Bedienungsanleitung Cambridge Audio Stream Magic 6 V2 (Seite 15 von 20) (Englisch)

656763

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Pairing

To begin streaming high quality music from your chosen media source it will rst

need to be paired with the BT100.

A. Insert BT100 into the USB port at the back of your Stream Magic 6.

B. Wait a moment for the BT100 to be detected. Then double click the button to

enter pairing mode, the BT100 indicates it is in the pairing state by ashing

rapidly.

C. Put your Bluetooth compliant audio source into pairing mode. Please consult

your manufacturer’s user manual on how to do this.

Pairing your BT100 and source establishes an authorised audio link that can then

be used again in the future without having to go through this stage again.

After pairing you can just select the BT100 and play at any time as long as your

Bluetooth A2DP compatible source (phone/laptop etc.) is within approx. 10m of

the BT100.

Normally on your source you will need to select Bluetooth Pairing and then the

BT100 should appear as ‘Cambridge Audio BT100’ in a list of locally found

Bluetooth devices.

Select that item in the list to nish pairing.

D. On successful pairing, the BT100s LED goes off for a second or two, then triple

ashes quickly. The LED then goes off and only lights up in the future when you are

playing audio via Bluetooth.

E. To play back via a paired Bluetooth device, simply select the BT100 on that

device and start playing. The BT100 LED lights up constantly when streaming SBC

or on and icks off every 2 seconds when streaming apt-X.

Notes:

- You can pair to more than one source up to a maximum of 8 sources at any time.

Pairing to a 9th device will cause the rst one to be forgotten and so on. However

as you would expect the BT100 can only play back from one of these sources at

a time.

- When you have nished playback many sources keep the Bluetooth link active for

a time unless you actively tell them to stop by deselecting playback via the BT100

(do not unpair as this is not necessary).

This can prevent another source to be able to access the BT100.

To immediately use another source, simply deselect the BT100 for playback on

your rst source device before starting up on a second.

- Some devices stream empty data all the time even when paused or stopped.

These devices will cause the BT100s LED to be on even if playback is currently

stopped or paused.

This menu contains various setup/conguration menus as shown below.

Settings

Network

Firmware

Stream Magic 6 Name

Advanced

Factory Reset

This will display a key that can be used to register your Stream Magic 6 on the

Stream Magic website at www.stream-magic.com. First you will need to set up

an account on Stream Magic. Open www.stream-magic.com from your Internet

browser. See the section earlier on Stream Magic registration.

Note:

– The generated key lasts for about 10 minutes, if you don’t use it in that time you

will need to exit and re-enter this menu to get a new key.

– All saved Presets will be deleted when a unit is registered/re-registered.

Network

This menu enables you to set your Stream Magic 6’s network settings, scan again

for a connection to another wireless network, or to manually congure the network

parameters. This is useful if you move your Stream Magic 6 to a new location for

instance.

By default the Stream Magic 6 will be set for Automatic wired/wireless detection

and automatic IP addressing (DHCP) which will work without setup in most

circumstances (for Wi-Fi you will need to enter your WEP/WPA key if you have one).

In Auto mode the Stream Magic 6 will look for a wired connection rst and then

scan for wireless connections if it doesn’t nd one. It will also try to obtain an IP

address automatically from your router/DHCP server.

If you wish to make changes to your setup the Stream Magic 6 displays the

following submenus.

Network

Scan for networks

Enter network name

View Cong

Edit Cong

WiFi Strength

Signal Warning

WiFi Region

Wired/Wireless

Scan for networks

This option scans all available Wi-Fi frequencies for wireless networks and allows

you to connect to them.

The Stream Magic 6 can connect to 802.11b/g or n networks (2.4GHz frequency

range only for n networks).

A list of available networks will be presented. If a particular network requires an

encryption key, a

symbol will be seen at the end of the network name.

Select your local network using the Navigation/Select dial and press it in for enter.

Settings menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Stream Magic 6 V2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Stream Magic 6 V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info