Bedienungsanleitung Cambridge Audio Azur 351R (Seite 18 von 22) (Englisch)

497534

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Operating instructions continued

Using the Tuner

y O

1. Press the FM Tuner button on the front panel or remote control to select

Tuner mode.

2. Press the Mode/Store button on the front panel (or Mode button on the

remote control) to select automatic tuning, manual tuning or preset mode.

3. Press the Tuning + and Tuning - buttons (or the  and  arrow buttons on

the remote) to select the station you want to listen to.

In automatic tuning mode the unit scans to the next strong station. In manual

tuning mode the user can step manually through the frequencies. In preset

mode the unit cycles through the presets only.

Two FM modes are available, stereo and mono - Press the Stereo Mono

button on the remote to alternate between Stereo mode and Mono mode. If

the Display button is pressed, the RDS station names of FM stations will be

displayed if available.

Storing stations

1. Tune in a station you wish to store as explained previously.

2. Press and hold the Mode/Store button (or use the Store button on the

remote) for 5 seconds.

3. Use the Tuning+/- buttons to select a preset station number (1-15). The

station number will be displayed on the screen.

4. Press the Mode/Store button (or use the Store button on the remote) to

memorise the frequency.

Radio Data Systems (RDS)

RDS is a method for the transmission of additional information from local

radio stations. RDS will only work if the local broadcasting stations have RDS

transmission and the signal is strong enough.

Press the Info button on the remote and go through the displayed functions.

There are functions for PS, PTY, CT and RT:

PS (Station Name) - current station name will be shown

PTY (Program Type) - current name type of the program will be shown

CT (Clock/Time) - current time from Radio Station will be displayed.

Note: Clock/Time will be only transmitted from local radio station once a

minute. If the Clock - Time is not available the message "NO CT" will appear

briey on the display.

RT (Radiotext) - Some Text messages will be shown.

Lip sync

The 351R can if required apply a small delay to the audio playback to

resynchronise it to any video playback which appears to be behind the audio

in time.

This can sometimes happen if the video is slightly delayed by a player or TV

performing a lot of video processing.

Pressing the Lip Sync button on the remote will bring up

the current Lip Sync value on the 351Rs main display and

allow adjustments in 10mS (10 thousandths of a second)

increments.

Setting the Lip sync value to 0 causes Lip Sync delay to be turned off.

Note: The Lip sync value is stored and recalled separately for each source.

Audio Return Channel

The 351R supports an Audio Return Channel (ARC) function from TVs that

also support this function (which must feature an HDMI1.4 input and have

actually implemented the ARC feature, see your TVs manual).

ARC allows a TV to send audio back down its incoming HDMI lead to the

351Rs HDMI output socket.

This function allows the 351R to play back the audio from a TVs built-in

terrestrial cable or satellite tuner whilst you watch it's picture.

To enable the use of ARC, press the OSD button on the remote and navigate

to the 'Audio In. Select' menu, select the HDMI TV– ARC and use the /

buttons to select the Enabled setting.

Using ARC

ARC can be started in one of two ways. If your TV supports it there may be a

menu item to start ARC on your TV.

Your TV then sends commands to the 351R which cause it to start an ARC

session and 'TV-ARC' will appear on the front panel display automatically.

Some TVs may also start an ARC session whenever you select the in-built

tuner and stop when you select another source.

Note: On many TVs their CEC/HDMI Link (which is often renamed as Vieralink

or AnyNet etc.) must be turned on for ARC to function

Alternatively you can start ARC by pressing the Aux/TV button twice on the

351R (as long as TV-ARC has been enabled in the 351Rs OSD as above).

The rst press selects Aux/TV, the second selects ARC and 'TV-ARC' appears

on the front panel display. The 351R will then send commands to the TV over

HDMI to try to start an ARC session.

To nish ARC simply disengage it on your TV or press a different source button

on the 351R.

azur 351R

Audio In. Select

Tone/Sub Config.

Speaker Config.

Speaker Distance

Speaker Level

Speaker Xover

Auto Setup

Dolby/DTS Setup

OSD Setup

BD/DVD

VIDEO

AUX

HDMI TV ARC

Quit : [I/O] Enter : [ENTER]

HDMI <>

Enabled <>

y O

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 351R Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 351R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info