Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
80 Series DVD Player
DVD player
User’s manual
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    80 Series DVD PlayerDVD playerUsers manual
  • Page 2

    CONTENTSIntroduction ................................................................................................3Limited warranty..........................................................................................4Safety precautions ......................................................................................5Important safety instructions .....................................................................6Rear panel connections..............................................................................7Connection to a TV/Display........................................................................8Connection to a TV/Display (With DVI-D/DVD89 only).............................9Connection to a TV/Display (With HDMI/DVD89 only) ..........................10Front panel controls..................................................................................13Operating instructions (DVD menu display) ............................................14Operating instructions ..............................................................................16Progressive Scan ......................................................................................19Display settings.........................................................................................20Operations .................................................................................................21DVD Audio..................................................................................................22Using the remote handset (DVD85) .......................................................23Using the remote handset (DVD89) .......................................................24Troubleshooting.........................................................................................25Specifications............................................................................................262 80 Series DVD player
  • Page 3

    85/86/89 DVD playerINTRODUCTIONCongratulations on purchasing this Cambridge Audio 80 Series DVDplayer. We hope that you will enjoy many years of rewarding ownership.The DVD85, 86 and 89 models all support normal CD and DVD discs,while the DVD89 is also a universal player that supports DVD-Audio(DVD-A) and Super Audio CD (SACD). These new audiophile formatsallow even greater sound quality than CD/DVD and also allow multichannel surround-sound audio.In addition, the DVD85, 86 and 89 all support DivX playback for goodquality highly compressed video and audio often downloaded from theinternet. The DVD89 also features the very latest DVD-D and HDMIoutputs for true all digital transmission of video to the TV screen for thevery best picture quality currently available.To maximise the performance from this equipment we would encourageyou to use only high quality viewing equipment, amplification andloudspeakers. Of course we particularly recommend amplification fromthe Cambridge Audio range, which has been designed to the sameexacting standards as this DVD player.Cabling is also an area that should not be overlooked. Please do notcompromise your system's performance by using poor quality cables toconnect either your DVD to your television and amplifier or theamplifiers' output to your loudspeakers. A system is only as good as itsweakest link. Your dealer can supply quality Cambridge Audiointerconnects that will ensure your whole system realises its fullpotential.Thanks for taking the time to read this manual; we do recommend youkeep it for future reference.Matthew BrambleTechnical Director80 Series DVD player 3
  • Page 4

    LIMITED WARRANTYCambridge Audio warrants this product to be free from defects inmaterials and workmanship (subject to the terms set forth below).Cambridge Audio will repair or replace (at Cambridge Audio's option) thisproduct or any defective parts in this product. Warranty periods may varyfrom country to country. If in doubt consult your dealer and ensure thatyou retain proof of purchase.To obtain warranty service, please contact the Cambridge Audioauthorised dealer from which you purchased this product. If your dealeris not equipped to perform the repair of your Cambridge Audio product,it can be returned by your dealer to Cambridge Audio or an authorisedCambridge Audio service agent. You will need to ship this product ineither its original packaging or packaging affording an equal degree ofprotection.Proof of purchase in the form of a bill of sale or receipted invoice, whichis evidence that this product is within the warranty period, must bepresented to obtain warranty service.This Warranty is invalid if (a) the factory-applied serial number has beenaltered or removed from this product or (b) this product was notpurchased from a Cambridge Audio authorised dealer. You may callCambridge Audio or your local country Cambridge Audio distributor toconfirm that you have an unaltered serial number and/or you purchasedfrom a Cambridge Audio authorised dealer.This Warranty does not cover cosmetic damage or damage due to actsof God, accident, misuse, abuse, negligence, commercial use, ormodification of, or to any part of, the product. This Warranty does notcover damage due to improper operation, maintenance or installation,or attempted repair by anyone other than Cambridge Audio or a4 80 Series DVD playerCambridge Audio dealer, or authorised service agent which is authorisedto do Cambridge Audio warranty work. Any unauthorised repairs will voidthis Warranty. This Warranty does not cover products sold AS IS or WITHALL FAULTS.REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTYARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIOSHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIALDAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY INTHIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THISWARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS ANDIMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO,THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICALPURPOSE.Some countries and US states do not allow the exclusion or limitation ofincidental or consequential damages or implied warranties so the aboveexclusions may not apply to you. This Warranty gives you specific legalrights, and you may have other statutory rights, which vary from state tostate or country to country.
  • Page 5

