Bedienungsanleitung Cambridge Audio MINX AIR 100 (Seite 5 von 13) (Englisch)

656772

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Wi-Fi information

FCC Statement

Air 100

FCC ID: YKBMA100-002 IC ID: 9095A-MA100002

Air 200

FCC ID: YKBMA200-003 IC ID: 9095A-MA200003

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC

COMPATIBILITY

We, Cambridge Audio, of Gallery Court, Hankey Place, London SE1 4BB,

declare under our sole responsibility that this device,

Air 100/200 with Wi-Fi module

to which this declaration relates, complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The device shall be used in such a manner that the potential for human contact

during normal operation is minimized.

When connecting an external antenna to the device, the antenna shall be placed

in such a manner to minimize the potential for human contact during normal

operation. This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy, and if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try and correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by the

party responsible for compliance could void the user’s authority to operate this

equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

2 .4GHz operation of this product in the USA is rmware-limited to channels 1

through 11.

Modications

The FCC requires the user to be notied that any changes or modications to this

device that are not expressly approved by Cambridge Audio, may void the user’s

authority to operate the equipment.

Canada-Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using

an antenna of a type and maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for successful communication.

This radio transmitter 9095A-MA100002 (Air 100) / 9095A-MA200003 (Air 200)

has been approved by Industry Canada to operate with the antenna types listed

below with the maximum permissible gain and required antenna impedance for

each antenna type indicated. Antenna types not included in this list, having a gain

greater than the maximum gain indicated for that type, are strictly prohibited for

use with this device.

C059-510137-A; Antenna+RG-178 Cable+SMA Plug Reverse, 3.0dBi, 50Ω

This equipment complies with RSS-102 limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum

distance of 20cm between the radiator and your body.

Cet appareil numérique de Classe B est conforme à la norme Canadienne ICES-

003

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions

suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de

l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio

peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)

approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les

risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut

choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une

communication satisfaisante.

Le présent émetteur radio 9095A-MA100002 (Air 100) / 9095A-MA200003 (Air

200) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne

énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise

pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou

dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour

l’exploitation de l’émetteur.

C059-510137-A; Antenna+RG-178 Cable+SMA Plug Reverse, 3.0dBi, 50Ω

Cet équipement est conforme a RSS-102 limites énoncées pour un environnement

non contrôlé. Cet équipement doit être installé et utilisé avec une distance

minimale de 20 cm entre le radiateur et votre corps.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for

uncontrolled environments. This equipment should be installed and operated with

a minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.

Europe-European Union Notice

Radio products with the CE 1588 or CE alert marking comply with the R&TTE

Directive (1995/5/EC) issued by the Commission of the European Community.

Compliance with this directive implies conformity to the following European Norms.

• EN 60950-1 – Product Safety.

• EN 300 328 – Technical requirement for radio equipment.

• EN 301 489 – General EMC requirements for radio equipment.

To determine the type of transmitter, check the identication label on your

Cambridge Audio product.

Products with the CE marking comply with European Low Voltage (2006/95/EC),

Electromagnetic Compatibility (2004/108/EC) and Environmentally-friendly design

of Energy-related Products (2009/125/EC) Directives issued by the Commission of

the European Community. Compliance with these directives implies conformity to

the following European Norms.

• EN 55022 – Electromagnetic Interference.

• EN 55024 – Electromagnetic Immunity.

• EN 61000-3-2 – Power Line Harmonics.

• EN 61000-3-3 – Power Line Flicker.

• EN 60950-1 – Product Safety Products that contain the radio transmitter are

labeled with CE 1588 or CE alert marking and may also carry the CE logo.

• EN 62301:2005 - Household electrical appliances. Measurement of standby

power.

• 1275/2008 - Implementing EuP Directive for Standby Power Consumption.

ENGLISH

Cambridge Audio MINX AIR 100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio MINX AIR 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info