678317
155
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
155
RAID Arrayx E14
Can’t Mount
RAID array X cannot be mounted. Run the RAID array disk check in Settings.
HDx Error E16
HDx Not Found
Unable to find hard drive X.
Hard drive X may be disconnected or may
have failed. After shutting down, reinstall the
hard drive.
HDx Error E22
HDx Can’t Mount
Mounting of hard drive X failed.
Format the hard drive. After formatting,
if the error still appears after rebooting,
replace the hard drive. If the error is displayed
again, contact Buffalo technical support for
assistance.
FailOver E27
LostBackupTarget
Unable to find the backup TeraStation.
In the main TeraStations settings, navigate to
Backup - Failover to reconfigure the backup
TeraStation for failover.
HDx Broken E30
Replace the DISK
An error occurred, so hard drive X was
removed from the RAID array.
Replace hard drive X.
E31 Power supply error (level 1)
Make sure that the AC cable is connected
properly. If the power supply has failed, E32
will be displayed within a few minutes. If E31 is
still displayed after 5 minutes, contact Buffalo
technical support for assistance.
E32 Power supply error (level 2)
Make sure that the AC cable is connected
properly. If the power status LED is blinking or
glowing red, replace the power supply with a
new Buffalo OP-PU-2RZ.
Status
After you change settings or format a hard drive, the current status is displayed on NAS Navigator2 or clicking in
Settings.
Message Description Corrective Action
HDx Warning I11
Bad Sectors
The bad sectors in hard drive x may
have reached a dangerous level.
Replace hard drive x.
Operation I12
DEGRADE MODE
Operating in degraded mode. -
RAID I13
ARRAYxFormatting
Formatting RAID array x. -
RAID I14
ARRAYx Checking
Checking RAID array x. -
RAID I15
ARRAYx Scanning
Examining the error status of RAID
array x.
Note: Transfer speeds are slower
during the examination process.
-
RAID I16
ARRAYx Creating
Creating RAID array x. -
RAID I17
ARRAYx Resyncing
Resynchronizing RAID array x.
Note: Transfer speeds are slower
during resynchronization.
-
155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation 7120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info