    85/86/89 DVDplayer70 SeriesSAFETY PRECAUTIONSChecking the Power Supply RatingFor your own safety please read the following instructions carefully before attemptingto connect this unit to the mains.Check that the rear of your unit indicates the correct supply voltage. If your mainssupply voltage is different, consult your dealer.This unit is designed to operate only on the supply voltage and type that isindicated on the rear panel of the unit. Connecting to other power sources maydamage the unit.This equipment must be switched off when not in use and must not be used unlesscorrectly earthed. To reduce the risk of electric shock, do not remove the unit'scover (or back). There are no user serviceable parts inside. Refer servicing toqualified service personnel. If the power cord is fitted with a moulded mains plugthe unit must not be used if the plastic fuse carrier is not in place. Should you losethe fuse carrier the correct part must be reordered from your Cambridge Audiodealer.The lightning flash with the arrowhead symbol within an equilateraltriangle is intended to alert the user to the presence of un-insulateddangerous voltage within the products enclosure that may be ofsufficient magnitude to constitute a risk of electric shock topersons.The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating andmaintenance instructions in the service literature relevant to thisappliance.This product complies with European Low Voltage (73/23/EEC)and Electromagnetic Compatibility (89/336/EEC) Directiveswhen used and installed according to this instruction manual. Forcontinued compliance only Cambridge Audio accessories shouldbe used with this product and servicing must be referred toqualified service personnel.The crossed-out wheeled bin is the European Union symbol forindicating separate collection for electrical and electronicequipment. This product contains electrical and electronicequipment which should be reused, recycled or recovered andshould not be disposed of with unsorted regular waste. Pleasereturn the unit or contact the authorised dealer from whom youpurchased this product for more information.Plug Fitting Instructions (UK Only)The cord supplied with this appliance is factory fitted with a 13 amp mains plugfitted with a 3 amp fuse inside. If it is necessary to change the fuse, it is importantthat a 3 amp one is used. If the plug needs to be changed because it is not suitablefor your socket, or becomes damaged, it should be cut off and an appropriate plugfitted following the wiring instructions below. The plug must then be disposed ofsafely, as insertion into a 13 amp socket is likely to cause an electrical hazard.Should it be necessary to fit a 3-pin BS mains plug to the power cord the wiresshould be fitted as shown in this diagram. The colours of the wires in the mainslead of this appliance may not correspond with the coloured markings identifyingthe terminals in your plug. Connect them as follows:The wire which is coloured BLUE must beconnected to the terminal which is markedwith the letter N or coloured BLACK.The wire which is coloured BROWN must beconnected to the terminal which is markedwith the letter L or coloured RED.The wire which is coloured GREEN/YELLOWmust be connected to the terminal which ismarked with the letter E or coloured GREEN.If your model does not have an earth wire, then disregard this instruction.If a 13amp (BS 1363) plug is used, a 3amp fuse must be fitted, or if any other typeof plug is used a 3amp or 5amp fuse must be fitted, either in the plug or adaptor,or on the distribution board.80 Series DVD player 5
  • Page 6

    IMPORTANT SAFETY INSTRUCTIONSPlease take a moment to read these notes before installing your DVD player, theywill enable you to get the best performance and prolong the life of the product. Weadvise you follow all instructions, heed all warnings and keep the instructions forfuture reference.The unit is of Class 1 construction and must be connected to a Mains socket outletwith a protective earthing connection. This unit must be installed on a sturdy, levelsurface.The unit requires ventilation. Do not situate it on a rug or other soft surface and donot obstruct any air inlets or outlet grills. Do not place in a sealed area such as abookcase or in a cabinet. Any space open at the back (such as a dedicatedequipment rack) is fine however.WARNING - To reduce the risk of fire or electric shock, do not expose this unit torain or moisture. This unit must not be exposed to dripping or splashing water orother liquids. No objects filled with liquid, such as vases, shall be placed on theunit. In the event, switch off immediately, disconnect from the mains supply andcontact your dealer for advice.To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaningfluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or nearyour DVD player.Ensure that small objects do not fall through any ventilation grille. If this happens,switch off immediately, disconnect from the mains supply and contact your dealerfor advice.6 80 Series DVD playerDo not route the power cable so that it can be walked upon or damaged by otheritems near it.If you do not intend to use this unit for a long period, switch it to Standby andunplug it from the mains socket. Also unplug the unit during lightning storms.Refer all servicing to qualified service personnel. Servicing is required when theunit has been damaged in any way, such as a damaged power-supply cord or plug,liquid has been spilled or objects have fallen into the unit, the unit has beenexposed to rain or moisture, does not operate normally, or has been dropped.If you have checked the Troubleshooting guide in the manual with no improvement,do not attempt to repair, disassemble or reconstruct the unit. A serious electricshock could result if this precautionary measure is ignored.
  • Page 7

