Bedienungsanleitung Cadac 202P1 (Seite 2 von 7) (Englisch)

684160

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

CAUTION

Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to

avoid endangering your life. If still more gas appliances and/or occupants using gas are added to the space, additional ventilation

must be provided.

IMPORTANT

Read these instructions carefully so as to familiarise yourself with the appliance before  ting the appliance to a gas cylinder.

Retain these instructions for future reference.

1. General

• This is an economic gas appliance designed for an optimal cooking experience using environment friendly LP gas.

• The appliance conforms to BS EN 484: 1998 and SANS 1539:2012

• Note that  gures in this user manual are shown for visual purposes only and may differ to your appliance.

• Please read all the instructions and warnings on the appliance before use.

• It is important that all gas connections have been correctly connected to prevent any gas leaks.

• Do not use a leaking, damaged or malfunctioning appliance.

• This appliance must only be used with an approved hose and regulator. (A 2.8kPa hose and regulator supplied only in South Africa)

• Ensure that the appliance is used in a well-ventilated area.

• Handle the appliance with care, do not drop it.

• When using a pot, the minimum recommended pot size is 150mm and maximum pot size is 300mm.

• The gas cylinder is to be used in an upright position only.

• Read the instructions before using the appliance.

• Use Outdoors Only

2. Safety information

These instructions are for your safety and to help you avoid risk of injury

and/or damage. All warranties will become void if you do not follow these

instructions.

• The hose and seal on the regulator must be checked for wear or damage

before every use and before connecting to the gas cylinder.

• In the event of light back (where the  ame burns back and ignites at the

jet) immediately turn off the gas supply by  rst closing the control valve on

the gas cylinder and then the appliance valve. After the  ame is

extinguished remove the regulator and check the condition of its seal,

replace the seal if in doubt. Re-light the appliance. Should the  ame

persistently light back again return the product to your authorised CADAC

repair agent.

• Ensure the appliance is used away from  ammable materials. Minimum

safe distances; above the appliance 1.2 m, at the rear and sides 600mm.

• Do not use an appliance that is leaking, damaged or which does not

operate properly.

• Ensure that the gas cylinder is  tted or changed in a well-ventilated

location, preferably outdoors, away from any sources of ignition, such as

naked  ames and away from other people.

• Keep gas cylinders away from heat and  ame. Do not place on a stove or

any other hot surface.

• Ensure that the assembled product is stable and does not rock.

• Never leave the appliance unattended when lit.

• If there is a leak on your appliance (smell of gas), turn off the gas supply,

 rstly at the gas cylinder and then on your appliance by turning the

respective knobs fully clockwise. Take them outside immediately into a

well-ventilated  ame-free location where the leak may be detected and

stopped.

• This appliance consumes oxygen and needs ventilation for optimum

performance and for safety of those in close proximity.

• Room ventilation is important for the ef cient performance of the

appliance and for the safety of the occupants in the room.

• The room where this appliance is used should have a window or a door that can be opened or partially open during use. If there is no

window or door available for room ventilation, extra ventilation must be installed for your sefety.

• If you wish to check for leaks on your appliance, do it outside. Do not try to detect leaks using a  ame, use soapy water.

The correct way is to smear the joints with soapy water. If bubbles form then there is a gas leak. Immediately turn off the gas supply

 rst by closing the control valve on the gas cylinder and then the appliance valve, check that all the connections are properly  tted.

Re-check with soapy water. If a gas leak persists return the product to your CADAC dealer for inspection / repair.

• Do not modify the appliance. Do not use it for anything for which it has

not been designed.

• During use, parts of the appliance will become hot (particularly the burner) Avoid touching hot parts with bare hands. The use of

gloves is recommended.

• Keep young children away from the appliance at all times.

• Do not twist or pinch the hose.

• Do not move the appliance during use.

• Do not use the appliance without the Potstands being in place and properly located.

• Turn off the gas supply at the gas container after use.

• Do not modify the appliance, any modi cation may be dangerous.

Fig. 1

Seal

Cylinder Valve

Fit hose

clamp

here

RegulatorHose

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadac 202P1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadac 202P1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info