Bedienungsanleitung Bushnell Onix 350 (Seite 22 von 28) (Englisch)

481954

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

e My Stuﬀ Menu

From the Hot Menu, press “+” or “-“ to see the “My Stuﬀ” menu (Fig. 39). is

menu lets you work with your personal waypoints, trails, map areas, etc that you

have already created. e “My Stuﬀ” menu items are:

• My Waypoints: Press OK to see a list of all the waypoints you have marked.

Select one and press OK to edit, delete or navigate to the waypoint. Or, press

the Right key to view the waypoint on the base map (cursor moves to the

waypoint)

• My Trails: A trail is a path or course that been started (by moving) or previously

completed and saved by the user. Press OK or the RIGHT key. e options here

are (Fig. 40:

Start New Trail: select this to begin a new trail, for example, from a parking

lot or other landmark to your camp.

Trail List-your previous trails (if any) are listed below “Start New Trail”.

Highlight a trail name and press OK to see these 4 options (Fig.

Navigate To: navigate a saved trail. is starts navigation through a

previously completed trail.

Reverse-press OK to navigate the selected trail from its endpoint to its start

(very useful to “go back” to a point of origin)

Edit Name: option to rename a previously saved trail. Especially useful if

you saved a trail with the “default” name.

Delete: deletes a previously saved trail from memory.

End & Save Trail

(Fig.

)

(only available after a New Trail has been started):

select this when you reach the end of a new trail, saving it in memory for later

recall. You will have the option of naming the trail so it is easy to ﬁnd in your

“My Trails” list. Note: this option will only be seen if you are already actively

navigating a trail you started.

• My Routes (same 5 options as listed above for “My Trails”)-a Route is the

most direct or shortest path between two points. “Routes” are more often used

for water based navigation (due to the reduced number of natural obstacles),

whereas “trails” are more useful on land.

• My Map Areas - options here to navigate towards a previously created map

area, and to manage them.

• My Photos -you have the options here to navigate towards a stored satellite

photo or topo map, and to manage them (photos & maps are downloaded, not

user created).

SafeTrack™ Battery Conservation Mode

SafeTrack is a Bushnell exclusive feature that extends and conserves battery power,

without the wait to re-establish GPS satellite contact after a full power down.

When you are in SafeTrack mode, the display screen will shut oﬀ, and the status

LED will blink green. Intermittent satellite contact is maintained, so you will

quickly be able to check your current location or progress. To enter SafeTrack

mode, press and hold the HOT button, or select SafeTrack from the Hot Menu.

USING YOUR ONIX350 GPS RECEIVER : My Stuff Menu / SafeTrack

™

Fig 41.

My Trails-

Options after Selecting a

saved Trail

Fig 42.

My Trails-

End & Save Trail

Fig 40.

My Trails Options

Fig 39.

My Stuff Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 350 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info