Bedienungsanleitung Cambridge Audio Air 100 V2 (Seite 4 von 13) (Englisch)

656765

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Positioning

Choose the installation location carefully. Avoid placing it in direct

sunlight or close to a source of heat. No naked ame sources,

such as lighted candles, should be placed on the unit. Also avoid

locations subject to vibration and excessive dust, cold or moisture.

The unit can be used in a moderate climate.

This unit must be installed on a sturdy, level surface. Do not place

in a sealed area such as a bookcase or in a cabinet. Do not place

the unit on an unstable surface or shelf. The unit may fall, causing

serious injury to a child or adult as well as serious damage to the

product. Do not place other equipment on top of the unit.

Due to stray magnetic elds, turntables or CRT TVs should not be

located nearby due to possible interference.

Electronic audio components have a running in period of around

a week (if used several hours per day). This will allow the new

components to settle down and the sonic properties will improve

over this time.

Power sources

The unit should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of

power-supply to your home, consult your product dealer or local

power company.

This unit can be left in Standby mode when not in use and will draw

<0.5W in this state. To turn the unit o, unplug it from the mains

socket.

Overloading

Do not overload wall outlets or extension cords as this can result in a

risk of re or electric shock. Overloaded AC outlets, extension cords,

frayed power cords, damaged or cracked wire insulation and broken

plugs are dangerous. They may result in a shock or re hazard.

Be sure to insert each power cord securely. To prevent hum and

noise, do not bundle the interconnect leads with the power cord or

speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use

any cleaning uids containing alcohol, ammonia or abrasives. Do

not spray an aerosol at or near the unit.

Battery disposal

Please dispose of any discharged batteries according to local

environmental/electronic waste disposal guidelines.

Connections

Before making any connections, make sure all power is turned o

and only use suitable interconnects.

Servicing

These units are not user serviceable. Never attempt to repair,

disassemble or reconstruct the unit if there seems to be a problem.

A serious electric shock could result if this precautionary measure

is ignored. In the event of a problem or failure, please contact your

dealer.

This unit is intended to be used in conjunction with the Wi-Fi Dongle

please observe the statements below when using with Wi-Fi.

Wi-Fi information

FCC Statement

Air 100

FCC ID: YKBMA101-013 IC ID: 9095A-MA101013

Air 200

FCC ID: YKBMA201-014 IC ID: 9095A-MA201014

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Cambridge Audio, of Gallery Court, Hankey Place, London SE1

4BB, declare under our sole responsibility that this device,

Air 100/200 with Wi-Fi module

to which this declaration relates, complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may

cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The device shall be used in such a manner that the potential for

human contact during normal operation is minimized.

When connecting an external antenna to the device, the antenna

shall be placed in such a manner to minimize the potential for

human contact during normal operation. This transmitter must not

be co-located or operating in conjunction with any other antenna or

transmitter.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is

encouraged to try and correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit dierent from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved

by the party responsible for compliance could void the user's

authority to operate this equipment.

IMPORTANT Note:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20cm between

the radiator and your body.

This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

2.4GHz operation of this product in the USA is rmware-limited to

channels 1 through 11.

Cambridge Audio Air 100 V2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Air 100 V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info