745179
1
Zoom out
Zoom in
Nomenclature
Mount index (lens side)
Mount index (camera side)
Lens release lever
Rubber ring
Thank you for purchasing a Canon product.
The Canon Extender RF1.4x and Extender RF2x increase the focal
length of the attached RF lens by 1.4x and 2x respectively.
When Extender RF1.4x is attached, the lens maximum aperture will be
smaller (darker) by 1 stop. With Extender RF2x, the maximum aperture
will be smaller by 2 stops. In any case, the camera will compensate the
exposure automatically.
Caution
Details pertaining to risks that may result in injury or
damage to other objects.
Do not leave the product in places exposed to extremely high
or low temperatures. The product may cause burns or injury when
touched.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
■ Attaching and Detaching the Extender
First attach the Extender to the lens, then attach it to the camera.
To detach it, follow the same procedure in reverse.
To detach the Extender from the lens, slide the lens release lever and
then turn the Extender counterclockwise.
■ Safety Precaution
z
Do not leave the product in excessive heat such as in a car in direct
sunlight. High temperatures can cause the product to malfunction.
z
You cannot attach two or more Extenders on the same camera.
z
The rear mount on the Extender has been fitted with a rubber ring
to improve dust-resistance and water-resistance performance. This
rubber ring may cause friction marks to appear around the camera’s
lens mount, although this will have no effect on usage. Rubber rings
can be replaced at Canon Service Center (chargeable).
z
Using the Extender may limit the minimum shooting length possible
according to the product’s specifications.
z
Autofocusing slows down when the lens is used with the Extender, in
order to maintain the precision of autofocus control.
■ Usable RF Lenses
RF600mm F11 IS STM
RF800mm F11 IS STM
RF100-500mm F4.5-7.1 L IS USM
■ Specifications
Mount: Canon RF mount
Lens construction: RF1.4x: 7 elements in 4 groups
RF2x: 9 elements in 5 groups
Dimensions (Max. dia. x length):
RF1.4x: Approx. 71.2 dia. x 20.3 mm / 2.8 x 0.8 in.,
RF2x: Approx. 71.2 dia. x 39.3 mm / 2.8 x 1.5 in.
Weight: RF1.4x: Approx. 225 g / 7.9 oz.,
RF2x: Approx. 340 g / 12.0 oz.
Case: LP811
Front Cap: Extender Cap RF
Rear Cap: Lens Dust Cap RF
The maximum diameter, length and weight listed are for the Extender itself
only.
All data listed is measured according to Canon standards.
Product specifications and appearance are subject to change without
notice.
CT1-B085-A
1119Ni
©
CANON INC. 2019
Extender
RF1.4x / RF2x
Instructions
ENG

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

canon-extender-rf-1.4x

Suche zurücksetzen

  • Verändert sich durch die Verwendungs des Extenders auch der Mindestabstand zum Objekt? Eingereicht am 16-7-2023 14:15

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon Extender RF 1.4X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon Extender RF 1.4X

Canon Extender RF 1.4X Bedienungsanleitung - Deutsch - 1 seiten

Canon Extender RF 1.4X Bedienungsanleitung - Holländisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info