Bedienungsanleitung Cambridge Audio Azur 840E (Seite 14 von 16) (Englisch)

763861

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Connections to the 840E Incognito Ready / A-BUS Ready outputs are

made by Cat-5 cable (terminated with an RJ45 jack plug). The RJ45 plug

must be wired to the EIA/TIA 568A wiring standard:

To allow control of your source equipment from the remote rooms an IR

emitter (IR10) is plugged into one of the IR outputs on the rear of the

unit and then attached over the IR window of the source unit.

Alternatively, on our own products that feature IR emitter Inputs, a mini-

jack to mini-jack lead can be used. Commands received by the keypads

can now be sent back to the source equipment via the 840E.

It is then possible to control the source equipment from the remote

rooms by using the source equipment's own remote controls or through

a learning remote. The Incognito LR10 Learning Remote can fully control

the keypads, “learn” the source's remote control codes (including those

from other manufacturers) and change source input on the 840E etc.

On the front panel display of the 840E the extra multi-room zones are

indicated by a circle outline next to the input source (see Fig. 1). When

listening to the same source, the circle outline and solid circle overlap

(see Fig. 2).

Fig. 1 - One or both keypads are listening to a different source (Input 2)

to the amplifier (Input 1).

Fig. 2 - One or both keypads are listening to the same source (Input 2)

as the amplifier (Input 2).

For further details on the Incognito multi-room system please contact

your local Cambridge Audio dealer or visit: www.cambridge-audio.com

65 432178

Plug view from

contact end

34 567821

View into

socket

Gather pairs, trim

and insert into

RJ45 plug

Crimp wires

securely in place

Wire colours:

1. Green/White

2. Green

3. Orange/White

4. Blue

5. Blue/White

6. Orange

7. Brown/White

8. Brown

Mode

Volume

Mode

Volume

The 840E features Incognito Ready/A-

BUS Ready outputs, allowing multi-room

capability. One or two amplified keypads

can be plugged into the 840E (using

Cat5/5e cable and RJ45 plugs) to provide

multi-room audio in one or two secondary

rooms or zones. The keypads are powered by an external PSU (also

required) through the Cat5/5e cables and no mains connection is

required in the secondary rooms.

The 840E is Incognito Ready Type II, which means the keypads can

operate independently of the amplifier in terms of volume/bass/treble

etc, be independently turned on and off, and can also listen to a

different source from that which is currently selected on the amplifier.

However, both keypads can only listen to the same source.

A-BUS is a standard that allows compatibility between different

manufacturers equipment, so A-BUS compatible keypads from other

manufacturers can also be used. If used with our own Incognito KP10

keypads, there are some extra features such as the ability to change

source on the 840E from the keypad (EU model shown here):

Multi-room connections

Order of selection:

1. Input 1

2. Input 2

3. Input 3

4. Input 4

5. Input 5

6. Input 6 (Tape)

IR1

IR2

IR3

IR4

Keypad 1

Keypad 2

Multi-Room

PSU

International Patent Pending

LeisureTech Electronics Pty Ltd

GND

Conforms to ANSI/UL STD 60065

7th Edition 2003 Rev 2006/03/20

Certified to CAN/CSA STD C22.2

No. 60065-03

3098092

IR1

IR2

IR3

IR4

Keypad 1

Keypad 2

Multi-Room

IR Emitter

Trig ger

In Out/Thru In Out

LeftRight

Rec Out 2

Sub Out

Rec Out 1Rec InInput 7Input 6Input 5Input 4Input 3Input 2Input 1

Rec Out 2 Rec Out 1 Rec In Input 7 Input 6 Input 5 Input 4 Input 3 Input 2 Input 1

(Unbalanced) (Unbalanced)

Pre Out

Pre Out LeftRight

Balanced Pre Out

LeftRight

RS232C

Control Bus

PSU

International Patent Pending

LeisureTech Electronics Pty Ltd

GND

Power AC

On Off

Power

azur 840E Pre-Amplifier

Power Rating: 230V AC ~ 50Hz

Max Power Consumption: 36W

Designed in London, England

Flat / 200Hz L.P.

Manufactured

in an ISO9001

approved facility This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation.

Input 2 Balanced Audio

Balanced

Unbalanced

Balanced

Unbalanced

Input 1 Balanced Audio

Input 1

Input 2

GND

CAUTION

Risk of electric

shock.

Do not open.

AVIS

Risque de choc

electrique.

Ne pas ouvrir.

ACHTUNG

Vorm öffnen

des gerätes.

Netzstecker ziehen.

www.cambridge-audio.com

Standby / On Stop

Play

Pause

Open

SelectMenu

Skip

Scan

azur 840C

Upsampling Compact Disc Player

PROGRAM

PS5

LR10

Cat5/5e (up to 30m / 100ft)

IR10

Mini-jack lead

Speakers (e.g. SS10)

connected via

speaker cable

KP10-EU keypad

840C

840E

AS10

Active

Speaker

AS10

Passive

Speaker

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 840E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 840E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info