Bedienungsanleitung Cadac 8309 - Skottelbraai (Seite 9 von 9) (Englisch)

684182

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

9. GENERAL MAINTENANCE

Ÿ This appliance does not require scheduled maintenance.

Replacing a Blocked Jet:

Ÿ Your appliance is fitted with a specific size jet (O) to regulate the correct amount of gas.

Ÿ Should the hole in the Jet (O) become blocked, this may result in a small flame or no

flame at all. Do not attempt to clean the Jet (O) with a pin or other such device as this

may damage the orifice, which could make the appliance unsafe.

Ÿ To replace the Jet (O):. Unscrew the 3 screws on the bottom housing cover and remove

cover.

Ÿ Remove Valve base plate assembly by unscrewing the six self-tapping screws fixing it to the

Tripod housing (J) and subsequently remove the Valve (M) from the Housing simply by

sliding it out.

Ÿ The Jet (O) will now be accessible at the top of the Valve (M).

Ÿ Unscrew the Jet (O) from the Valve (M) using a suitable spanner.

Ÿ Do not use pliers on the jet as this may damage the jet, making it unusable or

impossible to remove. Screw the new jet into the valve. Do not over-tighten as this may

damage the jet.

Ÿ Re-fit the valve and baseplate in the reverse order of assembly. When re-fitting the

valve, ensure that the valve spindle aligns with slot in the Tripod housing.

Ÿ Reconnect the gas supply as described in the Assembly Instructions

Replacing the Hose:

Ÿ The fitting of a hose is described in Section 6 - Assembly of the Appliance.

10. CLEANING

Ÿ Note: For Parts Reference (See Fig.2)

For Skottel Braai

Ÿ After cooking, leave the burner on low with soapy water in the cooking dish to soften cooking residue. When satisfied that e xcess fat has

been removed, wash the Skottel BBQ (A) in warm water using a suitable non-abrasive detergent. Do not use sharp metal objects or

abrasive detergents on the vitreous enamel coated surface.

Ÿ After cleaning recondition the surface with a light wipe of oil.

Ÿ Remove the fat from the moat of the Burner Pan (F), wash it with warm water using a suitable non-abrasive detergent. Do not use sharp

metal objects or abrasive detergents.

For Grill2Braai & Paella Pan

Ÿ The grill plate is coated with a tough durable non-stick coating that has been used with great success on some of the best cookware in

the world. Nevertheless, taking care of it can help you to enjoy extra years of healthy, easy, non-stick cooking.

Ÿ Use only low or medium heat settings to help retain the valuable nutrients in the food and maintain the non-stick surface.

Ÿ Whilst the non-stick coating is very durable, it can easily be damaged by the use of metal cooking utensils. It is therefore recommended

that only plastic or wooden utensils be used when cooking.

Ÿ Do not overheat the grill plate and always add a little cooking oil to the surface before use.

Ÿ Always allow the grill plate to cool before immersing it in water.

Ÿ The use of abrasive detergents is not recommended, as this will permanently damage the non-stick surface.

Ÿ After cleaning recondition the surface with a light wipe of oil.

Ÿ Remove the fat from the moat of the Fat Pan.

Ÿ Note: For stubborn stains, oven cleaner may be used.

11. STORING AND CARRYING

Ÿ Always allow the unit to cool down before packing any part into its bag.

Ÿ Always store your CADAC Braai in the supplied bags, in a dry environment, preferably off the ground. This is especially important

for the Burner pan stored in the Main bag so as to prevent the ingress of dirt or insects that may affect the gas flow.

Ÿ Should the appliance operate abnormally after storage and all checks referred to in Sections 4 & 7 have not isolated any problem, the

Venturi may be blocked. A blocked Venturi would be indicated by a weaker yellowish flame or no flame at all in extreme cases. Under

these circumstances it will be necessary to remove the Burner (G) as described under Section 10 - General Maintenance, and to check

and thoroughly clean out any foreign matter which may have gathered in the Venturi.

12. RETURNING THE APPLIANCE FOR REPAIR OR SERVICE

Ÿ Do not modify the appliance, as this could be dangerous.

Ÿ If you cannot rectify a fault by following these instructions, contact your local CADAC distributor for details on how to return the product

for attention.

Ÿ Your CADAC Appliance is guaranteed by CADAC for a period of 2 years against factory fault.

13. SPARES AND ACCESSORIES

Ÿ Always use genuine CADAC spares as they have been designed to give optimum performance.

Fig. 9

SPARES

740-SP030

Jet No. 85 (I3B/P(30) & I3+(28-30/37))

740-SP015

Jet No. 74 (I3B/P(50)

8309-SP001

Pot/Paella Stand

8309-SP003

Burner Assembly

ACCESSORIES

346-10

Dual Power Pak

349

Vertical EN417 Regulator Assembly

98368

Pizza Stone

8309-SP006

Burner Pan Assembly

8154-6

1/4” BSP LH tailpiece and Nut

8309-SP002

Skottel

8309-100

Skottel

8309-SP005

8910-100

Grill2Braai

Pot Stand Rubber Feet

740-SP028

Jet No. 81 (I3B/P(37)

5758

Paella Pan 47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadac 8309 - Skottelbraai Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadac 8309 - Skottelbraai

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info