    85/86/89 DVD playerREAR PANEL CONNECTIONSVideo ConnectionsThe DVD85 is equipped with Composite (CVBS), S-Video (SVHS), SCART(RGB and CVBS) and Component Video (YCbCr) connections. The DVD89also incorprates DVI-D and HDMI Digital Video Interfaces.Audio ConnectionsDigital outputs - The DVD89 also incorporates optical and a coaxialdigital output. These allow for a digital soundtrack on a DVD disc to besent to a suitably equipped AV receiver for decoding and amplification.Both outputs perform the same function- simply choose the type thatbest suits your needs.Analogue outputs - Both units have a conventional stereo RCA (phono)out that outputs stereo audio for connection to a conventional stereoamplifier. Also a six channel decoded output is featured in Dolby Digital5.1 format that enables connection to a suitable 6 channel amplifier.SACD and DVD audio disc will only output through the 5.1 analogueouts. See An Introduction to DVD Audio on page 22.Note: A DTS encoded disc will only output the DTS soundtrack throughthe digital outputs for external decoding.(DTS passthrough).AC power socketOnce you have completed all connections to the amplifier, plug the ACPower Cable into an appropriate mains socket.80 Series DVD player 7
  • Page 8

    Connections to a TV /Display(Y)(Cr)(Cb)ScartRear panelAudio InAudio CableorS-VideoVideo InS-VideoVideo CableS-Video CableThe DVD85 and 89 feature a wide range of video ouputs. You shouldalways use the best quality connection your TV supports. In order ofincreasing quality you should use one of composite (CVBS), S-Video,RGB Scart, Component Video (YUV), DVI and finally HDMI.8 80 Series DVD playerIf it is desired to connect the Audio Out of the DVD player to your TV, the2-CH out sockets should be connected to your TVs Audio In terminals.
  • Page 9

    85/86/89 DVD playerConnecting to a Digital TV set with DVI-D (DVD89 only)2-CH OutLDVD80 Series DVD PlayerPower Rating: 100-240V AC 50/60HzMax Power Consumption: 40WCautionRisk of electric shockDo not openAvisRisque de choc electriqueNe pas ouvrirAchtungVorm offnen des geratesNetzstecker ziehenRDVI OUTDVI-DDVDI-D allows the transfer of the digital video signal from the DVD playerto the television without the need for Digital to Analogue conversation.This reduces signal loss resulting in the purest transfer of videoinformation.To select the DVI-D output mode(Press the DVI/HDMI button on the remote)NTSCPALDefault - HDMi OffDefault - HDMi OffPress once 480p1. 576pPress again 720p2. 720p50Hz60HzPress again 1080i3. 1080i>>Progressive scanning is also available from Component Video Outs NTSC & PAL. See page 19 for more information.Note: When in analogue output mode, the general setup page is set toP-Scan.80 Series DVD player 9
  • Page 10

    Connecting to a Digital TV set with HDMI (DVD89 only)HDMIThe DVD89 also features a HDMI (High-Definition Multi-mediaInterface) an industry-supported, uncompressed, all-digital audio/videointerface.HDMI transfers the digital audio and video signals from the DVD playerto the television without the need for Digital to Analogue conversation.This reduces signal loss resulting in the purest transfer of video andaudio information.To select the HDMI output mode(Press the DVI/HDMI button on the remote)PALNTSCDefault - HDMi OffDefault - HDMi Off1. 576pPress once 480p2. 720pPress again 720p60Hz50Hz3. 1080iPress again 1080i>>Progressive scanning is also available from Component Video Outs NTSC & PAL. See page 19 for more information.Note: When in analogue output mode, the general setup page is set toP-Scan.10 80 Series DVD player
  • Page 11

