Bedienungsanleitung Cambridge Audio AZUR 851E (Seite 13 von 16) (Englisch)

656741

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

851Eazur

ENGLISH

Fixed volume

Any input of the 851E is able to be set for xed gain. Whenever this input

is selected the gain will automatically go to this value and will not be

adjustable by the volume control. This can be useful with sources that

have their own built in volume control (such as some set-top boxes etc.)

Also, this feature can be used to integrate an AV Receiver which has

pre-amp outputs (such as our own 651R or 751R models) with the 851E.

The front Left and Right pre-amp outputs of the AV Receiver are simply

fed to any desired input of the 851E and that input set for xed gain. The

AV receiver is then wired to the various surround speakers whilst the

851E/W drives the Front Left and Right.

The 851E/W can then be used for Stereo sources as normal for best

sound quality. When it is desired to decode surround sound, select the

input chosen for xed gain on the 851E. Now the AV Receiver can be

used to decode any of it’s surround sound sources. It will have control

of the volume of all channels and the 851E’s own volume control will be

disabled.

You may wish to re-name the xed level input as “AV mode” or similar on

the 851E. As the gain can be xed to any value it is easy to match the

level of the 851E to that of the other AV channels.

To set a xed volume for a source, press and hold the required input

source button then select Fixed Vol in the submenu:

Mode

Volume

Enable Apply

Save

Fixed Vol

Minimum

Maximum

Press the Enable button and set the xed gain using the volume control.

When a source has a xed input, the balance is always set to neutral.

Press the Apply button to temporarily hear the new gain settings, re-

adjust the gain if necessary and press the Apply button again. Press the

Save button to save and exit the submenu.

The other two settings sets the gain as following:

Minimum – Sets the minimum xed gain value to -90dB.

Maximum – Sets the maximum xed gain value to 0dB.

Vol Clip

Used in conjunction with 851W via Control Bus. The 851E reduces the

volume if there is a clipping notication from the 851W.

Control menu

Used in conjunction with Custom Installation (C.I.) systems or IR repeater

systems, it may be desirable to disable the IR function by setting IR to

off. In the System settings menu, press the Control input select button to

enter the submenu. Pressing the IR input select button will scroll through

the IR enabled options of Front, Back, Front + Back and IR IC (disable

front and back IR). Press the Mode button to exit the submenu.

Mode

Volume

Frn+Bck

Control

C-Bus

RS232C

In the System settings menu, press the Control input select button to

enter the submenu. Pressing the RS232C input select button will scroll

through the data bit rate options of 115200b, 38400b, 9600b, and

RS232C (disabled).

Mode

Volume

Front IR

Control

C-Bus

115200b

Devices menu

Note: The Device menu item is hidden if the C-Bus is disabled.

When going in/out of Standby mode the 851E can automatically turn

on and off other connected Cambridge Audio Azur models that have

control bus sockets. For this feature to work the units must be connected

together (see diagram) by RCA/phono leads. The Control Bus sockets

are colour-coded orange on the rear panels of any compatible Azur

models. Connect the Control Bus Out from the 851E to the Control Bus

In on another Azur model (e.g. 851W). Continue the chain to other Azur

models if required.

851C

851W

851E

IMPORTANT! When doing a daisy-chain of other Azur models through

the Contol Bus, the 851E must be the main power source, otherwise

it will not work.

Firstly, enable the Control Bus function. In the System settings menu,

press the Control input select button to enter the submenu then press

the C-Bus input select button to enable the function.

Mode

Volume

Front IR Devices

Control

C-Bus

RS232C

Press the Devices input select button to enter the submenu. Select the

connected Azur models by pressing the appropriate input select button.

For example, CA xxxC for an Azur CD player (851C), CA xxxD for an Azur

DVD, CA xxxR for an Azur AV Receiver, SMx/xxxD for an Azur StreamMagic

and DACs etc.

Volume

Enable CA XXXN

CA FM T

CA DAB T

Devices

CA 851C

CA XXXD

CA XXXR

Mode

Pressing the Enable input select button to scroll through the options of

On+Off (turns all Azur units on and into Standby mode), Off (turns all

Azur units into Standby only), On (turns all Azur units on only), or Enable

(this disables the Control Bus function).

Volume

CA XXXN

CA FM T

CA DAB T

Devices

CA 851C

CA XXXD

CA XXXR

Mode

On+Off

Press the Mode button to exit the submenu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio AZUR 851E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio AZUR 851E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info