Bedienungsanleitung Caliber mcc 100 (Seite 2 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

165945

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

SPECIFICATIONS

Power Supply Main Unit DC 13.8 Volts. Negative Ground

Current consumption 10A MAX

Maximum Output Power 35W X 4

Unit Dimensions 178(W) x 160(D) x 50(H)

FM SECTION

Frequency Range 87.5MHz - 108MHz

AM SECTION

Frequency Range 522KHz - 1620KHz

GB 4

USER MANUAL

seconds each time. During the memory station performing, press 1-6 digital buttons

to select and stop scanning function.

9.RESET BUTTON

Press it to rehabilitate the state when the program are distorted.

10,11. SOUND MODE AND ADJUSTMENT BUTTONS

Press SEL button repeatedly to select the one mode of BASS,TRE, BAL, FADER and VOL

(defaulted), and then press + or - button to adjust level of selected mode.

12.LCD (LIQUID CRYSTAL DISPLAY)

13.MODE

Press it to change into TAPE PLAY mode from RADIO mode.

14.TA function [TRAFFIC ANNOUNCEMENT] BUTTON

When pressed short, it is activated as TA mode on or off.

When TA mode is on and traffic announcement is transmitted:

1).When the unit is in TAPE mode, it will switch to radio mode temporarily.

2).Temporary switch over to an EON linked station when EON detects a traffic announcement

on the other program.

3).If the volume level was under the threshold point, it will be raised to the threshold point. If

the volume level was set to more than the threshold point (min.TA volume level), it will be set

to the last level.

When pressed long,TA SEEK mode on or off, and TPST ON/OFF will be displayed on LCD.

When the newly tuned station does not receive TP information for 5 seconds, the radio retunes

to the next station which has not got the same station(PI) as the last station, but does have the

TP information.

In TA seek mode, the current station can be changed to a completely different station because

the unit searches TP station when the field strength of the current station is very weak, or when

the current station has no TP signal.

15.TUNE UP OR DOWN BUTTONS

In RADIO mode, press ^ or v button shortly and repeatedly to manually tune up or down for

the desired radio station. Press ^ or v button for more than 2 seconds to automatically tune up or

down for the radio station of a strong signal.

16.EJECT KEY

At TAPE mode, push this key to stop tape playing and eject the tape from the cassette compartment.

17.CASSETTE COMPARTMENT

18. PANEL SIGNAL LAMP

This lamp flashes when the frontpanel of the unit is removed

GB 3

USER MANUAL

B. ANTENNA PLUG

C. MEMORY B+ PINK

D. BLACK( GND)

E. RED( B+)

F. FRONT

G. REAR

ISO WIRING CONNECTION

H. FRONT GREY

I. GREEN

J. GREEN/WHITE

K. LEFT SP

L. RIGHT SP

M. GREY/WHITE

N. BROWN

O. BLUE

P. BLUE/WHITE

Q. BROWN/WHITE

R. YELLOW AUTO ANT

S. RCA LINE OUT

T. RED R

U. WHITE L

V. FUSE 10A

W. FUSE 1A

MCC 100manual 22-06-2004 08:46 Pagina 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber mcc 100 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info