    85/86/89 DVD playerConnection to a 2 Channel Audio System/TVVideo CableAudio CableVideo InAudio InRear PanelFront Left SpeakerFront Right Speaker80 Series DVD player 11
  • Page 12

    Connecting to a 5.1 Input Audio SystemConnecting to an amplifier with Dolby Digital or DTSDigital input connectionsCoaxial inOptical InRear PanelFront Left SpeakerFront Right SpeakerCentre SpeakerAmplifier with 5.1 Audio InputLRFrontSubSurr CentreThe built-in Dolby Digital decoder inside your 80 Series DVD playermakes it possible to play discs recorded with Dolby Digital. This isachieved simply by connecting your player to an amplifier and anappropriate home theatre loudspeaker package5.1 means 5 main channels of output (front left, front right, centre,surround left, surround right) plus subwoofer (the .1).12 80 Series DVD PlayerSubwooferSurroundLeft SpeakerSurroundRight SpeakerManufactured under license from Dolby laboratories. Dolby and the double-Dsymbol are trademarks of Dolby Laboratories. Confidential unpublished works.1992-1997 Dolby Laboratories. All rights reserved.
  • Page 13

    85/86/89 DVD playerFRONT PANEL CONTROLSPower On/OffStopSwitches the unit from Off to On.Stops the Disc playing. If Play is pressed shortly afterwards, the DVD willresume play in the place where it was stopped. Pressing stop twice willtake you to the start of the disc. A Compact disc will stop and a messagewill appear on screen. Press PLAY to continue.Open/CloseAllows you to open and close the disc tray to load a disc. The disc willbegin loading when the tray is closed. Pressing Play will also close thetray and start the Disc.Play/PausePlays the disc and pauses play.Skip/ScanAllows for skipping between the chapters on the DVD disc or tracks on aCD.Note: To perform the scan function from the player it requires the buttonto be held down for a few seconds and then released. Repeating thisprocess will increase the speed of the scanning function.80 Series DVD player 13
  • Page 14

    OPERATING INSTRUCTIONS - DVD MENU DISPLAYAll of these menus are accessed from the blue Cambridge Logo screenthat appears when the DVD player is on with no disc in the tray. Pressingthe SETUP button on the remote brings up the DVD menu display. It isaccessed by the cursors and select button in the centre of the remote.SACD: Allows you to switch between 2 channel, multi channel and CDMode output.PSCAN: Allows you to switch between interlace and progressive scanoutputs via the component video connections.DVD89 OnlyWhen you press the setup button two options will be displayed, commonand professional.Spectrum: Turns On/Off the on-screen 13 bar EQ display.Press the common setup, to setup basic functions, or the professionalsetup for more advanced settings.Analogue Output Mode: Switches between interlaced or progressivevideo scanning.Speaker Set UpDownmix: Switches off the surround soundtrack (5.1 analogue outputsection) and outputs a stereo signal from the 2 channel Left and RightOutputs.General SetupTV Display: Allows you to alter between 16.9 widescreen and 4.3conventional image.SCART: Switches the SCART output between RGB and Composite Video.You will need a suitably equipped television to handle a componentsignal.Screensaver: If the DVD is left on and inactive, it will switch to ascreensaver to minimise energy consumption and screen burn. It can beswitched off here.14 80 Series DVD playerFront, Centre and Rear Speaker Settings: adjusts the DVD decoder tocompensate between large and small speakers and the size of thesignal it sends to the subwoofer.Subwoofer Off/On: Informs the player if a subwoofer is present. If it ispresent the low frequencies are split off and sent to the subwoofer, if notthe complete audio spectrum will be heard through the front channel.Channel Delay: Allows the distance between the listening position andthe centre, subwoofer, rear left and rear right speakers to be individuallyset (in cm). This is to enable the surround sound to be optimised fordifferent listening room sizes and shapes.
  • Page 15

