Bedienungsanleitung Bury Motion Universal (Seite 15 von 19) (Englisch)

607767

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

10. Establishing a

Bluetooth

connection

If you wish to establish a

Bluetooth

connection between your mobile and the HFCK for the first time,

you have to activate the

Bluetooth

function of your mobile phone and search for

Bluetooth

devices. In

this case, search for a device labelled „BMU…“. If several devices were identified, please select the

BMU and enter the PIN number „1234“. The

Bluetooth

connection (pairing) will then be established

between your mobile phone and the HFCK. Next, press down on the ‚Pair‘ button in order to create the

connection with the HFCK.

In addition it is possible that you must delete all devices connected to your mobile phone first in

order to enable a correct identification of the HFCK and the establishment of a connection.

Note:

If the rechargeable battery of the mobile phone is low, it is sometimes not possible to X

establish a

Bluetooth

connection.

The HFCK has a memory for the storage of the identification of up to 8 mobile phones. In case

a ninth mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.

The

Bluetooth

connection is interrupted if you deactivate the

Bluetooth

function on your mobile

phone or you interrupt the supply of power to the BURY Motion Universal. In addition, the con-

nection is disconnected, if you move too far away from the vehicle while taking your mobile

phone with you and thus leave the reception radius of the HFCK.

Please note that the capacity of your mobile phone‘s storage battery can quickly decrease when

the

Bluetooth

function is active. If you do not want to use the

Bluetooth

function anymore, e.g. if

you leave the vehicle for a longer period, it is recommended to deactivate this function.

Note:

This function is only available if the multipoint function has been activated. X

Thanks to the Multipoint function, you can connect two mobile telephones simultaneously to BMU via

Bluetooth

. You can operate this function with the home button. The phone which is connected first

gets priority, this means that only its phone books, call lists and voice tags are uploaded and can be

retrieved from the HFCK memory.

This is the same situation as if only one mobile phone was connected to the HFCK. However, if the

secondary mobile receives a call then this call is also taken via the HFCK.

When the BURY Motion Universal is switched on, the device connects with the mobile phone which was

connected last. The prerequisite for this is that it is located in the vehicle, that the

Bluetooth

function

is activated and the connection identification to the HFCK is not deleted.

If both mobile phones happen to receive a call at the same time then the primary phone will get prior-

ity. The incoming call on the other mobile will be displayed to you after the first call has been answered

or rejected. Then the first call can be ended quickly and then the second can also be rejected (both of

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bury Motion Universal Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bury Motion Universal

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info