Bedienungsanleitung Cambridge Audio Azur 751R V2 (Seite 20 von 40) (Englisch)

656755

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The 751R V2 has 6 HDMI inputs (one of which is on the front) and two

outputs. HDMI is a fully digital audio/video system for picture and audio in

digital format for best possible picture quality.

HDMI outputs on Blu-ray, DVD players and Set-top boxes also often support

higher resolution formats including progressive scan types. Consult both your

HDMI source and TV manuals for details, it is often possible to select from

various options, you will want to select the highest quality output that both

your source and TV are compatible with.

From Blu-ray players, HDMI can also carry the latest Dolby Digital Plus and

True-HD formats as well as DTS-HD High Resolution and Master Audio.

Ensure that the HDMI output of your player has been set to 'Bitstream' or

'Raw' to pass the formats to the 751R V2 for decoding. Also some Blu-ray

players feature settings to allow down conversion of Dolby Digital Plus etc. to

backwards compatible Dolby Digital 5.1 for older AV receivers which do not

support these formats.

Ensure any such settings are disabled to allow our 751R V2 access to all the

latest formats. For all the above reasons HDMI is the preferred connection

method for both Audio and Video.

The 751R V2 can however also accept Composite, S-Video and Component

video for sources without HDMI outputs and automatically transcode and

scale this video to the HDMI output. Each of the HDMI and Component inputs

are freely assignable in the OSD to any source. The Composite and S-Video

inputs are physically xed.

The default setup is as below.

Highlight each HDMI and Component input in turn if you wish to assign it to

a different source (with the Left and Right arrows).

HDMI/Component Assign

HDMI 1 :

HDMI 2 :

HDMI 3 :

HDMI 4 :

Component 1 :

HDMI Out :

Return I/O

BD/DVD

VIDEO 1

VIDEO 2

Recorder 1

BD/DVD

VIDEO 1

VIDEO 2

A+B

Note: The rst four sources are Assigned both an HDMI and a Component

input.

This may seem strange but this just means that these sources have not only

their own HDMI connections but their own Component connections and the

physically assigned S-Video and Composite Video connections all available

to them.

This is useful because Zone 2 uses the analogue video inputs only. Thus

if you are using Zone 2 you will probably want a source to be assigned an

HDMI for viewing in the main room and plus perhaps a component video

connection for viewing in Zone 2. What video input you select to view when

you select each source in the main room is determined by the Video Input

Select menu explained next.

Navigate to the 'Video Input Select' menu.

For each source the currently selected video input type will be shown. This

menu allows you to choose which of the possible video connections that

each source has you actually wish to use, i.e. if your games console has only

an S-Video output and is connected to the VIDEO1 source, you would select

VIDEO1 and then change it from HDMI 2 to S-Video.

For the main room the 751R V2 automatically transcodes any analogue

video sources selected to HDMI using the Scaler settings as described later.

Video Input Select

BD/DVD :

VIDEO 1 :

VIDEO 2 :

Recorder 1 :

Aux :

CD :

7.1 Direct :

USB :

VIDEO 3 :

Return I/O

HDMI 1

HDMI 2

HDMI 3

HDMI 4

N/A

HDMI

Note: Assigning a HDMI input to a source automatically selects Bypassing

as it is not possible to scale a HDMI source.

Assigning video inputs

The next step is to select each source input in turn on the 751R V2 and tell

the unit:

• The type of audio connection you want to use for that source (Analogue,

Digital or HDMI).

• The processing mode for that source.

The 751R V2 remembers these settings individually for every source input

and automatically recalls them as and when you change source input.

Audio connection type

Select the 'Audio Input Select' menu. Highlight each source in turn and select

either analogue, digital or HDMI input types (use the Left and Right arrows):

Audio Input Select

BD/DVD :

VIDEO 1 :

VIDEO 2 :

Recorder 1 :

Aux :

CD :

VIDEO 3 :

Return I/O

HDMI 1

HDMI 2

HDMI 3

HDMI 4

Analog

The options shown will be Analogue, Digital and HDMI if that source has been

assigned an HDMI input for video as above.

Analogue inputs will require a stereo phono/RCA to phono/RCA cable

connection to the 751R V2. Digital inputs will require either a 75ohm

digital type phono/RCA to phono/RCA co-axial cable (S/P DIF) or an optical

bre cable (TOSLINK). The 751R V2 will automatically use whichever is

connected. Do not make connections to both the Optical and Co-axial inputs

for a source.

Once you have set the audio types exit the OSD to save.

This setting can also be changed at any time without using the OSD by

pressing the Audio Input Type button on the front panel or remote, this will

then cycle between analogue, digital or HDMI input types where available

for the currently selected source, as usual they will then be remembered the

next time you return to that source.

Source setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 751R V2 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 751R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info