Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
EN
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    EN



  • Page 2

    2



  • Page 3

    Thank-you for choosing a Candy washing
    machine. We are confident it will loyally
    assist you in safely washing your clothes,
    even delicates, day after day.

    Environmental conditions
    This appliance is marked according to
    the European directive 2012/19/EU
    on Waste Electrical and Electronic
    Equipment (WEEE).
    WEEE contains both polluting substances (which
    can cause negative consequences for the
    environment) and basic components (which can
    be re-used). It is important to have WEEE
    subjected to specific treatments, in order to
    remove and dispose properly all pollutants, and
    recover and recycle all materials. Individuals can
    play an important role in ensuring that WEEE
    does not become an environmental issue; it is
    essential to follow some basic rules:

    Carefully read this manual for correct and
    safe appliance use and for helpful tips on
    efficient maintenance.

    Only use the washing machine after
    carefully reading these instructions. We
    recommend you always keep this manual on
    hand and in good condition for any future
    owners.

    l WEEE should not be treated as household
    waste;

    Please check that the appliance is delivered
    with this instruction manual, warranty
    certificate, service centre address and
    energy efficiency label. Also check that
    plugs, drain hose support hook and liquid
    detergent or bleach tray (only on some
    models) are included. We recommend you
    keep all these components.

    l WEEE should be handed over to the relevant
    collection points managed by the municipality or
    by registered companies. In many countries, for
    large WEEE, home collection could be present.
    In many countries, when you buy a new
    appliance, the old one may be returned to the
    retailer who has to collect it free of charge on a
    one-to-one basis, as long as the equipment is of
    equivalent type and has the same functions as
    the supplied equipment.

    FOR U.K. ONLY
    On receipt of your appliance please
    check it carefully for damage. Any
    damage found must be reported
    to the delivery driver immediately.
    Alternatively damage found must be
    reported to the retailer within 2 days of
    receipt.

    Contents
    1. GENERAL SAFETY RULES
    2. INSTALLATION
    3. PRACTICAL TIPS
    4. MAINTENANCE AND CLEANING

    Each product is identified by a unique 16character code, also called the “serial
    number”, printed on the sticker. This can be
    found inside the door opening. This code is
    a unique code for your product that you will
    need to register the product warranty, or if
    you need to contact the Customer Service
    Centre.

    5. PORTHOLE EMERGENCY OPENING
    6. WI-FI
    7. QUICK USER GUIDE
    8. CONTROLS AND PROGRAMS
    9. THROUBLESHOOTING AND WARRANTY

    3



  • Page 4

    in a safe way and understand the
    hazards involved.
    Children shall not play with the
    appliance. Cleaning and user
    maintenance shall not be made
    by children without supervision.

    1. GENERAL SAFETY
    RULES
    l This

    appliances is intended to
    be used in household and
    similar applications such as:
    - Staff kitchen areas in shops, offices
    and other working environments;
    - Farm houses;
    - By clients in hotels, motels and
    other residential type environments;
    - Bed and breakfast type environments.
    A different use of this appliance
    from household environment
    or from typical housekeeping
    functions, as commercial use by
    expert or trained users, is excluded
    even in the above applications. If
    the appliance is used in a manner
    inconsistent with this it may reduce
    the life of the appliance and may
    void the manufacturer’s warranty.
    Any damage to the appliance or
    other damage or loss arising
    through use that is not consistent
    with domestic or household use
    (even if located in a domestic or
    household environment) shall not
    be accepted by the manufacturer to
    the fullest extent permitted by law.

    l Children

    should be supervised
    to ensure that they do not play
    with the appliance.

    l Children

    of less than 3 years
    should be kept away unless
    continuously supervised.

    l If

    the supply cord is damaged, it
    must be replaced by the
    manufacturer, its service agent
    or similarly qualified persons in
    order to avoid a hazard.

    l Only

    use
    the
    hose-sets
    supplied with the appliance for
    the water supply connection
    (do not reuse old hose-sets).

    l Water

    pressure must be between
    0.05 MPa and 0.8 MPa.

    l Make

    sure carpets or rugs do
    not obstruct the base or any of
    the ventilation openings.

    l This

    appliance can be used by
    children aged from 8 years and l After installation, the appliance
    above and persons with reduced
    must be positioned so that the
    physical, sensory or mental
    plug is accessible.
    capabilities or lack of experience
    and knowledge if they have been l The maximum load capacity of
    dry clothes depends on the
    given supervision or instruction
    model used (see control panel).
    concerning use of the appliance
    4



  • Page 5

    l To

    consult the product technical
    specification please refer to the
    manufacturer website.

