162959
4
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
NAV3500BT ENGLISH
- Before the final installation of the device into a DIN insertion compartment in the dashboard,
connect the cables and test the connections.
- Only use the accessories included in the delivery. Usage of unauthorized components can
cause damages.
- If you need to drill holes or make other changes for the installation, consult a specialized
workshop in your area.
- This device is designed for a vehicle power supply of 12 V with the ground on the car body
(negative pole). Check the battery voltage before installing it into a camping vehicle, bus, or
truck.
- To avoid short circuits, the battery has to be disconnected before the installation.
- Read the guidelines in this handbook for the connection of the power supply and other
options.
- Secure the installed cables with insulating tape, cable ties, or cable clamps. To protect the
cables from damage, use insulating tape when guiding them past metal components. Place
and secure all cables in such a manner that they are not in the vicinity of movable parts, such
as e.g. the parking brake, gas/brake/coupling pedals, handle bars and seat tracks.
- Don’t place any cables in the vicinity of heat sources (e.g. near the heater ventilation), since
the insulation of the cables might get damaged and result in short circuits.
- Don’t short circuit any cables. This can result in damages to the vehicle and device.
- Never establish a power supply to other devices by removing the insulation of the device’s
power supply and connecting an additional cable. Otherwise, the maximum power rating of the
cable will be exceeded and there will be a danger of overheating.
- If you have to replace the fuse, only use an identical one with the same rating.
- The connected speakers have to be high-performance speakers with a minimum output of 40
W and an impedance ranging from 4 to 8 ohm. If you connect speakers with other output or
impedance ratings, the speakers may burn, smoke, or sustain other kinds of damage.
- When the device is turned on, a control signal adjoins the blue cable of the connection A5
(ISO plug A). You can connect this to the relay of the extendable vehicle antenna (max. 100
mA, 12 V=). If your vehicle has a wire antenna inside the windshield, connect the blue cable
A5 (ISO plug A) to the pre-amplifier of the antenna.
- If an external audio amplifier is connected to the device, the blue cable of connection A5 (ISO
plug A) may not be connected to the power supply of the amplifier. Likewise, you may not
connect it to the power supply of an active car antenna. This poses a risk of short circuits and
malfunctions.
- Insulate unused connection cables with insulating tape. The same applies to unused speaker
cables. Otherwise there is a risk of short circuits.
- Dirt or condensed moisture on the lens of the CD/DVD drive may impede and even prevent
the playback of data carriers.
- In general, the playback of self-burned data carriers is possible, but it depends on the used
software and the settings made with it, so that there may be problems during playback in
individual cases. You can receive further information from the manufacturer of your software.
- Additional CD data carriers can be played back just like audio CDs. It’s possible that CD-
R/CD-RW data carriers can’t be played back correctly if they were recorded by a device other
than an audio CD recorder.
- In addition, it may be the case that a data carrier (CD-R/CD-RW) recorded with an audio CD
recorder can’t be played back due to the conditional features, irregular formats, or soiling of
the data carriers.
- The information recorded on the data carrier (ID3TAG) is displayed by this device.
- After inserting a CD-RW data carrier, it takes a little longer for the playback to begin than with
regular CD or CD-R data carriers. Also read the guidelines on the sleeves of the CD-R/CD-
RW data carriers before you insert them.
- Do not turn on or off the product in short intervals. When turning the unit off, wait for at least
10 seconds prior to turning the unit on again. Do not operate the player with scratched,
bended or broken discs and when a disc is not loaded properly, do not force it into the player.
NOTE
- Please dispose empty batteries according the regulations in your country
- All On Screen Displays (OSD) and Pictures will be based on the English version.
- Design and Specifications may vary in the manual from the actual product in use.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bullit nav3500bt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info