Bedienungsanleitung Bugatti Vela evolution (Seite 13 von 16) (Englisch)

623954

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Advice and recommendations on use

12) Do not unscrew the jar (3) from the blade unit (5) until you wish to remove the blade unit (5) for cleaning.

If you loosen the jar (3) from the blade unit (5), the jar is no longer tight. Do not loosen the blade unit (5)

from the jar (3) while there is any liquid in the blender as this will cause the liquid to leak out of the bottom

of the jar (3).

13) The speed can be increased or decreased by the speed selector (12) even during the blending phase to

suit requirements.

14) When blending hot food or liquids wear oven gloves. Remove the measuring filler cup (1) and place

the lid (2) on the mouth of the jar. Never put your bare hand on the lid when the blender is running with

hot food or liquid inside the jar (3). In such cases, always work at minimum speed = 1.

15) Stop the blender after a few seconds to check the consistency of the food that you are blending.

16) The Vela Blender has an auto power-off function in order to avoid serious damages on the mechanical

parts of the complete blade unit (5). After 3 minutes of continuous working the blender will stop automatically.

To reset the function move the speed selector (12) to the zero (0) position and wait for 1 minute. In this

way the blender starts to work again.

B. Using pulse function (pulse button (14) )

1) Before using the blender, make sure that all parts of the jar and of the lid are perfectly assembled and

fixed in place.

2) This function can be used at all speeds at which the blender is running. Press this button (14) to achieve

maximum speed.

3) Rotate the speed selector (12) in the position "P". Only in this way t

he pulse function is activated. Then

press the pulse button (14) to make the blades rotate at the maximum speed until the pulse button (14) is

released.

4) When blending normally (setting speed on the speed selector (12) ) you can press the pulse button (14)

to obtain the maximum speed and keep this speed until you release the pulse button

(14). Once the pulse

button (14) is released, the blender will return to the speed set by the speed selector (12).

5) When blending hot food or liquids, wear oven gloves. Place the lid (2) over the mouth of the jar after

removing the measuring filler cup (1). Never place your bare hand on the lid when the blender is running

with hot food or liquid inside the jar (3).

6) Use a spatula only when the blender is switched off and the plug (7)

is unplugged from the socke

7) Stop the blender after a few seconds to check the consistency of the food that is being blended.

C. Using the Ice Function (ICE)

1) Adhere strictly to all safety, installation and commissioning instructions specified above.

2) Before using the blender, make sure that all parts of the jar and of the lid are perfectly assembled and

fixed in place

3) This function/program allows to optimize the ice crush performance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bugatti Vela evolution Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bugatti Vela evolution

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info