rechargeable

batteries must be of the same type. BT accepts no responsibility for damage

caused to your BT Studio Plus 5100 by using any other type of batteries.

Check box contents

2 Plug in the mains power

adaptor (item code

048610). Secure power

adaptor cable behind

retaining clip on back

of base.

Handset

Handset Charger

Mains power adaptor

(item code 048610)

Mains power adaptor

(item code 048610)

Telephone line cord

(pre-installed)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

Base

Contents for each additional handset (multipacks only)

1 Plug in

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 24 hours before use.

1 Plug in

2 Charge

3 Go!

If you’d like further help, or to view the full user guide, please visit our website

bt.com/producthelp or call our helpdesk on 0800 218 2182*

* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.

User Guide

For a Better Future

We’re always looking to make our products last longer

and use less power, so we don’t have such a big impact

on the environment.

To ﬁnd out about what we are doing, visit

bt.com/betterfuture

BT Studio Plus 5100

Digital Cordless Phone

Setting up is easy. Just follow the simple steps in this guide.

BT Studio 5100 PLUS QSG [2-1].indd 1 31/10/2012 15:00

BT Studio Plus 5100 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BT Studio Plus 5100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info