Bedienungsanleitung Cambridge Audio Azur 751R V2 (Seite 37 von 40) (Englisch)

656755

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

751R V2azur

ENGLISH

The 751R V2 feature automatic power down and will by default shut down if

no audio playback has been detected for 30 minutes.

This feature can be enabled or disabled in the Advanced Audio Setup menu,

select the Auto Power Down item and press the ◄ or ► buttons on the

remote to change.

Advanced Audio Setup

Multi Ch.Out :

HDMI Bypass :

TV ARC(HDMIA) :

Auto Power Down :

Pre Out

Normal

Enable

Return I/O

HDMI preview

The 751R V2 feature a HDMI preview that can be used to preview connected

HDMI source devices.

When watching a HDMI video and any other HDMI port having video input,

you can press the HDMI Preview button on the remote control and use the

Vol

and Vol buttons then press the Enter button to choose the HDMI

port you wish to watch. You can also use the HDMI Preview button on the

front panel of the unit.

Note: The greyed out boxes represent HDMI inputs with no active connections.

Custom installation (C.I.) use

An IR Emitter Input is provided that allows

modulated IR remote control commands to be

received electrically by the unit. An IR receiver

input and Control Bus connections, similarly allows

un-modulated commands to be received. An RS232

port is also featured which allows the 751R V2 to be controlled by C.I.

systems.

In addition the unit features 'direct' IR/Control codes as well as toggle codes

for some features to simplify programming custom installation systems.

Special direct On/Off and Mute On/Off commands can be accessed on the

supplied remote control for teaching into C.I. systems as follows:

1. Press and hold the Standby/On button on the remote control. The remote

rst generates it's standby (toggle) command. Keep the button held down,

after 12 seconds an AV receiver "On" command will be generated. If the

button is kept held down for a further 12 seconds, an AV receiver "Off"

command is generated.

Repeat this procedure with the Mute and Stereo/Mono buttons to send On/

Off commands. The Tuner AM/FM button also provides unique FM and AM

commands to allow switching to a specic band.

A full IR code table and RS232 protocol for this product is available on the

Cambridge Audio website at www.cambridge-audio.com.

Auto power down

RS232C

The 751R V2 has a function that preserves the preset memory and other

settings. In the event of a power failure, or if the power cord of the unit is

disconnected from the mains outlet, the back-up memory will preserve the

preset memory.

If it is desired to reset all settings to their factory defaults (or in the unlikely

event that the unit locks up due to an electrical discharge etc), with the unit

on (out of Standby) press and hold the BD/DVD and Analogue Stereo Direct

buttons on the front panel at the same time for three seconds.

"RESET" will appear briey on the front panel display and all settings will be

erased.

Reset/Back-up memory

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 751R V2 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 751R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info