Quick Start Guide
Connect the charging adaptor to the G2 and charge for
4 hours before first use.
Press and hold the power button on the top of the unit for two
seconds to turn it on.
Pairing a second device
To pair a different device, press the BT button a second time to
enter pairing mode and pair your Bluetooth device as described in the
Press the button to select the Aux input. There is an Aux input
on the rear of the unit that allows any analogue device to be connected.
G2 has a built in microphone and can be used to answer and make
phone calls from your connected device. If you have an incoming call
the ‘phone’ button will flash and you can choose to answer with
G2 by pressing the button. If you make a call from a connected device,
G2 will automatically switch to speakerphone mode.
Sync two G2
It is possible to synchronise two G2 speakers together so that both will
play back your music simultaneously. Using the mode switch on the
rear of G2, select ‘A’ on one and ‘B’ on the other and then double press
the BT button on each G2.
Auto power down
To save power, your G2 will automatically turn off after 30
minutes if no music is playing. Press the power button to turn
the G2 back on.
Low battery warning
A flashing red LED indicates that the battery is too low and
the G2 will enter a standby mode where no music can be played.
This LED will continue flashing for 10 minutes after which the
G2 will turn off.
The G2 can be used to charge compatible mobile devices. If the
charging adaptor is not connected this will discharge the battery.
To talk to us, call +44 (0)203 514 1521 (UK Local)
or 1-877-357-8204 (USA)
! Battery Safety
Your G2 contains a high performance battery and charging system that is
designed to work in temperatures that do not exceed 50°C (122°F). Leaving this
product in an automobile where temperatures may exceed this limit may result in
permanent battery damage, fire or explosion. Do not leave your product in any
location where temperatures may exceed this limit. Please recharge the battery
every two months to maintain the battery in optimal condition.
Press the BT button to select the Bluetooth input.
Pairing your device manually
Press the BT button to enter Bluetooth pairing mode. The flashing
blue LED indicates pairing mode.
Enable Bluetooth connectivity on your Bluetooth device (eg. phone,
tablet etc) and pair with the G2 (you may need to consult your
phone or tablet operating instructions).
If your Bluetooth device is NFC enabled
You may need to ensure Bluetooth is enabled on your device.
Touch your NFC device against the logo . G2 will enter automatic
pairing mode and ‘G2’ should appear on your device.
up & down
G2 Front view
G2 Rear view