    85/86/89 DVD playerAudio Setup PageVideo Setup PageEQ: Adjusts the final effect of the stereo output with a number ofoptional presets.The various settings on this screen are all concerned with fine tuningyour DVD picture. You can adjust settings here whilst leaving thetelevision settings as they are.Soundfield: Adjusts the final effect of the decoder output with a numberof surround effects presets.SPDIF output: Switches the digital audio section of the decoder/outputbetween bitstream (Raw) and uncompressed stereo digital out (PCM).The bitstream (Raw) must be selected to enable surround sound (Dolbydigital/DTS) to be sent to an external decoder via the audio digitaloutput (coaxial or optical). If only a stereo speaker system is to be usedthen it is only necessary to set this option to PCM, then only twochannels of information are decoded and sent to the stereo audiooutputs (and the coax/optical digital audio output).LPCM Out: This sets the maximum data rate for the digital audio output(not the actual data rate from source) for connection to an externaldecoding amplifier. The internal decoder will downsample if therecorded material has a higher audio data rate although it will notupsample if the recorded material has a lower audio data rate.Dolby Digital setup/Dynamic: This allows the adjustment of the Dynamiccompression applied to the audio. This can be useful when listening toaction films (large dynamic range between talking and explosions) lateat night. When set to maximum this will force the quiet and loud partsof the signal to a similar level.Channel Trim: Allows adjustment of the decoder levels for eachindividual channel in turn to optimise audio setup.Preference PageTV Type: the DVD player can be set for either a European PAL televisionor an NTSC unit. Alternatively AUTO will allow the DVD to adjustautomatically, following the TV format of the DVD disc.Audio Setting: Setting a particular language here will mean the DVD willautomatically look for that language on any DVD inserted into themachine.Subtitle: Setting a particular language here means that the DVD will lookfor this particular language. Setting it to the same as the Audio settingwill cancel the subtitles out.Disc Menu: This allows adjustment of the Scene selection/Specialfeatures menu where permissible by the disc.Parental: Adjusting this blocks films above a set classification level (iePG13) from playing on the player if children are using it, if you wish.Password: This is how to alter the above settings. The password defaultis 7890 and can be changed by correctly entering the default followedby your new password.Default: This can restore all of the original factory settings if required.Note: When a film is playing it is not possible to access the setup menu unless thestop button is pressed twice (clearing the film position altogether).80 Series DVD player 15
  • Page 16

    OPERATING INSTRUCTIONSLoading and unloading discsNormal disc play1. Press the Power switch.2. Press the Open/Close button.1. Switch on your television and if you have an amplifier, set its inputselector to the correct position and reduce the volume control to aminimum.3. When the disc tray has opened fully, place a disc carefully in the traywith the label side facing up.2. Press the Power switch. Most televisions will automatically switch tothe channel/input that the DVD is connected to.4. To close the disc tray, press the OPEN/CLOSE button again. When thetray with a correctly loaded disc is fully closed, the disc will startturning automatically. After the DVD player has read the disc it willstart to play. Pressing PLAY will also close the tray and start playingthe disc.3. Press the Open/Close button to open the disc tray, and load a disc.5. The disc tray can be opened at any time by pressing the OPEN/CLOSEbutton. Only remove the disc after the tray has fully opened.Note:Do not put anything except a DVD/CD sized disc into the tray, foreignobjects may damage the mechanism.Do not force the tray by hand during the opening and closing operations.To avoid dirt and dust entering the mechanism, keep the disc trayclosed.If the Disc is seriously scratched or too dirty the player may not be ableto read it or play it.Never load more than one disc into the disc tray at one time.16 80 Series DVD player4. Press the Open/Close button again to close the tray. The DVD playerwill read the disc and begin to load. Alternatively, pressing Play willclose the tray and start playing the disc.Note: CDs will automatically play.5. The DVD disc should load to the opening menu (where sceneselection, sound/special features can be accessed). Some discs willbegin playing the film but can be returned to the menu by pressingthe Menu button.6. To stop the disc at any point, press the Stop button. Pressing the Playbutton on the front of the DVD player while the disc is playing willpause the disc. Pressing play on the remote will have no effect asthere is a separate pause button. When the disc is paused the pauseicon appears on screen, play can be resumed by pressing the PLAYbutton again.When the DVD has finished playing, it will cycle back to the start menu,a CD will return to standby mode. If the REPEAT button has beenpressed, the DVD player will start the film or CD again.
  • Page 17

