Bedienungsanleitung Bullit DVD7200BT (Seite 21 von 48) (Englisch)

497312

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 18 of 44 pages

DVD7200BT ENGLISH

When the monitor is open, the buttons  and  on the on-screen keyboard are also

available to change the frequency. Here you also have the option to search manually, by

pressing one of the buttons

 and  for three seconds. MANUAL will be indicated in the

corresponding field. If there is no entry for about seven seconds, the device will switch back

to automatic station search. The corresponding field on the screen will indicate “AUTO”

again.

Storing a station with the station buttons

With the station buttons “1”, “2”, “3”, “4”, “5”, and “6” you can preset six programming spaces

each on each level of the wave band (e.g. “FM 1“, “FM 2”, or “FM 3”). To store the station,

select the corresponding station with the station search or manually. Press one of the buttons

“1”, “2”, “3”, "4", "5" or "6" until the radio sound is briefly muted in order to store the station.

Now the station is stored at the station button you selected. When the monitor is open,

please keep your finger on the corresponding station field until the playback is briefly

interrupted. Now the station is stored at the corresponding position.

Storing stations with automatic station search

The automatic station search scans for the strongest available stations and stores these

under the station selection buttons “1” - “6”. In order to start the search, press the “P.SCAN”

button and keep it pressed for more than two seconds. Now the scanner allocates all station

positions at the current level of the selected wave band as long as enough stations with

sufficient reception quality are available. After the scanning has ended, the stored stations

are automatically matched up with their station names and the station stored at the station

position “1” can be heard. Now the device will briefly play all stations in sequence and then

stop at the station under the station button “1”. When the monitor is open, the PSCN field is

available to you for this function.

Calling up stored stations

In order to access the stored stations, select the desired wave range with the “BAND” button,

e.g. “FM 1”. Press one of the six station buttons and you will hear the station stored there.

The corresponding applies when the monitor is open.

Checking stored stations

For this function, the stations stored under the station buttons of a particular wave length are

scanned for about five seconds. In order to begin checking, briefly press the “P.SCAN”

button. The station positions “1” - “6” will begin flashing on the display in sequence and the

corresponding stations will be scanned. When the monitor is open, the currently scanned

memory position has a lighted background and PRESET will be indicated on the display. The

PSCN field will be available to you here as well. To remain at the currently scanned station,

press the “P.SCAN” button or the PSCN field again. Then the setting will remain at the last

scanned station. If no entry is made by the end of the complete search, the device will play

the first station on the corresponding level (e.g. F1 or FM 1).

LOC function

The “LOCAL” function is relevant for the station search. Here you can select whether only

local, strong stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for.

The “LOC” function prevents a corresponding switch to a stronger station as long as it isn’t

broadcasting the same program as the one currently being listened to. You can activate the

function by briefly pressing the screen button “LOC” once. Then the button switches colors

from grey to white. If the button sounds are turned on, a brief signal tone will follow. This

function can be turned off again by pressing the screen button "LOC" once more. Then the

color changes from white to grey again and this may be followed by a signal tone. This

setting only affects the radio mode and can only be carried out while the radio mode is

active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bullit DVD7200BT Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info