Bedienungsanleitung Bushnell Imageview 110832 (Seite 4 von 57) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

559520

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please

read these instructions and take time to familiarize yourelf with the different parts and features of the

product.

BINOCULAR INSTRUCTIONS

INSTALLING BATTERIES

emove battery cover and insert

batteries as directed in battery

compartment. Replace battery cover.

TURNING THE CAMERA ON

AND

OFF

Raise the LCD display by pulling

up on the sides of the display at the

finger indents (see fig.2). Press and

hold the “ON /OFF ” button until

power turns on, as indicated by the

red light on the back of the camera.

The LCD screen will turn on and

display the Bushnell logo, then

turn off to conserve battery life. If

you have installed new batteries,

View (Review/

Capture)

SNAP (Shutter Release)

TFT LCD Display

USB Port, SD Card Slot,

Power Indicator Light,

Remote Button Jack

5-Way Switch w/

Menu Button

Binocular Focus

ON/OFF (Power)

Display (On/Off)

TAKE A PHOTO

• Holding the Imageview as steadily as possible with both hands, confirm that the image

appears sharp on the LCD display. (If not, you are probably too close. Unlike the binocular

optics, the camera focus is preset and is designed only for distant subjects that are 30 feet or

more away from the camera). Lightly press the SNAP button to take the photo. The display will

let you review the photo for a few seconds after you take it. If the exposure or color is bad, try

adjusting the EV, Meter, and/or White Balance settings as described in the manual and reshoot.

REVIEWING AND DELETING PHOTOS

• Press the VIEW button to see a playback of your stored photos. Use the left/right arrow keys on the 5-way switch

to step through the photos. To erase a photo from memory, pressing the MENU button four times in a row will

delete it by: (1) Turning on the play menu, (2) Selecting DELETE, (3) Selecting DELETE ONE=OK, and (4)

Confirming you wish to delete the photo.

DOWNLOADING PHOTOS TO YOUR COMPUTER

• If you are using Windows 98, be sure to install the driver first from the CD-ROM as directed in “Software

Installation”. If you do not already have photo software you prefer to use, install Roxio® PhotoSuite 5 from the

CD. Connect the supplied USB cable between the Imageview and your computer. Open Windows Explorer.

Under “My Computer” the Imageview will appear as a new “Removable Disk”. Your photos are .jpg files inside

the folders found in this “Disk”. Open the folders, then select and drag (or copy/paste) the photo files to a folder

on your hard drive. You are then ready to open and work with the photos using PhotoSuite or the photo software

of your choice, and may then delete the old photos from the Imageview memory. After you finish downloading,

right click on the “Removable Disk” icon in Windows Explorer and select “Eject” before disconnecting the

Imageview. If you get an error message, use “Add/Remove Hardware” in the Windows Control Panel instead-it

will direct you how to “Unplug or Eject Hardware”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Imageview 110832 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info