    85/86/89 DVDplayer70 SeriesLocating a specific point in the DVDRepeating CD discs and tracksStart the disc as mentioned in the previous chapter. It is often possibleto locate the point that you wish to view through the Chapter/SceneSelection on the disc menu that is navigated by the cursor keys. Thesechapters can be accessed by the skip buttons on the remote or on thefront panel of the player.1. Ensure that the disc is playing.2. Each press of the REPEAT button scrolls through the available optionsdisplayed on your TV screen.Repeat trackIt is also possible to search within the chapter using the Search buttonson the remote control handset. Pressing the Search button repeatedlywill speed the playback up from x2 through x32 speed. This can also bedone in reverse.>> x2>> x4>> x8<<< x32<< x16Repeat allRepeat offIt is also possible to repeat a favourite point of a CD/DVD disc by usingthe A-B function. Pressing the button once "marks" the beginning of thesection you wish to repeat, pressing it again "marks" the end. The playerwill now repeat this section of the disc.Repeating DVD discs and tracksNote: This function is unavailable on certain discs.1. Ensure that the disc is playing.Zoom2. Each press of the REPEAT button scrolls through the available optionsdisplayed on your TV screen.1. When playing a disc, press the Zoom button repeatedly to zoom intoa specific area of the TV screen display.Repeat chapterRepeat titleRepeat offRepeat allx2x1x4x3x1/4x1/2x1/380 Series DVD player 17
  • Page 18

    MPEG4 PlaybackPlaying MPEG4 FilesThe MPEG4 is the standard publicised by MPEG4 (Moving PictureExperts Group). MPEG4 allows video and audio to be compressed to afraction of its original size.When you insert a MPEG4 disc, the TV screen displays the operationmenu as shown in Figure A (the displayed contents vary with the disc.)A:With a scalable bitstream, it can be adapted to dynamically varyingrequirements.PC-created disc compatibility: Discs created using a computer may not beplayable in this unit due to the setting of the application software used to createthe disc. In these particular instances, check with the software publisher formore detailed information.Discs recorded in packet write mode (UDF format) are not compatible with thisplayer. Check the DVD-R/RW or CD-R/RW software disc boxes for additionalcompatibility information.Note: DivX version is still upgrading continuously and the latest version of thisunit is DivX 5.1. Some discs labelled with MPEG4 on the market actuallyare*.rm/*.ram/*.rmm and others which are incompatible. Please take carewhen buying discs.18 80 Series DVD PlayerB:00:00 00:00001/00400:00 00:00001/369\\Du000\Du000..Du001A/VMP000Du002A/VMP001Du003A/VMP002Press UP/DOWN arrows to select the desired directory. Press SELECT forverification. For example, you select the directory DU000 in Figure A andpress SELECT as shown in Figure B.The window returns back to the Press UP/DOWN arrows to select thedesired directory. Press SELECT for verification. For example, you selectthe directory DU000 in Figure A and press SELECT as shown in Figure B.The window returns back to the previous directory when you select[ .. ] in the first line or press LEFT arrow.Press UP/DOWN arrows in Figure B to select the desired MPEG4 file.Press SELECT for verification. The player will then play the MPEG4 files.
  • Page 19

    85/86/89 DVD playerCONNECTION TO A PROGRESSIVE SCAN TV/DISPLAYSome televisions and monitors are equipped with component videoinputs and are capable of reproducing a progressively scanned videosignal. Connecting to these inputs allows you to view higher qualitypictures with less flicker.To enable progressive scan via the component output please refer topage 13 under general setup to explain how to access this in the menu.If you find that you have no display but aregetting sound from your speakers, you have setthe DVD player to progressive scan mode.Simply press the I-Scan button on your remotecontrol.YPrPbRear PanelNote: TV set with progressive-scanvideo inputAudio InAudio CordIf your progressive scan TV has Y, Pb Pr video inputs you can use theplayers Y, Cb/Pb, Cr/Pr outputs . Press the P-Scan button to switch theplayer to the progressive scan video output mode.If this players audio outputs are also connected to the TV, the L/Rchannels of 2-CH OUT should be connected to the TVs AUDIO INterminals.It is imperative that you use high quality component video cables toensure the best possible performance.80 series DVD player 19
  • Page 20

