Bedienungsanleitung Bullit DVD7200BT (Seite 28 von 48) (Englisch)

497312

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 25 of 44 pages

DVD7200BT ENGLISH

position of “8” on one of the two sides, the speaker group on the opposite side will be muted.

To change this, turn the volume control dial again.

The setting is saved either when the desired value is confirmed by pressing the volume

control dial or through automatic storage (don’t change anything on the device for approx.

five seconds). If you confirm the selection by pressing the volume control dial, you will reach

the next possible setting. If you use the automatic memory, the device will return to the

standard display.

Changing the volume distribution (FADER)

After pressing the volume control dial four times, the settings for the speaker distribution

between the front and rear speaker group (FADER) will be reached. The message “FAD” will

appear on the display along with the set volume ratio between the front and rear speaker

group (e.g. “FAD 2F”). To change the ratio between the speaker groups, turn the volume

control dial clockwise or counter-clockwise. Depending on the direction in which the volume

control dial is turned, an “R” or an “F” will appear on the display, together with a digit (e.g.

“F2” or “R3”). These provide information about the direction in which the volume ratio is

changed and about the amount of the change. The ratio between the right and left speaker

group can be set in a range between “F8” and “R8”. The volume ratio between the speakers

changes according to the setting. The volume of one speaker group increases, the other

decreases. If the ratio is set to “R-F”, the volume on both speaker groups is the same. If the

control dial for one of the two speaker groups is turned to the maximum setting “8”, the other

speaker group is muted. To change this, turn the volume control dial again.

The setting is saved either when the desired value is confirmed by pressing the volume

control dial or through automatic memory (don’t change anything on the device for approx.

five seconds). If you confirm the selection by pressing the volume control dial, you will return

to the standard display. If you use the automatic memory, the device will return to the

standard display.

Note:

If you press the volume control dial again after you reach the last settings option (here

FADER), you will return to the standard display. If no changes are made for five seconds, the

device will automatically return to the initial display. In DVD mode (with an open monitor), the

settings option FADER is also followed by the functions BRIGHT, CONTRAST, COLOR and

SHARP.

Menu settings level 2

You can reach menu level 2 by pressing the volume control dial for approx. two seconds.

The individual menu items can be reached by repeatedly pressing the control dial. At menu

level 2, the functions “LOC” (distance setting for station search), “LOUD” (sound setting),

“ST-MO” (switching between stereo and mono playback), “CT” (set time of day), “TAVOL”

(standard volume for traffic announcements), “EON” (automatic station switch for traffic

announcements), “D/Z” (setting of the second playback level - DUAL ZONE) can be set.

When the monitor is open, the functions referred to above are available to you under the

following alternate terms: ST-MO = STMO, CT = TIME, TAVOL = TA VOL.

LOC function to set the station search

The “LOCAL” function is relevant for the station search. Here it can be selected whether only

local, strong stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for.

The “LOC” function prevents a corresponding switching to a stronger station as long as it

isn’t broadcasting the same program as the one currently being listened to. To activate the

“LOC” function, press the volume control dial until menu level 2 is reached. The “LOC”

function will appear. Now you have the option of activating (“LOC ON”) or deactivating (“LOC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bullit DVD7200BT Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info