    Electrical connections
    safety instructions

    WARNING:
    water may reach very high
    temperatures during the
    wash cycle.

    and

    l Do

    not expose the washing
    machine to rain, direct sunlight
    or other weather elements.
    Protect from possible freezing.

    l The

    technical details (supply
    voltage and power input) are
    indicated on the product rating
    plate

    l When moving, do not lift the
    washing machine by the knobs
    sure that the electrical
    or detergent drawer; during
    system is earthed, complies
    transport, never rest the door on
    with all applicable law and that
    the trolley. We recommend two
    the (electricity) socket is
    people lift the washing machine.
    compatible with the plug of the
    appliance. Otherwise, seek
    qualified professional assistance. l In the event of fault and/or
    malfunction, turn off the
    washing machine, close the
    l The use of converters, multiple
    water tap and do not tamper
    sockets or extension cords is
    with the appliance.
    strongly advised against
    Immediately
    contact
    the
    Customer Service Centre and
    l Before cleaning or maintaining
    only use original spare parts.
    the washing machine, unplug
    Failure to observe these
    the appliance and turn off the
    instruction may jeopardise
    water tap.
    appliance safety.
    l Do not pull on the power cord
    or appliance to unplug the
    machine.
    l Make

    l Make

    sure there is no water in
    the drum before opening the
    door.
    5



  • Page 6

    2. INSTALLATION
    l Remove

    the 2 or 4 transportation
    screws (A) on the back and
    remove the 2 or 4 flat washers,
    rubber bungs and plastic spacer
    tubes (B) as illustrated in figure 1.
    l If the washing machine is built-in,
    unscrew the 3 or 4 transportation
    screws (A) and remove the 3 or 4
    flat washers, rubber bungs and
    plastic spacer tubes (B).
    l During the removal of the screws
    occasionally spacer tubes fall
    inside the product, these can be
    remove by tilting the product forward
    and recovering them from the floor or
    inside the base of the machine.
    l Cover the open transportation screw
    holes with the 2 or 4 plastic caps
    included in the instruction bag.

    1
    A
    B
    A
    B

    B
    B

    A
    A

    2
    A
    1

    2

    3

    WARNING:
    keep packaging materials
    away from children.
    l Place

    the corrugated plastic sheet,
    found on top of the appliance during
    the unpacking process, into the base
    of the appliance as shown in figure 2
    (according to the model, consider
    version A, B or C).

    B

    In some models this operation
    will not be necessary, because
    the corrugated plastic sheet
    will be already placed on the
    bottom of the appliance.

    C
    3
    2

    6

    1



  • Page 7

    Hydraulic connections

    3

    l Connect the water hose to the water
    supply tap (fig. 3) only using the hose
    supplied with the appliance (do
    not
    reuse old hose-sets).

    l Some models may include one or more of
    the following features:

    l HOT&COLD (fig. 4):
    water mains connection settings with hot
    and cold water for higher energy savings.
    Connect the grey tube to the cold water
    tap
    and the red one to the hot water
    tap. The machine can be connected to
    the cold water tap only: in this case, some
    programs may start a few minutes later.

    4
    1

    l AQUASTOP (fig. 5):
    a device located on the supply tube that
    stops water flow if the tube deteriorates;
    in this case, a red mark will appear in the
    window “A” and the tube must be
    replaced. To unscrew the nut, press the
    one-way lock device "B".

    5

    6
    B

    l AQUAPROTECT – SUPPLY TUBE WITH
    GUARD (fig. 6):
    Should water leak from the primary
    internal tube "A", the transparent
    containment sheath "B" will contain water
    to permit the washing cycle to complete.
    At the end of the cycle, contact the
    Customer Service Centre to replace the
    supply tube.

    A

    B
    A

    7

    Setting
    l The washing machine should be installed
    in its final position such that the water fill
    hose is not kinked or trapped. The
    corrugated drain hose should be inserted
    into suitable drain pipe of between 50 cm
    and 85 cm height above the floor using
    the curved drain hose support. If an under
    sink connection is used the drain hose
    must be routed above the sink overfill
    opening to prevent back siphoning. Care
    must be taken to avoid kinking or trapping
    the drain hose (fig. 7).

    max 100 cm

    min 4 cm

    7

    +2,6 mt
    max

    min 50 cm
    max 85 cm



  • Page 8

    l Level the appliance using the feet as

    8

    illustrated in figure 8:
    a. turn the nut clockwise to release the
    screw;
    b. rotate the foot to raise or lower it until it
    touches to the floor;
    c. lock the foot, screwing in the nut, until it
    tightens against to the bottom of the
    washing machine.
    l Plug in the appliance.

    A

    B

    WARNING:
    contact the Customer Service Centre
    should
    the
    power
    cord
    need
    replacement.

