Bedienungsanleitung Buderus Logano G115 WS (Seite 7 von 8) (Englisch)

555374

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Troubleshooting

Logano G115 WS US/CA – 6 720 804 873 (2012/10) 7

Information on the boiler room

3.7 Why is regular servicing important?

Heating systems should be regularly maintained for the following

reasons:

• to achieve a high level of efficiency,

• to operate the system economically (low fuel consumption),

• to maintain the cleanest possible combustion.

4 Troubleshooting

4.1 Identifying operating modes and resetting faults

Two type of fault are distinguished:

• Burner faults and

• Control and heating system faults

If there is a burner fault the fault indicator lamp on the burner comes on

(Æ burner documentation). Such faults can generally be reset by

pressing the reset button on the burner.

Controls and heating system faults are indicated on the control unit

display if it has one. More detailed information can be found in the

controls' documentation.

Fig. 5 Resetting the burner

[1] Burner

Correcting burner faults

B Press reset button on burner.

CAUTION: Risk of boiler damage from contaminated

combustion air.

B Keep the combustion air free of corrosive substances

(e.g. halogenated hydrocarbons that contain chlorine

or fluorine compounds).

B Prevent heavy accumulation of dust.

CAUTION: Risk of system damage from water.

B In the event of severe risk of flooding, disconnect the

boiler from its power supply and shut off the fuel

supply before water enters the boiler room.

B After the flood has subsided, ask your installer to

check the heating system before starting it up again.

B All parts that have been in contact with flood water

must be replaced by a qualified heating contractor.

CAUTION: Risk of system damage due to lack of or

inadequate cleaning and maintenance.

B Have your heating system inspected, cleaned and

maintained by a heating contractor once a year.

B We recommend you sign a contract covering an

annual inspection and maintenance on an as-required

basis.

CAUTION: Risk of system damage due to too many

resets. Always follow the burner manufacturer's

instructions.

Too many resets can damage the bur-ner's ignition

transformer.

B Do not press the reset button more than three

times in a row. If the fault does not reset after the

third attempt, localize and rectify the fault with

the help of the burner documentation. Notify a

service contractor if necessary.

CAUTION: Risk of system damage from freezing.

The heating system can freeze up in cold weather if

it has been switched off or disabled by a fault

shutdown.

B Rectify the fault immediately and restart the

heating system.

B If that is not possible, protect the heating system

against freezing by draining it at the lowest point.

Canadian installations of this boiler are required to be

equipped with a blocked vent switch (WMO) that

interrupts the burner in case of an obstructed flue gas

pipe. Call your boiler service technician if you suspect

the WMO may have tripped.

6 720 615 225-04.1RS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Buderus Logano G115 WS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Buderus Logano G115 WS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info