Bedienungsanleitung Candy 2d 365 x (Seite 13 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

330330

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

WARNING : the first operation to carry out after the oven has been

installed or following the interruption of power supply (this

is recognizable the display pulsating and showing )

is setting the correct time. This is achieved as follows

• Press and hold the TIMER and END buttons ( and TIMER on some

models

• Set time with buttons

• Release all buttons

• Sounds an alarm at the

end of the set time.

• To check how long is

left to run press the

button

To set the time, push the control knob and turn anti-clockwise to position at the correct time.

To set as minute minder, set the cooking time by turning anticlockwise the knob without pushing,

until the desired time is shown at the small window on the left of the clock (max. 180 minutes).

When the preset time is elapsed the alarm will ring and the oven must be switched off manually.

To stop the alarm turn the knob until appears in the window.

• When the set time as

elapsed an audible alarm

is activated (this alarm will

stop on its own, however

it can be stopped

immediately by pressing

the button)

• Press and hold the

button

• Press the buttons or

to set the required time

• Release all the buttons

• Press and hold the END

button

• Press the buttons

to set the time at which you

wish the oven to switch off

• Release the buttons

• Set the cooking function

with the oven function

selector

USE OF THE ELECTRONIC PROGRAMMER

FUNCTION

HOW TO ACTIVATE IT HOW TO SWITCH ITOFF WHAT IT DOES WHAT IT IS FOR

MINUTE MINDER

• Allows to use the oven as

alarm clock (could be

activated either with

operating the oven or

with out operating the

oven)

• For cooking the desired

recipes

MANUAL

FUNCTION

• Turn the oven function

selector to position O.

• Enables you to operate

the oven.

COOKING

TIME

• Press and hold the

TIMER button

• Press the buttons or

to set the lenght of coo-

king required

• Release all buttons

• Set the cooking function with

the oven function selector

• When the time is elapsed

the oven will switch off

automatically. Should you

wish to stop cooking

earlier either turn the

function selector to 0, or

set time to 0:00

(TIMER and buttons)

• It allows to preset the

cooking time required

for the recipe chosen

• To check how long is

left to run press the

TIMER button.

• To alter/change the

preset time press

TIMER and buttons

• At the end of the

cooking set time,

the oven will switch

off automatically and an

audible alarm will ring.

END OF

COOKING

• This function is typically

used with “cooking time”

function. For example

if the dish has to be cooked

for 45 minutes and needs

to be ready by 12:30,

simply select the required

function, set the cooking

time to 45 minutes and the

end of cooking time to

12:30.

• Cooking will start automa-

tically at 11:45 (12:30

minus 45 mins) and will

continue until the pre-set

end-of-cooking-time, when

the oven will switch itself

off automatically.

WARNING.

If the END of cooking is

selected without setting

the length of cooking time,

the oven will start cooking

immediately and it will

stop at the END of

cooking time set.

• At the time set, the oven

will switch off. To switch

off manually, turn the

oven function selector

to position O.

• Enables you to set the

end of cooking time

• To check the preset

time press the END

button

• To modify the preset

time press buttons

END +

• Press the button

• Set the cooking function

with the oven function

selector

ATTENTION the oven only operates if set on manual function or preset time.

N.B.: on some models the symbols are replaced by + and - .

SETTING THE CORRECT TIME

Reading of the

time selected

12 GB

USING THE MINUTE TIMER

To set the cooking time, turn dial one

complete revolution and then position

the index to the required time. When

the time has lapsed, the signal will ring

for a few seconds.

USING THE END OF COOKING TIMER

This control enables to set the desired

cooking time (max. 120 min.) the oven

will automatically switch off at the end

of the set time.

The timer will count down from the set

time return to the O position and switch

off automatically.

For normal use of oven set the timer to

the position.

To set the oven ensure the timer is not on the O position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy 2d 365 x Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info