    DISPLAY SETTINGSScreen sizes and disc formatsSet to 4:3 (Letter Box) widescreen discs are shown with black bars topand bottom.DVD-Video discs come in several different screen aspect ratios, rangingfrom TV programs, which are generally 4:3, to CinemaScope widescreenmovies, with an aspect ratio of up to about 7:3. Televisions, too, come indifferent aspect ratios; standard 4:3 and widescreen 16:9.Widescreen TV usersIf you have a widescreen TV, the TV Screen setting of this player shouldbe set to 16:9 (Wide)When you watch discs recorded in 4:3 format, you can use the TVcontrols to select how the picture is presented. Your TV may offer variouszoom and stretch options; see the instructions that came with your TVfor details.Set to 4:3 (Pan&Scan) widescreen discs are shown with the left andright sides cropped. Although the picture looks larger, you dont actuallysee the whole picture.Please note that some movie aspect ratios are wider than 16:9, so eventhough you have a widescreen TV, these discs will still play in a letterbox style with black bars at the top and bottom of the screen.Standard TV usersIf you have a standard TV, the TV Screen setting of this player should beset to 4:3 (Letter Box) or 4:3 (Pan&Scan) depending on which you prefer.Please note that many widescreen discs override the players settings sothat the disc is shown in letter box format regardless of the setting.20 80 Series DVD Player
  • Page 21

    85/86/89 DVD playerOPERATIONSInfo menuCD Mode (DVD89 Only)Pressing the info button brings up the menu shown below:Pressing the CD Mode button on the remote control turns off anyconnected display device. This function is designed to reduce screenburn when playing audio only discs.Note: This display may vary due to the formatting and programming ofyour DVD disc.Pressing the CD Mode button again turns on any connected displaydevice.Note: Only when a CD is played.Problems using DVI and HDMITo ensure this connection works correctly please ensure: That the DVI connection is DVI-D to DVI-DThis enables you to conveniently perform several DVD disc functions oftitle, chapter, sound, subtitle, angle, title time, chapter time, repeat playand time display. Use the navigation and select keys on the remotecontrol to navigate through the menu. That your screen supports HDCP (High-Definition Copy Protection). That your screen is capable of displaying the resolution being outputby the DVD Player.Pressing the info button again takes you back to full screen video.Note: Cables which run over 5m may cause sync or grounding issues.80 Series DVD Player 21
  • Page 22

    DVD AUDIOWhat is DVD Audio?Using MLP lossless from Dolby Laboratories. DVD-Audio discs can storeup to six channels of 24-bit/96 kHz audio, including a separate lowfrequency bass channel. Compare that to two channels of 16-bit/44.1kHz sound from CDs! For stereo buffs, a DVD-Audio disc canalternatively hold two channels of 24-bit/192 kHz audio, exceeding thequality of any music audio format previously available.22 80 Series DVD PlayerDVD-Audio discs can also add a visual element to your music. Discs cancarry picture galleries, lyrics, notes, or any combination of still images,animation, and text. Producers and artists can even add audiocommentary, similar to that found on many DVD-Video discs. And, aswith DVD-Video, each DVD-Audio disc can also contain full-motion video,with accompanying Dolby Digital sound in up to 5.1 channels.
  • Page 23

    85/86/89 DVD playerUSING THE REMOTE (DVD85)151When you have unpacked your remote handset, insert the supplied AAAbatteries to activate it. The remote can control all of the standardplayback options but is also important in setting up your DVD player asmany of the menus are most easily accessed from the remote.21617345181920621222378242526272829910111213141. Eject2. Number buttons3. Zoom4. Angle5. Menu6. Return7. Volume8. Mute9. Clear10. A-B Button11. Skip Fwd12. Skip Back13. OSD14. PAL/NTSC15. Standby16. Audio17. Subtitle18. Title19. Select20. Setup21. Play/Stop/Pause22. Slow23. Mode24. Info25. Repeat26. Scan Prev27. Scan Rev28. I-Scan29. PSMKeep in mind the following when using the remote control: Make sure that there are no obstacles between the remote and the remotesensor on the unit. The remote has a range of about 7m. Remote operation may become unreliable if strong sunlight or fluorescentlight is shining on the units remote sensor. Remote controllers for different devices can interfere with each other.Avoid using remotes for other equipment located close to this unit. Replace the batteries when you notice a fall off in the operating range ofthe remote.80 Series DVD player 23
  • Page 24