    C

    Detergent drawer
    The detergent draw is split into 3
    compartments as illustrated in figure 9:
    l compartment "1": for prewash detergent;
    l compartment “ ”: for special additives,
    softeners, starch fragrances, etc.;
    WARNING:
    only use liquid products; the washing
    machine is set to automatically dose
    additives at each cycle during the last
    rinse.

    l compartment "2": for washing detergent.
    A liquid detergent cup is also included IN
    SOME MODELS (fig. 10). To use it, place it
    in compartment "2". This way, liquid
    detergent will only enter the drum at the
    right time. The cup can also be used for
    bleach when the “Rinse” program is
    selected.
    WARNING:
    some detergents are not designed for
    use in the dispenser drawer but are
    supplied with their own dispenser that
    is placed in the drum directly.

    WARNING:
    installation faults are not covered by
    the manufacturers warranty.

    8



  • Page 9

    reduce the necessity of a hot wash
    programme.
    Save up to 50% energy by using a 60°C
    wash programme.

    3. PRACTICAL TIPS
    Load tips
    WARNING: when sorting laundry, make
    sure:

    Before using a drying
    (WASHER-DRYERS)

    - have eliminated metallic objects such as
    hair clips, pins, coins, from laundry;

    l SAVE energy and time by selecting a

    programme

    high spin speed to reduce the water
    content in laundry before using a drying
    programme.

    - to have buttoned pillow cases, closed
    zips, tied loose belts and long robe
    ribbons;

    Following is a quick guide with tips and
    recommendations on detergent use at the
    various temperatures. In any case, always
    read the instructions on the detergent for
    correct use and doses.

    - to have removed rollers, hooks or clips
    from curtains;
    - to have carefully read clothing washing
    labels;
    - to have removed any persistent stains
    using specific detergents.

    When washing heavily soiled whites,
    we
    recommend
    using
    cotton
    programs of 60°C or above and a
    normal washing powder (heavy duty)
    that contains bleaching agents that at
    medium/high
    temperatures
    provide
    excellent results.

    l When washing rugs, bedcovers or other
    heavy clothing, we recommend you avoid
    the spinning cycle.

    l To wash wool, make sure the item can be
    machine washed. Check the fabric label.

    Helpful suggestions for the user

    For washes between 40°C and 60°C
    the type of detergent used needs to be
    appropriate for the type of fabric and
    level of soiling.
    Normal powders are suitable for “white”
    or colour fast fabrics with high soiling,
    while liquid detergents or “colour
    protecting” powders are suitable for
    coloured fabrics with light levels of
    soiling.

    A guide environmentally friendly and
    economic use of your appliance.
    Maximise The Load Size

    l Achieve the best use of energy, water,
    detergent and time by using the
    recommended maximum load size.
    Save up to 50% energy by washing a full
    load instead of 2 half loads.
    Do you need to pre-wash?

    For washing at temperatures below
    40°C we recommend the use of liquid
    detergents or detergents specifically
    labeled as suitable for low temperature
    washing.

    l For heavily soiled laundry only!
    SAVE detergent, time, water and
    between 5 to 15% energy consumption
    by NOT selecting Prewash for slight to
    normally soiled laundry.

    For washing wool or silk, only use
    detergents specifically formulated for
    these fabrics.

    Is a hot wash required?

    l Pretreat stains with stain remover or soak
    dried in stains in water before washing to

    9



  • Page 10

    l Remove and clean the filter; when

    4. MAINTENANCE AND
    CLEANING

    finished, replace it turning it clockwise.
    The filter handle will be locked when it is
    not possible to turn any further and the
    handle is horizontal. Smearing a small
    amount of liquid soap on the filter seal will
    help refitting.

    To clean the washing machine exterior, use
    a damp cloth, avoiding abrasives, alcohol
    and/or solvents. To maintain a good wash
    performance we recommend that the soap
    drawer and pump filters are regularly
    cleaned. A monthly service wash, using a
    proprietary cleaner is also recommended.

    l Repeat the previous steps in reverse
    order to reassemble all parts.

    Drawer cleaning
    l We recommend you clean the drawer to
    avoid accumulating
    additive residue.

    detergent

    and

    l To do this, extract the drawer using slight
    force, clean it with running water and
    reinsert it in its housing.

    l Ensure the siphon cap is correctly

    S u g g e s tio n s fo r m o v e s o r
    prolonged disuse

    refitted.

