212657
6
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
6
Avoid exposing the scanner to rapid changes in temperature. If the room in
which the scanner is installed is cold but rapidly heated, water droplets
(condensation) may form inside the scanner. This may result in a noticeable
degradation in scanning quality.
The following conditions are recommended for optimal scanning quality:
- Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
- Humidity: 20% to 80% RH
Avoid installing the scanner near equipment that generates a magnetic field
(e.g. speakers, televisions, or radios.)
Connect only to a power outlet of the rated voltage and power supply frequency
(120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).
Do not connect other electrical equipment to the same power outlet to which
the scanner is connected. Also, when using an extension cord, make sure that
the extension cord is rated for the current requirements of the scanner.
Never disassemble or modify the AC adapter, as it is dangerous.
The power cord may become damaged if it is often stepped on or if heavy
objects are placed on it. Continued use of a damaged power cord and AC
adapter can lead to an accident, such as a fire or electrical shock.
Do not use the power cord while it is coiled.
Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
Keep the area around the power cord clear of objects so that the power cord can
be disconnected easily in an emergency.
Do not use an AC adapter other than the one provided with the scanner. Do not
use the AC adapter provided with the scanner with other products.
If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.
When moving the scanner, always hold it with both hands to avoid dropping it.
The scanner weighs approximately 5.3 lb (2.4 kg).
Make sure to disconnect the interface cable and AC adapter before moving the
scanner. If the scanner is transported with these items connected, the plugs and
connectors may be damaged.
AC Adapter
Moving the Scanner
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon dr-2010c wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info