497376
3
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
1. Before finally installing the unit, connect the wiring temporarily and
make sure it is all connected up properly and the unit and system work
properly.
2. Use only the parts included with the unit to ensure proper installation.
The use of un-authorized parts can cause mal functions.
3. Consult with your nearest dealer if install-ation requires the drilling of
holes or other modifications of the vehicle.
4. Install the unit where it does not get in the driver's way and cannot
injure the passenger if there is a sudden stop, like an emergency stop.
5. If installation angle exceeds 30° from horizontal, the unit might not give
its optimum performance.
6. Avoid installing the unit where it would be subject to high temperature,
such as from direct sunlight, or from hot air, from heater, or where it
would be subject to dust dirt or excessive vibration.
After inserting the half sleeve into the dashboard, select the appropriate
tab according to the thickness of the dashboard material and bend them
inwards to secure the holder in place.
Installation using the screw holes on the side of
the unit
Select a position where the screw holes of the bracket and the screw
holes of the main unit become aligned (are fitted) and tighten the screws
at 2 places on each side.
Screw
Screw
Factory radio
mounting
bracket
Hook
Hook
Installation
INSTALLATION CAUTION
E - 3
Installation with the half sleeve
182
111
Dashboard
Half Sleeve
Screw
Attach the trim ring
Trim ring
Dashboard or
console
The outer trim ring, and half-sleeve are not used
for this installation.
The mounting box, metal half-sleeve, hook &
screws are not included in the packing.
NOTE
Attached the Front Panel
1
2
To attach the front panel back to the
unit chassis, please insert the right side
of the panel in the chassis until it is
correctly engaged. Press the left side
of the panel until the mechanism locks
it into place.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Caliber RDD843BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Caliber RDD843BT

Caliber RDD843BT Kurzanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info