    Filter cleaning

    l Should the washing machine be stored in
    an unheated room for a long period of
    time, drain all water from tubes.

    l The washing machine comes with a
    special filter able to trap large residue,
    such as buttons or coins, which could
    clog the drain.

    l Unplug the washing machine.
    l Detach the tube from the drainage
    system and clip on the rear of the
    machine and lower it, fully draining water
    into a bowl.

    l ONLY AVAILABLE ON CERTAIN MODELS:
    pull out the corrugated hose, remove the
    stopper and drain the water into a
    container.

    l Secure the drain tube with the drainage
    system and clip on the rear of the
    machine when finished.

    l Ensure all the water has been emptied

    l Keep the door glass and gasket clean.

    from the drum.

    l Before

    unscrewing the filter, we
    recommend you place an absorbent cloth
    under it to keep the floor dry. A small
    amount of water will come out of the filter
    as you remove it - this is normal.

    The manufacturers warranty only
    covers faults within the product of a
    mechanical or electrical nature.
    Faults
    caused
    by
    handling,
    installation or miss use are not
    covered and may incur a charge for
    any repair visit to resolve.

    l Turn the filter counter-clockwise to the
    limit stop.

    10



  • Page 11

    5. PORTHOLE EMERGENCY OPENING
    Should the porthole be locked due to power
    shortage or as a result of a fault, it can be
    opened according to the following
    emergency unlocking procedure:
    1. Disconnect the machine from the power
    socket.
    2. Ensure that the water level is below the
    porthole before opening it, to prevent any
    flooding. Otherwise, drain excess water
    through the drain tube and collect it in a
    bucket.
    3. Take out the detergent compartment
    (fig. 1).
    4. Lever with a screw driver or similar tool,
    as shown in figure 2, to operate the
    emergency device. Carry out the same
    procedure 2 times, then open the
    porthole.

    11



  • Page 12

    6. WI-FI
    This appliance is equipped with Wi-Fi
    technology that allows you to control it
    remotely via App, thanks to Wi-Fi function.

    Get all the details of the Wi-Fi
    functions by browsing the App in
    DEMO mode.

    l Open the App, create the user profile and

    MACHINE ENROLLMENT (ON APP)

    enroll the appliance following the
    instructions on the device display or the
    "Quick Guide" attached on the machine.

    l Download the Candy simply-Fi App on
    your device.

    The Candy simply-Fi App is available
    for devices running both Android and
    iOS, both for tablets and for
    smartphones.

    ENABLE REMOTE CONTROL (VIA APP)
    After the machine enrollment, every time
    you want to manage it remotely through the
    App, firstly you have to load the laundry, the
    detergent, close the door and select the
    Wi-Fi position on the machine. From that
    moment on you can manage it through the
    App commands.

    12



  • Page 13

    7. QUICK USER GUIDE
    This washing machine automatically adjusts
    the level of the water to the type and
    quantity of washing. This system gives a
    reduction in energy consumption and a
    saving in washing times.

    8. CONTROLS AND
    PROGRAMS

    Program selection
    l Turn on the appliance and select the
    required program.

    l Adjust the washing settings if necessary
    and select the required options.
    DRYING (WASHER-DRYERS only)
    If you would like the drying cycle
    to begin
    automatically
    after
    washing, select
    the
    washing
    program required and select the
    drying cycle by the "SET" button.
    Or you can finish the wash and
    then select the drying program.

    l Press the START/PAUSE button to start
    the program.

    l At the end of the program, the message
    "END" will appear on the display

    l Turn off the washing machine.
    For any type of wash, see the program
    table and follow the operating sequence
    as indicated.

    Technical data
    Water pressure:
    min 0.05 Mpa / max 0.8 Mpa
    (0.05 MPa dispenses approximately 1 litre
    of water in 10 seconds)
    Spin r.p.m.: See rating plate.
    Power input / Power current fuse amp /
    Supply voltage: See rating plate.

    13

    A ON/OFF button
    B SMART RING (ring for selecting
    PROGRAMMES/OPTIONS)
    C START/PAUSE button
    D SET/CONFIRM button
    E OPTION area
    F ZOOM function button
    D+F BUTTON LOCK
    G DISPLAY
    H Wi-Fi position/Wi-Fi indicator
    light
    I PROGRAMME area



  • Page 14

    SMART RING (ring for selecting
    PROGRAMMES/OPTIONS)

    WARNING:
    Do not touch the display while fitting the
    plug, because during the initial seconds,
    the machine performs a self-calibration
    that might be interrupted: if this
    occurs, the machine may not operate
    properly. In this case, remove the plug
    and repeat the operation.

    l After turning the appliance on, rotating
    the "SMART RING" the icons for the
    programmes will light up and the display
    will show the description and the relevant
    parameters.

    l To start the selected cycle with the preset
    parameters, press START/PAUSE.

    ON/OFF button

    When the appliance is turned on again,
    the last programme will be shown,
    memorising the previously set values.

    l To turn the appliance on and off, press
    the ON/OFF button.

    l If the selected programme is to be
    modified, press "SET" and rotate the
    "SMART RING" next to the icon of the
    selected option; then, press "SET" again.

