Bedienungsanleitung Bulex FE 500 (Seite 6 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

671805

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

2 Notes on the documentation

4 Installation instructions 0020246836_02

2 Notes on the documentation

2.1 Observing other applicable documents

▶ You must observe all the operating and installation in-

structions included with the system components.

2.2 Storing documents

▶ Pass these instructions and all other applicable docu-

ments on to the system operator.

2.3 Validity of the instructions

These instructions apply only to:

Product article number

FE 300/3 MR

0010020650

FE 400/3 MR

0010020651

FE 500/3 MR

0010020652

FES 300/3 MR

0010020653

FES 400/3 MR

0010020654

FES 500/3 MR

0010020655

FEW 300/3 MR

0010020656

FEW 400/3 MR

0010020657

FEW 500/3 MR

0010020658

FEWS 400/3 MR

0010020659

FEWS 500/3 MR

0010020660

3 Product description

3.1 Data plate

Explanations for the data plate can be found in the operating

instructions for this product.

3.2 CE label

The CE label shows that the products comply with the basic

requirements of the applicable directives as stated on the

identification plate.

The declaration of conformity can be viewed at the manufac-

turer's site.

4 Set-up, installation and start-up

You can find more detailed information about set-up, installa-

tion and start-up in the enclosed text-free/illustrated installa-

tion instructions.

5 Setting the target cylinder

temperature

Danger!

Risk of death from legionella.

Legionella multiply at temperatures below

60 °C.

▶ Ensure that the end user is familiar with

all of the Anti-legionella measures in order

to comply with the applicable regulations

regarding legionella prevention.

1. Set the target cylinder temperature.

– Water temperature: ≥ 60 ℃

2. Check the water hardness.

Water hardness: > 3.57 mol/m³

▶ Soften the water.

3. Check the conductivity of the water.

Conductivity at 20 °C between: 100 … 1,250 µS/cm

▶ Take measures to protect against corrosion.

4. Observe the applicable regulations regarding legionella

prevention.

6 Handing over to the operator

1. Teach the end user how to handle the installation. An-

swer any questions the operator may have. In particu-

lar, draw attention to the safety information which the

operator must follow.

2. Explain to the operator how the safety devices work and

where they are located.

3. Inform the end user that they must have the product

maintained in accordance with the specified intervals.

4. Provide the operator with all relevant instructions and

unit documentation for safe-keeping.

5. Inform the end user about the ways to limit the domestic

hot water outlet temperature so that scalding can be

prevented.

6. Inform the end user about the legionella protection

measures that have been taken.

7 Troubleshooting

7.1 Detecting and rectifying faults

▶ If problems occur whilst operating the product, check

certain points with the aid of the table in the appendix.

Detecting and eliminating faults (→ Page 6)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bulex FE 500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info