497312
32
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Page 29 of 44 pages
DVD7200BT ENGLISH
Audio settings
Menu entry Function
Analog audio
settings
Here you can set the format in which the DVD sound should be played back.
STEREO = analog stereo signal RIGHT / LEFT = Dolby Pro Logic stereo
signal (2 channel sound) SURROUND = Virtual surround sound If STEREO
has been switched on, “STR“ will appear, for RIGHT / LEFT, “LTRT“ will
appear, and for SURROUND, “VSR“.
Digital audio
settings
This menu allows you to set the behavior of the digital output (SPDIF). Digital
output: Here you can set how the output should be performed. “SPDF ON”
puts out the maximum available sound quality through the connection. If this
option is set, the abbreviation “RAW” will be indicated on the display. “ONLY
PCM” puts out a 2 channel stereo digital sound through the output. “SPDIF
OFF” turns off the output through the digital connection.
LPCM (linear PCM)
OUTPUT allows you to select either the audio CD standard (48K) or the DVD
standard (96K).
Dolby digital
settings
Through this menu you can adjust the behavior of the Dolby function
according to your own preferences and determine the desired type of output.
Stereo = stereo sound, R-mono and L-mono each play back the sound only
through the selected channel. The setting mix-mono only functions during the
DVD playback with DTS 5.1. In addition, you have the option of setting the
level of the linear compression. Different levels are available to you here
(OFF, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, FULL).
Equalizer
settings
Through this function you can adjust the tone color of the output sound
according to your own preferences. Through the EQ type, you can select the
preset sound settings. The menu item bass increase just allows you to
increase the bass frequencies. With super bass, you have an additional
option of increasing the bass output. The setting treble increase also allows
you to increase the treble levels correspondingly.
3D Effect
settings
Through this function you can adjust the sound effects of the output sound
according to your own preferences. The echo mode setting enables you to
select one of the preset reverberating effects.
HDCD
The HDCD function enables you to carry out certain settings if you are using
such a data carrier. Because of the low market distribution of this type of data
carrier, this function is turned off by default.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bullit DVD7200BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info