    At the end of the cycle, do not forget
    to turn off the appliance by the
    ON/OFF button, disconnect the plug
    and close the water faucet.

    l Rotating the "SMART RING" you can
    display the available selections for the
    set option. To confirm press "SET", then
    press START/PAUSE to start the cycle or
    repeat the operation for other options.

    First starting
    Language setting

    Only the options compatible with the
    set programme can be selected.

    l After connecting the machine to the
    network and turning it on, turn the
    "SMART RING" to display the available
    languages.

    To cancel the program selection, turn
    the "SMART RING" to the program
    area and press "SET".

    l Select the desired language by turning
    the "SMART RING" and confirm by
    pressing "SET". From now on, you can
    select and start programs.

    When the programme is running, the
    display will show the time to elapse.
    Rotating the "SMART RING" all
    information about the cycle will be
    displayed.

    Change the language
    If you want to change the setting language
    you will have to hold the "SET" button
    down for 5 seconds. The welcome
    message will appear on the display, and by
    turning the "SMART RING" you will be able
    to choose a new language.
    Through this process
    settings will be cancelled.

    all

    START/PAUSE button
    Close the porthole BEFORE pressing
    the START/PAUSE button.

    saved

    l Press to start the set cycle.
    14



  • Page 15

    After starting the washing machine
    you need to wait a few seconds before
    the appliance starts the programme.

    To prevent damage to the fabrics, it is
    not
    possible
    to
    increase
    the
    temperature above the maximum
    value set for each programme.

    CYCLE DURATION

    l When a programme is selected the
    display automatically shows the cycle
    duration, which can vary, depending on
    the options selected.

    l Once the programme has started you will
    be kept informed constantly of the time
    remaining to the end of the wash.

    - SPIN SELECTION

    l By this option you can reduce the
    maximum spin speed for the set
    programme, until it is completely excluded.

    l If

    the label does not show any
    instructions, you can spin to the
    maximum speed set for the programme.

    l The appliance calculates the time to the
    end of the selected programme based
    upon a standard loading, during the cycle,
    the appliance corrects the time to that
    applicable to the size and composition of
    the load.
    ADD OR REMOVE ITEMS AFTER THE
    PROGRAMME HAS STARTED (PAUSE)

    To prevent damage to the fabrics, it is
    not possible to increase the speed
    over the maximum one set for each
    programme.

    l It is possible to modify the spin speed at
    any time, without shifting the machine to
    PAUSE.

    l Press START/PAUSE (the display shows
    PAUSE).
    Ensure that the water level is below
    the porthole before opening it, to
    prevent any flooding.

    l After adding or removing items, close the
    porthole and press START/PAUSE (the
    programme will resume from when it was
    interrupted).
    CANCELLING THE SET PROGRAMME

    l To cancel the programme, press the
    ON/OFF button for about 2 seconds until
    the display switches off.

    OPTION area

    An over dosing of detergent can
    cause excessive foaming. If the
    appliance detects the presence of
    excessive foam, it may exclude the
    spinning phase or extend the duration
    of the programme and increase water
    consumption.

    The machine is fitted with a special
    electronic device, which prevents the
    spin cycle should the load be
    unbalanced.
    This
    reduces
    the
    vibration, improves noise reduction and
    prolongs the life of the washing
    machine.
    - DELAY START

    l By this option you can programme the

    The options must be selected before
    pressing the START/PAUSE button.

    start of the washing cycle.

    l Selecting the dedicated icon by the

    - TEMPERATURE SELECTION

    l By this option you can change the

    "SET" button you can set a delay from 1
    hour to max. 24 hours.

    l Confirm pressing the "SET" button.

    temperature of the washing cycles.

    15



  • Page 16

    l Press START/PAUSE

    l Press START/PAUSE to start washing.

    to start the
    counting at the end of which the
    programme will automatically start.

    Setting AFTER having selected one or
    more options

    l The delay start can be cancelled, pressing

    l Press "ZOOM" to activate the function.

    the ON/OFF button for about 2 seconds,
    until the display switches off.

    The display shows the new information
    about the cycle.

    - VAPOUR

    l The previously set options will be
    automatically upgraded to the new length
    of the programme and the NON
    compatible ones will be cancelled. The
    previously set temperature and spin
    levels will not be exceeded to safeguard
    the fabrics and for getting the best
    washing result in a shorter time.

    l By this option you can add a specific
    steam treatment to some washing cycles
    (see programme table).

    l The steam function relaxes the folds and
    makes ironing times shorter.

    l Fibres are regenerated and refreshed,

    l Press START/PAUSE to start washing.

    removing all smells from the items.

    l A dedicated steam treatment was devised

    In addition, the "ZOOM" function can
    be activated within 15 seconds from
    the start of the washing cycle.

    for each programme, to guarantee
    washing top efficiency depending on item
    fabrics and colours.

    l To

    deactivate the function, press
    "ZOOM" again (the previously set options
    will be reset).