    USING THE REMOTE (DVD89)151When you have unpacked your remote handset, insert the supplied AAAbatteries to activate it. The remote can control all of the standardplayback options but is also important in setting up your DVD player asmany of the menus are most easily accessed from the remote.216173451819206217822232425262728291. Eject2. Number buttons3. Zoom4. Angle5. Menu6. Return7. Volume8. Mute9. Clear10. A-B Button11. Skip Fwd12. Skip Back13. OSD14. PAL/NTSC15. Standby16. Audio17. Subtitle18. Title19. Select20. Setup21. Play/Stop/Pause22. Slow23. Mode24. Info25. Repeat26. Scan Prev27. Scan Rev28. DVI/HDMI29. CD MODE91011121314Keep in mind the following when using the remote control: Make sure that there are no obstacles between the remote and the remotesensor on the unit. The remote has a range of about 7m. Remote operation may become unreliable if strong sunlight or fluorescentlight is shining on the units remote sensor. Remote controllers for different devices can interfere with each other.Avoid using remotes for other equipment located close to this unit. Replace the batteries when you notice a fall off in the operating range ofthe remote.24 80 Series DVD Player
  • Page 25

    85/86/89 DVD playerTROUBLESHOOTINGThere is no powerThere is no image, but soundEnsure the AC power cord is connected securely.Ensure the plug is fully inserted into the wall socket and is switched on.Check fuse in the mains plug or adaptor.You have set the DVD player to progressive scan mode. Simply pressthe I-Scan button.Press CD Mode button.The player will not read the discCheck the disc is not loaded upside down.Check that the disc is not too scratched or dirty.There is no soundEnsure that the amplifier is set correctly.Check that the interconnects are inserted correctly.The disc is skippingCheck that the disc is not too scratched or dirty.Ensure the player is on a firm surface and not subject to vibrations.There is a hum coming from the speakerEnsure that all cable connections are secure.The remote handset will not functionCheck that the batteries have not expired.Ensure that nothing is blocking the remote sensor.Note: Static electricity or other external influences may cause malfunctioning ofthis unit. In this case, unplug the power cord and then plug back in. This will usuallyreset the unit for proper operation.80 Series DVD player 25
  • Page 26

    SPECIFICATIONSDisc typesDVD, DVD-A, DVD-V, CD-RW,CD-R, CD-DA, DIVX, SACDAudio formats5.1 and stereo downmixLPCM 16 bit 44.1kHzDolby Digital 5.1 24 bit 96kHzDTS output (digital audio out only)DVD audio 2 channel 24 bit 192kHzDVD audio 5.1 (MLP) 24 bit 96kHzVideoComposite Video (CVBS)S-Video (SVHS)RGBDVI-D & HDMIComponent (YCbCr)PAL/NTSCInterlaced/Progressive scanTHD (unweighed)< 0.01%Dynamic Range>100dBFrequency response20Hz - 20kHzVideo amplitude1.0V pk-pk (75 ohms)S-Video amplitudeY: 1.0V pk-pk n (75 ohms)C: 0.286V pk-pk (75 ohms)Power supply100-240V ACMax power consumption40WDimensions (mm) (H x W x D)55 x 430 x 263Weight (kg)2.56 kgNote: Not all features applicable to all models.26 80 Series DVD player50/60HzThe DivX standard is continuously being upgraded, this unit supports the latestversion DivX 5.1.Some discs labelled MPEG4 on the market are actually *.rm/*.ram/*.rmm(incompatible formats) . Pleases take care when buying discs.Functions on some discs may not work on this unit. This is not a malfunction of theplayer.Cambridge Audios policy is one of continuous improvement. Design andspecifications are therefore subject to change without prior notice.
  • Page 27

    85/86/89 DVD player80 Series DVD player 27
  • Page 28

    4



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cambridge Audio DVD89 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Cambridge Audio DVD89 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,37 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Cambridge Audio DVD89

Cambridge Audio DVD89 Bedienungsanleitung - Deutsch - 28 seiten

Cambridge Audio DVD89 Bedienungsanleitung - Holländisch - 28 seiten

Cambridge Audio DVD89 Bedienungsanleitung - Dänisch - 28 seiten

Cambridge Audio DVD89 Bedienungsanleitung - Italienisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info