Bedienungsanleitung Cambridge Audio Azur 351R (Seite 6 von 22) (Englisch)

497534

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Standby/On

Switches the unit between Standby mode (indicated by a dim power LED) and

On (indicated by a bright power LED). Standby is an eco-friendly <0.5W low

power mode. The unit may be left in Standby mode when not in use.

Note: This product has APD (Auto Power Down) enabled as default. After a

period of inactivity, the product will automatically switch to Standby.

Phones

Allows for the connection of stereo headphones with a 6.35mm/¼" Jack

plug. Headphones with an impedance of between 32 and 600 ohms are

recommended.

Note: Plugging in headphones will automatically mute the main output and

select a 2-channel stereo down-mix to be created for headphone use.

Tuning +/-

Used to tune FM frequencies and skip presets for the built-in FM Tuner.

Mode/Store

Press to cycle between Tuner modes. Press and hold for storing presets (refer

to the 'Operating Instructions' of this manual for more information).

Display

Displays the status of the unit.

FM tuner

Press to select the built-in FM tuner.

BD/DVD

Press to select the source equipment connected to the BD/DVD input.

CD/Video 1

Press to select the source equipment connected to the CD/Video 1 Input.

Video 2

Press to select the source equipment connected to the Video 2 input.

Aux/TV

Press to select the source equipment connected to the Aux input.

With ARC enabled (see later section), press again to select Audio Return

Channel from a suitable TV.

Analogue stereo direct

Press to listen directly to the analogue inputs for the current source directly

with no analogue to digital conversion or DSP processing for highest possible

stereo sound quality.

Note: The 351R remembers the audio and video input type and processing

mode for each individual source input. These are recalled each time a source

is selected.

Audio input type

Press this button to select between analogue, digital (optical/coaxial) or HDMI

input types as the source of the audio for the currently selected source input.

The choices available depend on the inputs that have been assigned to that

source, see later section.

Stereo modes

Press to listen to a source in either digitally processed stereo or stereo and

sub modes.

Surround modes

Press to select Dolby Digital or DTS surround modes (with suitably encoded

digital source material), or various Pro Logic II or DTS Neo:6 modes for matrix

encoded analogue or digital material.

Info

Press to re-display the current decoding mode.

Mute

Press to mute the sound from the main outputs of the 351R. Press again to

cancel mute.

Note: Selecting a new source always cancels mute.

Infrared sensor

Receives IR commands from the supplied remote control. A clear, unobstructed

line of sight between the remote control and the sensor is required.

Volume

Use to increase/decrease the level of the sound from the outputs of the

351R.

Mic input

Used for the CAMCAS auto setup. Use the supplied microphone only!

Front panel connections

1 3 4

7 11

12 13 14 15 16

8 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 351R Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 351R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info