    ZOOM function button
    l By

    activating the "ZOOM" function
    through the dedicated button, each
    fabrics can be washed in less than
    59 minutes in the programmes that
    include it (see programme table) while
    guaranteeing washing performance.

    In addition, the "ZOOM" function can
    be deactivated within 15 seconds from
    the start of the washing cycle.

    l With the exclusive "Mix Power Jet+"

    BUTTON LOCK

    system the detergent is injected and
    immediately activated in the core of the
    fabrics, guaranteeing a deep washing
    result.

    l The simultaneous press of "SET" and
    "ZOOM" buttons for about 3 seconds
    can lock the buttons. In this way, you can
    avoid involuntary or accidental modifications.

    Setting BEFORE selecting one or more
    options

    l The button lock can be cancelled by

    l After selecting the programme, press

    simply pressing the two activation buttons
    and turning the appliance off.

    "ZOOM" to activate the function. The
    display shows the new information about
    the cycle.

    In case of power shortage while the
    washing machine is running, a special
    memory will keep the setting and, when
    powers come back, the machine will
    resume from when it had stopped.

    l The options of the programme can be
    modified only in agreement with the new
    length of the programme.

    16



  • Page 17

    Table of programmes

    1)

    2)

    (MAX.)

    2

    (see control panel)

    PROGRAMME

    COTTON**

    3)
    3)

    DELICATE
    PERFECT 20°

    3)

    Standard*

    1

    3

    8 3,5

    9

    4

    10 4,5

    90°

    ( )

    7

    3

    8 3,5

    9

    4

    10 4,5

    60°

    ( )

    4 2,5 4,5 2,5

    5

    3

    40°

    ( )

    2

    2

    2

    40°

    1
    3)

    2

    7

    3)
    SYNTHETIC
    3,5 2
    AND COLOURED

    WOOL

    Standard*

    Standard*

    (MAX.)
    Standard*

    COTTON
    STRONG

    1

    1

    2

    2

    2

    2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5
    10 4,5

    40°
    20°

    7

    3

    8 3,5

    9

    4

    RINSE

    -

    -

    -

    -

    -

    -

    -

    -

    -

    DRAIN & SPIN

    -

    -

    -

    -

    -

    -

    -

    -

    -

    Position that you have to select when you want to enable remote control through the
    App (via Wi-Fi).

    17



  • Page 18

    Please read these notes:
    1) Maximum load capacity of dry clothes,
    according to the model used (see control
    panel).

    container, inserted into the compartment
    marked "2" in the detergent drawer,
    and set the special programme RINSE.
    When this phase has terminated,
    switch off the appliance, add the
    rest of the fabrics and proceed
    with a normal wash on the most
    suitable programme.

    2) When a program is selected, on the
    display is shown the recommended wash
    temperature that can be reduced (where
    allowed) by setting the TEMPERATURE
    option through the "SET" button.
    However it’s not possible to increase this
    option beyond
    the maximum value
    given.

    ** STANDARD COTTON PROGRAMMES
    ACCORDING TO (EU) No 1015/2010 and
    No 1061/2010.
    COTTON PROGRAMME
    TEMPERATURE OF 60°C.

    WITH

    A

    3) Steam Function Available.

    COTTON PROGRAMME
    TEMPERATURE OF 40°C.

    WITH

    A

    *

    Default
    option).

    program

    (without

    "ZOOM"

    These programmes are suitable to
    clean normally soiled cotton laundry and
    they are the most efficient programmes
    in terms of combined energy and water
    consumptions for washing cotton
    laundry.
    These
    programmes
    have
    been
    developed to be compliant with the
    temperature on the wash label on the
    garments and the actual water
    temperature may slightly differ from the
    declared temperature of the cycle.

    ( ) The pre-wash option is available only by
    selecting the program through the App.
    (Only
    for
    models
    with
    liquid
    detergent compartment)
    When only a limited number of articles
    have stains which require treatment with
    liquid bleaching agents, preliminary
    removal of stain can be carried out in
    the washing machine.
    Pour the bleach into the liquid bleach

    18



  • Page 19

    Programmes selection
    To clean different types of fabrics and
    various levels of dirt, the washing machine
    has specific programs to meet every need
    of washing (see table of programmes).
    COTTON STRONG
    Made to have a perfect washing. The final spin
    at maximum speed gives more efficient
    removal.
    COTTON
    This program is suitable to clean normally soiled
    cotton laundry and it is the most efficient program
    in terms of combined energy and water
    consumptions for washing cotton laundry.
    SYNTHETIC AND COLOURED
    This programme allows you to wash
    different type’s fabrics and different colours
    all together. The rotation movement of the
    drum and the water levels are optimized,
    both during the washing the rinsing phase.
    The accurate spin action, ensures a
    reduced formation of creases in the fabrics.
    Thanks to "Mix Power Jet+" technology, a
    complete washing cycle optimization is
    possible.

