Bedienungsanleitung Bury CC 9050 (Seite 34 von 34) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

607773

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

3534

Operation instructions

Switch-on:

Establishinga Bluetooth connection (pairing):

If the power supply of the hands-free car kit (HFCK) is connected properly, the HFCK is

activated after having started the ignition. The display is switched on and a short high sound is

audible. After the initialisation mask, the main menu is displayed and another deep sound

appears if no mobile phone has been connected automatically to the HFCK via Bluetooth. In

case of a successfully established connection, a long high sound appears.

If you wish to establish a Bluetooth connection for the first time, you have to activate the

Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search

for a device labelled "CC 9050…“. If several devices were identified, please select the HFCK

and enter the PIN number 1234. The Bluetooth connection (pairing) will then be established

between your mobile phone and the HFCK. The HFCK supports the profiles "hands-free

operation" and "A2DP". Please set your mobile phone accordingly or check whether these

profiles are supported.

If it is not possible to establish a connection, please check and update the software release

(firmware) of your mobile phone or of the HFCK. You will find an overview dealing with this

subject on the Internet at www.bury.com. In addition it is possible that you must delete all

devices connected to your mobile phone first in order to enable a correct identification of the

HFCK and a connection can be established. If you have queries regarding the menu navigation,

functions and operation of your mobile phone, please refer to the operating guidelines of your

mobile phone. Depending on the manufacturer and type, this can differ considerably between

phones.

The HFCK has a memory for the storage of the identification of up to 10 mobile phones. In case

an eleventh mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.

After the commissioning of the HFCK it automatically tries - "hands-free operation" profile - to

connect with a mobile telephone already saved.

12 3546

Disconnect a Bluetooth connection:

Menu navigation:

If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the

HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far

away from the vehicle while taking your mobile phone with you and thus leave the reception

radius of the HFCK.

Please note that the capacity of your mobile phone's storage battery can quickly decrease

when the Bluetooth function is active. If you do not want to use the Bluetooth function anymore,

e.g. if you leave the vehicle for a longer period, it is recommended to deactivate this function.

Please note that some of the functions/displays specified subsequently are only possible if they

are supported by the mobile phone!

The main menu is displayed after having switched on the HFCK. It informs you whether or not

your mobile telephone is connected via Bluetooth. Depending on the connection state, you can

call the main menu here by pressing key 5. The entry, marked with a bar can be selected by

again pressing key 5. The menu navigation can be interrupted with key 4.

- Language

-- English / German / Spanish (selection of the menu language)

- Service

-- Update (performing firmware updates of the hands-free car kit)

-- Colour

--- Primary colour (selection of the background colour)

---Text (selection of the text colour)

-- Software (reference to the current firmware version of the HFCK)

To install a firmware update you need a PC equipped with a Bluetooth interface (most suitably a

laptop). You can find up-to-date firmware versions and installation software for this HFCK on

the internet at www.bury.com

Functions while Bluetooth connection is inactive:

If no mobile telephone is connected, the notice 'disconnected' appears on the display.

(4) = Establishment of a connection with the mobile telephone connected last

(5) =Activation of the menu / calling up a menu item

(6) = Scrolling between the menu items

Other keys = no function

Functions while Bluetooth connection is active:

If a mobile telephone is connected to the HFCK, its BT identification name is displayed. The field

strength equally appears (the reception) as well as the capacity of the storage battery and the

volume level of the HFCK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bury CC 9050 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bury CC 9050

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info