678321
110
Zoom out
Zoom in
Vorherige Seite
1/115
Nächste Seite
Status Shows “Failed”
If the two or more volumes are corrupted, the volume status will show “Failed” and the TeraStation will not be
accessible. Data cannot be recovered. In such a case, right-click the volume labeled “Failed” and click Delete Volume
in Disk Management.
After the volumes are deleted, create the desired RAID volume. Refer to chapter 3 for information on working with
volumes.
TeraStation Does Not Boot
If Windows Storage Server no longer functions properly, perform recovery using the supplied SD card. This recovery
procedure erases your data. Backing up regularly is highly recommended to avoid losing your important data.
Notice Before Recovery
Do not connect the SD card to another TeraStation or your computer. The recovery process that involves
using this SD card is intended for this product only.
Recovery is performed by deleting the area for drive 1, setting up a new 100 GB (Basic Disk/Simple) area, and then
copying the Windows Storage Server image to this area.
If there are system areas (or mirrored locations) on the drives other than drive 1, be sure to delete the system areas
(or disable the mirrored locations) before performing the recovery procedure. If recovery is performed without
deleting these areas, Windows Storage Server may not run after recovery is performed.
If Windows Storage Server fails to run, turn off the TeraStation and perform the recovery procedure again while all
hard drives except for drive 1 (disk 0) are disconnected. After recovery is complete, reconnect the disconnected
drives, which will appear in Disk Management as “Foreign. From Disk Management, right-click Foreign, select Import
Foreign Disks, then right-click this area and click Reactivate Volume to rebuild the RAID volume.
Recovering Windows Storage Server
1 Turn off the TeraStation, following the procedure on the Turning the TeraStation On and Off section in
chapter 1.
107
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Buffalo TeraStation WS5220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Buffalo TeraStation WS5220

Buffalo TeraStation WS5220 Bedienungsanleitung - Deutsch - 122 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info