    WARNING:
    New coloured garments should be
    washed separately for at least 5 or 6
    washes.

    DELICATE
    This program has reduced periods of drum
    rotation during the cycle and is particularly
    suitable or washing delicate fabrics. The
    wash cycle and rinses are carried out with a
    high level of water to ensure the best
    performance.
    PERFECT 20°
    innovative
    "Mix
    Power
    Jet+"
    This
    technology, allows you to wash fabrics such
    as cottons, synthetics and mixed fabrics at
    20°C with a performance which is
    comparable to a 40°C wash.
    The consumption of this programme is
    about 50% of a conventional 40°C. Cottons
    wash.
    We suggest a wash load equal to 2/3 of the
    maximum capacity of the machine.
    RINSE
    This program performs 3 rinses with an
    intermediate spin (which can be reduced or
    excluded by using the appropriate button) . It
    is used for rinsing any type of fabric, for
    example after a wash carried out by hand.
    DRAIN & SPIN
    The program completes the drain and a
    maximum spin. It is possible to delete or
    reduce the spin with the SPIN option
    through the "SET" button.
    Wi-Fi
    Position that you have to select when you
    want to enable remote control through the
    App (via Wi-Fi). In this case, the start of
    cycle will take place through the App
    commands.

    Certain large dark items such as jeans
    and towels should always be washed
    separately.
    Never mix NON COLOURFAST fabrics.

    WOOL
    This program performs a wash cycle
    dedicated to the wool fabrics that can be
    washed in a washing machine, or the
    articles to be washed by hand.

    19



  • Page 20

    9. THROUBLESHOOTING AND WARRANTY
    If you believe the washing machine is not working correctly, consult the quick guide
    provided below which includes some practical tips on how to fix the most common
    problems.
    ERROR CODE FORMAT

    l Models with a display: the error is shown by a number preceded by the letter “E”
    (example: E2 = Error 2).

    l Models without display: an error is shown by a sequence of flashes of every LED.
    The error code is shown by the number of flashes followed by a pause of 5 seconds
    (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).

    Error shown
    E2 (with display)
    2 flashes of the LEDs
    (without display)

    Possible causes and practical solutions
    The machine cannot load water.
    Make sure the water supply tap is open.
    Make sure the water supply hose isn’t bent, kinked or trapped.
    Make sure the drain pipe is at the proper height (see installation section).

    E3 (with display)
    3 flashes of the LEDs
    (without display)
    E4 (with display)
    4 flashes of the LEDs
    (without display)
    E7 (with display)
    7 flashes of the LEDs
    (without display)

    Any other code

    Close the water supply tap, unscrew the filler hose from the back of
    the washing machine and make sure the “anti-sand” filter is clean
    and not blocked.
    The washing machine does not drain water.
    Make sure the filter is not clogged.
    Make sure the drain hose isn’t bent, kinked or trapped.
    Make sure the home drainage system is not blocked and is allowing
    water to flow through without obstruction. Try to drain the water in the sink.
    There is too much foam and/or water.
    Ensure the correct amount of detergent is being used and the
    detergent is designed for use in a washing machine.
    Door problem.
    Make sure the door is correctly closed.
    Make sure the clothes inside the drum are not preventing the door
    from closing fully.
    If the door is locked, turn off and unplug the washing machine from
    the electrical supply socket, wait 2-3 minutes and reopen the door.
    Turn off and unplug the washing machine, wait a minute. Turn on the
    machine and restart a program. If the error occurs again contact an
    Authorised Customer Service Centre directly.

    20



  • Page 21

    OTHER ANOMALIES
    Problem

    Possible causes and practical solutions

    The washing machine
    does not work / start

    The washing machine
    does not spin

    Make sure the product is plugged into a working supply socket.
    Make sure power is on.
    Make sure the wall socket is working, testing it with another
    appliance such as a lamp.
    The door may not be correctly closed: open and close it again.
    Check whether the required program was correctly selected and the
    start button pressed.
    Make sure the washing machine is not in pause or time delay mode.
    This may be due to a leak from the seal between the tap, supply
    hose and fill valve; in this case, replace it and tighten the hose
    connections correctly.
    Make sure the front filter is correctly closed.
    The machine is fitted with a detection system that protects the load
    and product from damage if the load is not balanced before spinning.
    This may result in:• The machine attempts to balance the load, increasing the time of
    spin.
    • Reduction of the speed of spin to decrease vibrations and noise.
    • The spin cycle aborting to protect the machine and load.
    If this is experienced remove the load de-tangle it, reload it and
    restart the spin program.
    This could be due to the fact that water has not been completely
    drained: wait a few minutes. If the problem persists, see Error 3
    section.
    Some models include a "no spin" function: make sure it is not
    selected.
    Check which options are selected and their effect on the spin cycle.

