678305
135
Zoom out
Zoom in
Vorherige Seite
1/141
Nächste Seite
Chapter 11 Appendix
When the Power LED Blinks
White
The power LED will blink white during bootup or shutdown.
Red
If an error occurs, the power LED will blink red. You can also confirm the current status from Settings or NAS
Navigator2.
Code Description Corrective Action
E04 The firmware is corrupted.
Save the firmware file to the root directory of a
FAT32-formatted USB memory device. Power off the
LinkStation, connect the USB memory device, then
power the LinkStation back on. The firmware file will
be restored automatically.
86886.jp/ls500-r/
If the error is still present, contact Buffalo technical
support for assistance.
Note: By recovering the firmware, all the
LinkStations settings will be initialized to default
values, but the data on the LinkStation will be kept.
E10
The LinkStation is running on
the UPS battery due to a power
outage. The system will now be
shut down safely.
Check that power is being supplied to the UPS, and
that there are no problems, turn on the LinkStation.
E11
An error occurred with the fan
speed.
Check that no foreign objects or dust are clogging
the fan. If any foreign objects or dust are found,
use a pair of tweezers, air duster, or other tools to
remove them. If the error is displayed again, contact
Buffalo technical support for assistance.
E12
A rise in the system temperature
may have exceeded the
allowable safety value.
Do not place objects in the area around the
LinkStation. Also, move the LinkStation to a cool
location.
E14
The RAID array cannot be
mounted.
Run the RAID array disk check in Settings.
E15
The bad sectors have reached a
dangerous level.
Replace the defective drive.
E16 Unable to find the drive.
The drive may be disconnected or may have failed.
Shut down the LinkStation and reinstall the drive.
E22 Unable to mount the drive.
Format the drive. After formatting, if the error still
appears after rebooting, replace the drive. If the
error is displayed again, contact Buffalo technical
support for assistance.
E30 A drive error occurred. Replace the faulty drive.
134
135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo LinkStation 510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Buffalo LinkStation 510

Buffalo LinkStation 510 Bedienungsanleitung - Deutsch - 147 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info