    Strong vibrations /
    noises are heard
    during the spin cycle

    Excessive detergent can impede the spin cycle, ensure the correct
    amount of detergent is being used.
    The washing machine may not be fully levelled: if necessary, adjust
    the feet as indicated in the specific section.
    Make sure transport screws, rubber bungs and spacer tubes were
    removed.
    Make sure there are no foreign objects inside the drum (coins,
    hinges, buttons, etc…).

    Water leaked on the
    floor near the
    washing machine

    The standard manufacturer warranty covers faults caused by electrical or
    mechanical faults in the product due to an act or omission of the manufacturer. If
    a fault is found to be caused by factors outside the product supplied, miss-use or
    as a result of the instructions on use not being followed, a charge may be
    applied.

    21



  • Page 22

    The use of ecological detergents without
    phosphates may cause the following effects:

    Warranty
    The product is guaranteed under the
    terms and conditions stated on the
    certificate included with the product. The
    warranty certificate must be duly filled in
    and stored, so as to be shown to the
    Authorised Customer Service Centre in
    case of need. Proof of purchase must
    be made available at the time of any
    warranty related repair.

    - cloudier rinse drain water: This effect is
    tied to the suspended zeolites which do
    not have negative effects on rinse
    efficiency.
    - white powder (zeolites) on laundry at
    the end of the wash: this is normal, the
    powder is not absorbed by fabric and
    does not change its colour.
    To remove the zeolites, select a rinse
    programme. In the future consider using
    slightly less detergent.
    - foam in the water at last rinse: this
    does not necessary indicate poor rinsing.
    Consider using less detergent in future
    washes.
    - abundant foam: This is often due to the
    anionic surfactants found in the
    detergents which are hard to eliminate
    from laundry.
    In this case, do not re-rinse to eliminate
    these effects: it will not help at all.
    We suggest conducting a maintenance
    wash using a proprietary cleaner.
    If the problem persists or if you suspect a
    malfunction, immediately contact an
    Authorised Customer Service Centre.
    It is always recommended to use original
    spare parts, that are available at our
    Authorised Customer Service Centres.

    By placing the
    mark on this
    product, we are confirming compliance to
    all relevant European safety, health and
    environmental requirements which are
    applicable in legislation for this product.

    The manufacturer declines all
    responsibility for any printing errors in
    the booklet included with this product.
    Moreover, it also reserves the right to
    make any changes deemed useful to its
    products without changing their essential
    characteristics.

    22



  • Page 23

    WIRELESS PARAMETERS
    Parameter

    Specifications
    (Wi-Fi)

    Specifications
    (Bluetooth)

    Wireless Standard

    802.11 b/g/n

    Bluetooth v4.2

    Frequency range

    2,412 GHz. - 2,484 GHz.

    2,412 GHz. - 2,484 GHz.

    802.11b, DSSS 1 Mbps =
    +19.5 dBm

    Basic data Rate:
    RF Transmit Power (Typ):
    +4 dBm

    802.11b, CCK 11 Mbps =
    +18.5 dBm
    Max Trasmit Power
    802.11g, OFDM 54 Mbps =
    +18.5 dBm
    802.11n, MCS7 =
    +14 dBm
    802.11b = 1024 bytes,
    -80 dBm
    802.11g = 1024 bytes,
    Minimum Receiving
    Sensivity

    -70 dBm
    802.11n = 1024 bytes,
    -65 dBm
    802.11n HT40 = 1024 bytes,
    -65 dBm

    With this the

    Enhanced data Rate:
    RF Transmit Power (Typ):
    +2 dBm
    BLE
    RF Transmit Power (Typ):
    +7.5 dBm

    Basic data Rate:
    Sensivity @ 0.1% BER:
    -98 dBm
    Enhanced data Rate:
    Sensivity @ 0.01% BER:
    -98 dBm
    BLE
    Sensivity @ 0.1% BER:
    -98 dBm

    Candy Hoover Group Srl, declares that this appliance marked

    complies with the essential requirements of the Directive 2014/53/EU.
    with
    To receive a copy of the declaration of conformity, please contact the
    manufacturer at: www.candy-group.com

    23






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Candy Bianca WM wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Candy Bianca WM in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 4,03 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Candy Bianca WM

Candy Bianca WM Bedienungsanleitung - Deutsch - 24 seiten

Candy Bianca WM Bedienungsanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info